TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor Automotive Transient Voltage Suppressors High Temperature Stability & High Reliability Conditions FEATURES • Patented PAR® construction • Available in Unidirectional polarity only • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Typical ID less than 1.0 µA above 10 V rating • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ted* n e t Pa * Patent #'s 4,980,315 5,166,769 5,278,094 Case Style MPG06 MAJOR RATINGS AND CHARACTERISTICS V(BR) 6.8 V to 43 V PPPM 400 W PD 1.0 W IFSM 40 A Tj max. 185 °C TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: MPG06, molded epoxy over passivated junction Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 µs waveform SYMBOL (1) (Fig. 1) LIMIT UNIT PPPM Minimum 400 W IPPM see next table A PD 1.0 W Peak pulse current with a 10/1000 µs waveform (1,2) (Fig. 3) Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 40 A Maximum instantaneous forward voltage at 25 A (2) VF 3.5 V Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Document Number 88404 13-Dec-06 www.vishay.com 1 TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) MAXIMUM BREAKDOWN DEVICE TYPE TMPG06-6.8 TMPG06-6.8A TMPG06-7.5 TMPG06-7.5A TMPG06-8.2 TMPG06-8.2A TMPG06-9.1 TMPG06-9.1A TMPG06-10 TMPG06-10A TMPG06-11 TMPG06-11A TMPG06-12 TMPG06-12A TMPG06-13 TMPG06-13A TMPG06-15 TMPG06-15A TMPG06-16 TMPG06-16A TMPG06-18 TMPG06-18A TMPG06-20 TMPG06-20A TMPG06-22 TMPG06-22A TMPG06-24 TMPG06-24A TMPG06-27 TMPG06-27A TMPG06-30 TMPG06-30A TMPG06-33 TMPG06-33A TMPG06-36 TMPG06-36A TMPG06-39 TMPG06-39A TMPG06-43 TMPG06-43A VOLTAGE V(BR) (1) AT IT (V) MIN MAX 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 STANDOFF TEST CURRENT VOLTAGE VWM IT (mA) (V) 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.0 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) REVERSE LEAKAGE AT VWM TJ = 150 °C ID (µA) PEAK PULSE CURRENT 300 300 150 150 50.0 50.0 10.0 10.0 5.0 5.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT LPPM VC (Volts) MAXIMUM TEMP. COEFFICIENT OF V(BR) (%/°C) 27.8 28.6 25.6 26.5 24.0 24.8 21.7 22.4 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.2 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.057 0.057 0.060 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 Note: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 Document Number 88404 13-Dec-06 TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY 0.218 54 5500 TMPG06-6.8AHE3/54 DELIVERY MODE 13" Diameter Paper Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 TMPG06-10 - TMPG06-43A 1.0 TMPG06-6.8 - TMPG06-9.1A IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 Tj = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 µsec. Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000 µsec. Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 td - Pulse Width (sec.) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 4.0 10000 CJ, Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 0.1 0.1 µs 75 50 25 Tj = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 100 Measured at Stand-off Voltage VWM 10 0 0 25 50 75 100 125 150 175 200 1.0 10 100 Tj - Initial Temperature (°C) V(BR) - Breakdown Voltage (V) Figure 2. Pulse Power or Current versus Initial Junction Temperature Figure 4. Typical Junction Capacitance Document Number 88404 13-Dec-06 200 www.vishay.com 3 TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor 100 60 Hz Resistive or Inductive Load Tj = 75 °C 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) PD, Power Dissipation (W) 1.00 0.75 0.50 L = 0.375" (9.5 mm) Lead Lengths 0.25 0 10 0 25 50 75 100 125 150 175 1 200 10 100 TL - Lead Temperature (°C) Number of Cycles at 60 Hz Figure 5. Power Derating Curve Figure 6. Maximum Non-Repetitive Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style MPG06 0.100 (2.54) 0.090 (2.29) DIA 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. www.vishay.com 4 Document Number 88404 13-Dec-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1