CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. PRODUCT SPECIFICATION :CSLO-U34SHR1-QA0R Model No Descriptions: ■LED Type :Superbright Lamp ■LED Package :Oval LED Lamp ■Emitting Color:Red ■Viewing Angle:110°/40° ■Stopper CUSTOMER APPROVED SIGNATURES APPROVED BY CHECKED BY PREPARED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:886-2-2223-9696 Fax:886-2-2223-9377 Tel:86-0575-88623888 Fax:86-0575-88623112 http://www.csctw.com.tw CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. :CSLO-U34SHR1-QA0R Model No ■ Features - 1. Low Power Consumption. 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Rohs Compliant ■ Device Selection Guide Chip LED Lens Part No. CSLO-U34SHR1-QA0R Material Emitted Color AlInGaP Red Red Diffused ■ Package Outline Dimensions - *Tolerance:± 0.01 0.25 : Unit ± inch mm http://www.csctw.com.tw : Page 1/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. :CSLO-U34SHR1-QA0R Model No ■ Absolute Maximum Rating - ℃ (Ta=25 ) Parameter Symbol Rating Unit Pd 120 mW Forward Current (DC) IF 50 mA Peak Forward Current * IFP 100 mA Reverse Voltage VR 5 V Operating Temp. Topr -30 ~ +85 Storage Temp. Tstg -40 ~ +100 Lead Soldering Temperature Tsol Power Dissipation * Pulse width ℃ ℃ ℃ Max. 260 for 5 sec Max. (3mm from the epoxy bulb) ≦0.1 msec. duty ≦1/10 ■ Electro-optical Characteristics - ℃ (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Forward Voltage VF ----- 2.1 2.4 V Luminous Intensity IV 680 800 1900 mcd Dominant Wavelength λd 615 525 635 nm Peak Wavelength λp ----- 635 ----- nm ∆λ1/2 ----- 15 ----- nm θ 1/2 ----- 110(X) ----- ----- 40(Y) ----- IR ----- ----- 50 Spectral Half Width Viewing Angle Reverse Current Condition IF=20mA deg 2 http://www.csctw.com.tw μA VR=5V : Page 2/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. :CSLO-U34SHR1-QA0R Model No ■ Luminous Intensity Rank Limits ( I F = 20mA ) : unit mcd Part No. CSLO-U34SHR1-QA0R Code min. 680 880 1150 1500 N P Q R ■ Color Rank Limits ( I F max. 880 1150 1500 1900 = 20mA ) : unit nm Part No. CSLO-U34SHR1-QA0R Code min. max. 1 615 620 2 620 625 3 625 630 4 630 635 Notes: 1. Tolerance of measurement of luminous intensity :±15 2. Tolerance of measurement of Color Coordinates :±0.01 3. Tolerance of measurement of forward voltage :±0.05v 4. All data are measured by CSC's test equipment. 5. One delivery will include several color rank, VF rank and Iv ranks of the products. 6. The quantity-ratio of the ranks is decided by CSC. 7. Please confirm with CSC salesman,if your request different form standard specification. % http://www.csctw.com.tw : Page 3/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. :CSLO-U34SHR1-QA0R Model No ■ Typical Electrical / Optical Charateristics Curves ℃ Unless Otherwise Noted) (Ta = 25 Forward Current vs.Forward Voltage Relative Intensity vs.Forward Current Relative Intensity (Normalized at 20mA) IF - Forward Current - mA 50 TA=25°C 40 30 20 10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 VF - Forward Voltage - V TA=25°C 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 DC Forward Current - mA Relative Intensity vs.Wavelength 60 1.2 50 1.0 Relative Intensity IF - Forward Current - mA Forward Current vs.Ambient Temperature 2.5 40 30 20 TA=25°C IF=20mA 0.8 0.6 0.4 0.2 10 0 450 500 550 600 650 700 750 0 0 20 40 60 80 100 TA - Ambient Temperature -°C Wavelength - nm 0° 100% 10° H-H 20° V-V 30° 40° 50° 60° 50% 70° 80° 90° 0% 90° Fig 6. 60° 30° 0% 50% 100% Relative Luminous Intensity vs.Radiation Angle http://www.csctw.com.tw : Page 4/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. :CSLO-U34SHR1-QA0R Model No http://www.csctw.com.tw : Page 5/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-U34SHR4-QA0R A Rev. :CSLO-U34SHR1-QA0R Model No ■ Precautions For Use - 1. Recommended Soldering conditions Wave Soldering 260(max.) Temperature(°C) 250 240 Preheat 105(max.) 0 5 sec. Max. 60sec. Time(sec.) 2. Soldering Iron Basic SPEC. is ≦5sec. When 260℃. If temperature is higher, time should ℃→ -1sec.). Power dissipation of iron should be smaller than 15W be shorter (+10 , and temperature should be controllable. Surface temperature of the device should ℃ be under 230 . 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs. Note: The specifications are subject to change without notice. Please contact us for updated information. http://www.csctw.com.tw : Page 6/6