W005MPT CHENMKO ENTERPRISE CO.,LTD THRU SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.5 Amperes W10MPT FEATURES * High reverse voltage to 1000V * Surge overload rating - 50 Amperes peak * Good for printed circuit board assembly WOM .360(9.1) .340(8.6) .217(5.5) .197(5.0) MECHANICAL DATA 1.0 1.2 Case: JEDEC WOM molded plastic Mounting position: Any Polarity: Polarity symbols marked on body Weight: 1.20 grams (25.4) MIN. (30.5) MIN. .032(0.8) .028(0.7) .220(5.6) .180(4.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. .220(5.6) .180(4.6) WOM Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL W005MPT W01MPT W02MPT W04MPT W06MPT W08MPT W10MPT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts o Maximum Average Forward Rectified Current at TA = 25 C IO 1.5 Amps IFSM 50 Amps TJ -55 to +125 o C TSTG -55 to +150 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0 A DC Maximum Reverse Current at rated SYMBOL W005MPT W01MPT W02MPT W04MPT W06MPT W08MPT W10MPT UNITS VF 1.0 Volts 10 uAmps 0.2 mAmps @ TA = 25oC IR DC blocking Voltage per element @ TA = 100oC 2004-6 RATING CHARACTERISTIC CURVES ( W005MPT THRU W10MPT ) 2.0 1.5 1.0 Single Half Wave 60HZ Resistive or Inductive Load 0.5 0 0 20 40 60 80 100 120 140 160 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 2.5 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 60 8.3 ms Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 0 0 2 AMBIENT TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 6 8 10 10 20 10 TJ = 25oC 1.0 4 NUMBER OF CYCLES AT 60HZ 0.1 PULSE WIDTH=300uS 1% DUTY CYCLE .01 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.6 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)