DB101PT CHENMKO ENTERPRISE CO.,LTD THRU SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere DB107PT FEATURES * * * * * Good for automatic insertion Surge overload rating - 50 Amperes peak Glass passivated device Ideal for printed circuit board Reliable low cost construction utilizing molded DB-1 .255 (6.5) .245 (6.2) MECHANICAL DATA .350 (8.9) .300 (7.6) Case: JEDEC DB-1 molded plastic Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting position: Any Polarity: Polarity symbols marked on body Weight: 1.0 gram .365 (9.3) .355 (9.0) .135 (3.4) .115 (2.9) .165 (4.2) .155 (3.9) .020 (0.5) .060 .205 (5.2) .195 (5.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. (1.5) DB-1 Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL DB101PT DB102PT DB103PT DB104PT DB105PT DB106PT DB107PT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TA = 40oC IO 1.0 Amps IFSM 50 Amps TJ, TSTG -65 to +150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range o C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0 A DC Maximum Reverse Current at rated SYMBOL DB101PT DB102PT DB103PT DB104PT DB105PT DB106PT DB107PT UNITS VF 1.1 Volts 10 uAmps 0.5 mAmps @ TA = 25oC IR DC blocking Voltage per element @ TA = 125oC 2001-6 RATING CHARACTERISTIC CURVES ( DB101PT THRU DB107PT ) 1.00 0.75 0.50 Single Half Wave 60HZ Resistive or Inductive Load 0.25 0 0 20 40 60 80 100 120 140 160 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.25 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 60 8.3 ms Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 0 0 2 AMBIENT TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 6 8 10 10 20 10 TJ = 25oC 1.0 4 NUMBER OF CYCLES AT 60HZ 0.1 PULSE WIDTH=300uS 1% DUTY CYCLE .01 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.6 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)