CHENMKO ENTERPRISE CO.,LTD P6SBMJ GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 200 VOLTS 600 WATTS PEAK POWER 5.0 WATTS STEADY STATE SERIES FEATURES * * * * * * Plastic package 600W surge capability at 1ms Glass passivated chip junction in SMB Package Excellent clamping capability Low Zener lmpedance Fast response time: typically less than 1.0ps from 0 volts to BV min. * Typical IR less than 1 uA above 10V * High temperature soldering guaranteed : 260oC/10 seconds at terminals SMB 0.083 (2.11) 0.077 (1.96) 0.155 (3.94) 0.130 (3.30) (1) (2) 0.190 (4.57) MECHANICAL DATA 0.160 (4.06) Case: JEDEC SMB molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.003 ounce 0.093 gram 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. 0.008 (0.203)(max) 0.220 (5.59) 0.205 (5.21) Dimensions in inches and (millimeters) SMB DEVICES FOR BIDIRECTIONAL APPLICATIONS For Bidirectional use C or CA Suffix for types P6SBMJ6.8A thru types P6SBMJ200A Electrical characteristics apply in both directions. MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL VALUE UNITS Peak Power Dissipation at TA = 25oC, Tp = 1ms ( Note1 ) PPK Minimum 600 Watts Steady State Power Dissipation at TL = 75oC PD 5.0 Watts IFSM 100 Amps TJ, TSTG -65 to +175 Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load ( Note 2 ) Operating and Storage Temperature Range NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25oC per Fig. 2. 2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. 3. PC Board Mounted on 0.2 X 0.2" ( 5 X 5mm ) copper pad area o C 2003-01 Breakdown Voltage PRODUCT NO. VBR Volts ( NOTE 1 ) @ IT ( mA ) Working Peak Reverse Voltage Maximum Reverse Leakage at Vrwm Vrwm ( V ) Ir ( uA ) Maximum Reverse Current ( NOTE 2 ) Irsm ( A ) Maximum Reverse Voltage at Irsm ( clamping ) Maximum Temperature Coefficient of Vbr Vrsm ( V ) ( %C ) MIN. NOM. MAX. P6SBMJ6.8APT 6.45 6.8 7.14 10 5.80 1000 57 10.5 0.057 P6SBMJ7.5APT 7.13 7.5 7.88 10 6.40 500 53 11.3 0.061 P6SBMJ8.2APT 7.79 8.2 8.61 10 7.02 200 50 12.1 0.065 P6SBMJ9.1APT 8.65 9.1 9.55 1.0 7.78 50 45 13.4 0.068 P6SBMJ10APT 9.5 10 10.5 1.0 8.55 10 41 14.5 0.073 P6SBMJ11APT 10.5 11 11.6 1.0 9.40 5.0 38 15.6 0.075 P6SBMJ12APT 11.4 12 12.6 1.0 10.2 5.0 36 16.7 0.078 P6SBMJ13APT 12.4 13 13.7 1.0 11.1 5.0 33 18.2 0.081 P6SBMJ15APT 14.3 15 15.8 1.0 12.8 5.0 28 21.2 0.084 P6SBMJ16APT 15.2 16 16.8 1.0 13.6 5.0 27 22.5 0.086 P6SBMJ18APT 17.1 18 18.9 1.0 15.3 5.0 24 25.2 0.088 P6SBMJ20APT 19.0 20 21.0 1.0 17.1 5.0 22 27.7 0.090 P6SBMJ22APT 20.9 22 23.1 1.0 18.8 5.0 20 30.6 0.092 P6SBMJ24APT 22.8 24 25.2 1.0 20.5 5.0 18 33.2 0.094 P6SBMJ27APT 25.7 27 28.4 1.0 23.1 5.0 16 37.5 0.096 P6SBMJ30APT 28.5 30 31.5 1.0 25.6 5.0 14.4 41.4 0.097 