S06P20PT CHENMKO ENTERPRISE CO.,LTD THRU SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 - 40 Volts S06P40PT CURRENT 6 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Metal Silicon junction, majority carrier conduction * Low power loss,high efficiency * High current capability, low forward voltage drop * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering in accordance with CECC 802 / Reflow guaranteed .181 (4.60) .263 (6.70) .248 (6.30) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS PIN 1 Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. PIN 2 .027 (0.70) .019 (0.50) .035 (0.90) .023 (0.60) .059 (1.50) .035 (0.90) .244 (5.70) .208 (5.30) Case: JEDEC DPAK molded plastic Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Weight: 1.7 grams ( Approximately ) .094 (2.40) .086 (2.20) .022 (0.55) .017 (0.45) .394 (10.00) .354 (9.00) MECHANICAL DATA .113 (2.80) .087 (2.20) .059 (1.50) .051 (1.30) DPAK .015 (0.381) K - HEATSINK DPAK Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL S06P20PT S06P30PT S06P40PT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 Volts Maximum RMS Voltage VRMS 14 21 28 Volts Maximum DC Blocking Voltage VDC 20 30 40 Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 6.0 Amps IFSM 150 Amps R Typical thermal resistance per leg ( NOTE 1 ) Operating and Storage Temperature Range Volts IO o 5.0 JC TJ, TSTG C/W o -40 to +125 C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 3.0 A DC Maximum instantaneous reverse current at VF TC = 25oC S06P20PT S06P30PT S06P40PT UNITS 0.55 Volts 1.0 mAmps 50 mAmps IR rated DC blocking voltage per leg ( NOTE 2 ) o TC = 100 C NOTES : 1. Thermal resistance from junction to case per leg 2. Pulse test : 300 us pulse width, 1% duty cycle 2002-5 RATING CHARACTERISTIC CURVES ( S06P20PT THRU S06P40PT ) 8 6 4 Single Half Wave 60HZ Resistive or Inductive Load 2 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 10 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 150 8.3 ms Single Half Sine-Wave (JEDEC Method) 125 100 75 50 25 0 0 2 4 CASE TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) 10 TJ = 25oC 0.1 PULSE WIDTH=300uS 1% DUTY CYCLE .01 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 20 INSTANTANEOUS FORWARD VOLTAGE, (V) 40 FIG. 5 - TYPICAL JUNCTION CAPACITANCE TJ =25oC 100 10 5 .1 .4 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 1000 JUNCTION CAPACITANCE, ( pF ) INSTANTANEOUS FORWARD CURRENT, (A) 20 10 20 1.0 6 8 10 NUMBER OF CYCLES AT 60HZ 1.0 4 10 REVERSE VOLTAGE, ( V ) 40 80