CHINA SEMICONDUCTOR CORPORATION Spec. No. Rev. PS-ND-0710 A PRODUCT SPECIFICATION Model No CSS-4018SG/4019SG Descriptions: 4.0 Inch Single Digit Display Emitting Color Super Bright Red & Yellow Green CUSTOMER APPROVED SIGNATURES APPROVED BY CHECKED BY PREPARED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:886-2-2223-9696 Fax:886-2-2223-9377 Tel:86-0575-8623888 Fax:86-0575-8623112 http://www.csctw.com.tw CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-0710 A CSS-4018SG/4019SG Features 1. 4.0 inch (101.6mm) digit height. 2. Case mold type. 3. RoHS compliant. 4. Low power consumption. 5. Easy mounting on P.C. board or socket. Device Selection Guide - Part No. CSS-4018SG CSS-4019SG Chip Material Emitted Color GaAsP Super Bright Red GaP Yellow Green GaAsP Super Bright Red GaP Yellow Green Description Common Anode Common Cathode Mechanical Dimensions - http://www.csctw.com.tw Page 1/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. PS-ND-0710 Rev. A CSS-4018SG/4019SG Internal Circuit Diagrams - " a " for Red color chip, " b " for Green color chip. CSS-4018 Common Anode ( CSS-4019 Common Cathode) http://www.csctw.com.tw Page 2/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-0710 A CSS-4018SG/4019SG Absolute Maximum Rating (Ta=25 Parameter Symbol Power Dissipation Per Dice Pd Continuous Forward Current Per Dice IAF Peak Current Per Dice IPF ) Super-Bright Red 75 30 200 Unit mW mA mA VR 5 V Operating Temperature Topr -35 ~ +85 Storage Temperature Tstg -35 ~ +85 Reverse Voltage Per Dice Solder emperature 1/16 inch below seating plane for 3 seconds at 260 Electro-optical Characteristics (Ta=25 Parameter Unit Condition V IF=20mA - mcd IF=10mA 635 - nm IF=20mA - 35 - nm IF=20mA IR - - 100 A VR=25V IV-m - - 2:1 Symbol Min. Forward Voltage Per Segment VF - Luminous Intensity Per Segment Iv - 35 - Peak Emission Wavelength Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio ) P Typ. Max. 9.0(1.8) 12.5(2.5) http://www.csctw.com.tw . IF=10mA Page 3/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. PS-ND-0710 Rev. A CSS-4018SG/4019SG Absolute Maximum Rating (Ta=25 Parameter ) Symbol Yellow-Green Unit Power Dissipation Per Dice Pd 70 mW Continuous Forward Current Per Dice IAF 25 mA Peak Current Per Dice IPF 90 mA Reverse Voltage Per Dice VR 5 V Operating Temperature Topr -35 ~ +85 Storage Temperature Tstg -35 ~ +85 Solder emperature 1/16 inch below seating plane for 3 seconds at 260 Electro-optical Characteristics (Ta=25 Parameter Forward Voltage Per Segment Luminous Intensity Per Segment Peak Emission Wavelength Spectrum Radiation Bandwidth Reverse Current Luminous Intensity Matching Ratio ) Unit Condition V IF=20mA - mcd IF=10mA 570 - nm IF=20mA - 30 - nm IF=20mA IR - - 100 A VR=25V IV-m - - 2:1 Symbol Min. VF - Iv - 30 - P Typ. Max. 10.5(2.1) 14.0(2.8) http://www.csctw.com.tw . IF=10mA Page 4/7 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-0710 A CSS-4018SG/4019SG Typical Electrical / Optical Charateristics Curves -Orange (Ta = 25 Unless Otherwise Noted) http://www.csctw.com.tw Page 5/6 CHINA SEMICONDUCTOR CORPORATION Model No Spec. No. Rev. PS-ND-0710 A CSS-4018SG/4019SG Typical Electrical / Optical Charateristics Curves -Yellow-Green (Ta = 25 Unless Otherwise Noted) http://www.csctw.com.tw Page 6/6