CHENMKO ENTERPRISE CO.,LTD BAV70BPT SURFACE MOUNT FAST SWITCHING DIODE VOLTAGE RANGE 100 Volts CURRENT 150 mAmpere FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * For surface mounted applications * Low profile package * Built-in strain relief * Low power loss, high efficiency * High current capability, low forward voltage drop * Power dissipation: 350mW * Repetitive peak forward surge current: 450mA * High temperature soldering guaranteed : 260oC/10 seconds at terminals SOD-123 MECHANICAL DATA 0.153(3.90) 0.140(3.55) 0.112(2.85) 0.098(2.50) 0.028(0.70) 0.018(0.45) Case: JEDEC SOD-123 molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.001 ounce 0.032 gram MARKING 2 0.071(1.80) 0.055(1.40) 0.053(1.35) 0.035(0.90) 1 MAX. 0.008(0.2) 0.004(0.12) * S1 0.02(0.5) Tpy MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SOD-123 MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL BAV70BPT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 100 Volts Maximum RMS Voltage VRMS 53 Volts Maximum DC Blocking Voltage VDC 75 Volts IO 150 mAmps Maximum Average Forward Rectified Current at TL = 100oC @ t=1.0uS Non-Repetitive Peak Forward Surge Current @ t=1.0S IFSM 2.0 1.0 Amps Typic Junction Capacitance (Note 2) CJ 2.0 pF Maximum Reverse Recovery Time (Note 3) TRR 4.0 nS R Typical Thermal Resistance (Note 1) Storage and Operating Temperature Range JA TJ, TSTG 357 -65 to +150 o C/W o C o ELECTRICAL CHARACTERISTICS ( At TA = 25 C unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage @ @ @ @ IF = 1.0 mA IF = 10 mA IF = 50 mA IF = 150 mA Maximum Average Reverse Current at Ratied DC Blocking Voltage @ @ @ @ VR = 20 V VR = 25 V, TJ=150OC VR = 75 V VR = 75 V, TJ=150OC SYMBOL BAV70BPT UNITS Volts VF 0.715 0.855 1.00 1.25 IR 25 30 2.5 50 nAmps uAmps uAmps uAmps NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.06 X 0.06" ( 0.15X 0.15mm ) copper pad area. 2. Measured at 1.0 MHZ and applied reverse voltage of 0 volt. 3. IF=IR=10 mA, IRR=0.1XIR, RL=100 ohms Volts 2002-9 FIG. 1 - TYPICAL FORWARD CURRENT DERAING CURVE 125 FIG. 2 - FORWARD CHARACTERISTICS 500 FORWARD CURRENT, (mA) AVERAGE FORWARD CURRENT, (%) RATING CHARACTERISTIC CURVES ( BAV70BPT ) 100 75 50 25 0 200 100 50 Ta=85oC 50oC 25oC 0oC o - 30 C 20 10 5 2 1 25 0 50 75 100 125 150 0 0.2 0.4 0.6 0.8 1.0 1.4 1.2 AMBIENT TEMPERATURE, ( C) FORWARD VOLTAGE, (V) FIG. 3 - TYPICAL JUNCTION CAPACITANCE FIG. 4 - REVERSE CHARACTERISTICS 2 1 1.6 100u f=1MHz REVERSE CURRENT, (nA) JUNCTION CAPACITANCE, (pF) o Ta=150oC 10u 100oC 1u 75oC 0.1u 25oC 10 1 0 0 2 4 6 8 10 12 14 REVERSE VOLTAGE, (V) 16 18 20 0 25 50 REVERSE VOLTAGE, (V) 75 100