P6SBMJ33APT 31.4 33 34.7 1.0 28.2 5.0 13.2 45.7 0.098 P6SBMJ36APT 34.2 36 37.8 1.0 30.8 5.0 12.0 49.9 0.099 P6SBMJ39APT 37.1 39 41.0 1.0 33.3 5.0 11.2 53.9 0.100 P6SBMJ43APT 40.9 43 45.2 1.0 36.8 5.0 10.1 59.3 0.101 P6SBMJ47APT 44.7 47 49.4 1.0 40.2 5.0 9.3 64.8 0.101 P6SBMJ51APT 48.5 51 53.6 1.0 43.6 5.0 8.6 70.1 0.102 P6SBMJ56APT 53.2 56 58.8 1.0 47.8 5.0 7.8 77.0 0.103 P6SBMJ62APT 58.9 62 65.1 1.0 53.0 5.0 7.1 85.0 0.104 P6SBMJ68APT 64.6 68 71.4 1.0 58.0 5.0 6.5 92.0 0.104 P6SBMJ75APT 71.3 75 78.8 1.0 64.1 5.0 5.8 103 0.105 P6SBMJ82APT 77.9 82 86.1 1.0 70.1 5.0 5.3 113 0.105 P6SBMJ91APT 86.5 91 95.5 1.0 77.8 5.0 4.8 125 0.106 P6SBMJ100APT 95.0 100 105 1.0 85.5 5.0 4.4 137 0.106 P6SBMJ110APT 105 110 116 1.0 94.0 5.0 4.0 152 0.107 P6SBMJ120APT 114 120 126 1.0 102 5.0 3.6 165 0.107 P6SBMJ130APT 124 130 137 1.0 111 5.0 3.3 179 0.107 P6SBMJ150APT 143 150 158 1.0 128 5.0 2.9 207 0.108 P6SBMJ160APT 152 160 168 1.0 136 5.0 2.7 219 0.108 P6SBMJ170APT 162 170 179 1.0 145 5.0 2.6 234 0.108 P6SBMJ180APT 171 180 189 1.0 154 5.0 2.4 246 0.108 P6SBMJ200APT 190 200 210 1.0 171 5.0 2.2 274 0.108 RATING CHARACTERISTIC CURVES ( P6SBMJ6.8APT ~ P6SBMJ200APT ) FIG. 1 - PEAK PULSE POWER RATING CURVE PEAK PULSE POWER (P PP ) OR CURRENT (I PP ) DERATING IN PERCENTAGE,% FIG. 2 - PULSE DERATING CURVE P PPM , PEAK PULSE POWER, KW 100 Non-Repetitive Pulse Waveform Shown in Fig.3 T A = 25 OC 10 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS 100 75 50 25 0 0 10mS 75 50 100 125 150 175 200 T A , AMBIENT TEMPERATURE,( OC ) T P , PULSE WIDTH, Sec FIG. 4 - TYPICAL JUNCTION CAPACITANCE UNI-DIRECTIONAL FIG. 3 - PULSE WAVEFORM 150 6,000 Peak Value I PPM f = 1.0 MHz Vsig = 50mVp-p T J = 25 OC Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of I PPM C J , CAPACITANCE, pF tr = 10usec. I PPM , PEAK PULSE CURRENT,% 25 100 I PPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 50 td 0 0 1,000 2.0 t, TIME,mS 3.0 4.0 Measured at Stand off Voltage,V WM 100 10 1.0 Measured at Zero Bias 1.0 10 100 V( BR ), BREAKDOWN VOLTAGE, VOLTS 200 RATING CHARACTERISTIC CURVES ( P6SMAJ6.8APT ~ P6SMAJ200APT ) FIG. 5 - STEADY STATE POWER DERATING CURVE FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNI-DIRECTIONAL 200 I FSM , PEAK FORWARD SURGE CURRENT AMPERES 60Hz Resistive or Inductive Load 3.75 2.50 1.25 0 0 25 50 75 100 125 150 175 8.3ms Single Half Sine-Wave (JEDED Method) 100 10 1 200 10 T L , LEAD TEMPERATURE ( OC ) NUMBER OF CYCLES AT 60 Hz FIG. 7 -TYPICAL REVERSE LEAKAGE CHARACTERISTICS 1000 I R , INSTANTANEOUS REVERSE LEAKAGE CHRRENT, MICROAMPERES P M ( AV ), STEADY STATE POWER DISSIATION, WATTS 5.00 100 10 1 0.1 0.01 .001 0 100 200 300 400 V( BR ) BREAKDOWN VOLTAGE, VOLTS 500 100