CLARE CPC1317P

CPC1317
OptoMOS®
Single-Pole
Relay With
Bidirectional Transient Protection
Parameter
Blocking Voltage
Load Current
Max On-Resistance
LED Current to Operate
Rating
70
150
16
1
Units
VP
mA
Ω
mA
Transient Protection Characteristics
Peak Pulse Power
600W
VWM
40.2V
Features
• 100% Solid State
• Low Drive Power Requirements
(TTL/CMOS Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750Vrms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
•
•
•
•
•
•
•
•
•
Security
Sensor Circuitry
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Aerospace
Industrial Controls
Description
The CPC1317 is a single-pole normally open
(1-Form-A) solid state relay with bi-directional
transient voltage suppressor (TVS) relay protection,
which is designed to meet the requirements of
EN50130-4 (installation class 3).
The relay output is constructed with efficient
MOSFET switches and photovoltaic die that use
Clare's patented OptoMOS architecture. The input,
a highly efficient GaAlAS infrared LED, controls the
optically coupled output.
The CPC1317 is available in an 8-pin, space-saving
surface-mount package.
Approvals
• UL Recognized Component: File # E76270
• EN/IEC 60950 Compliant
• CSA Certified Component: Certificate # 1172007
Ordering Information
Part #
CPC1317P
CPC1317PTR
Description
8-Pin Flatpack (50/tube)
8-Pin Flatpack (1000/reel)
Pin Configuration
+ Control
– Control
1
8
2
7
3
6
4
5
TVS +/TVS -/+
Load
Load
Switching Characteristics of
Normally Open (Form A) Devices
Control
ILOAD
+
90%
10%+
tOFF
tON
Pb
RoHS
2002/95/EC
DS-CPC1317-R03
e3
www.clare.com
1
CPC1317
Absolute Maximum Ratings
Parameter
SSR Output Blocking Voltage
TVS Working Voltage, Maximum
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
SSR Output Power Dissipation 2
TVS Peak Pulse Power
(IPP=9.3A, 10/1000μs pulse)
Isolation Voltage Input to Output
Operating Temperature
Storage Temperature
1
Derate Linearly 1.33 mw / ºC
2
Derate Linearly 6.67 mw / ºC
Ratings
70
40.2
5
50
1
150
400
600
Units
VP
V
V
mA
A
mW
mW
W
3750
-40 to +85
-40 to +125
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical absolute maximum ratings are at 25°C
SSR Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current
Continuous
Peak
On-Resistance 1
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current 2
Input Dropout Current
Input Voltage Drop
Common Characteristics @ 25°C
Capacitance Input to Output
1
2
Conditions
Symbol
Min
Typ
Max
t=10ms
IL=150mA, IF=1mA
VL=70V
IL
ILPK
RON
ILEAK
-
7
-
150
400
16
1
50V; f=1MHz
TON
TOFF
COUT
-
25
2.5
2.5
-
IL=150mA
IF=5mA
IF
IF
VF
0.1
0.9
1.2
1
1.4
mA
mA
V
-
CI/O
-
3
-
pF
Min
44.4
-
Typ
-
Max
66.5
5
Units
V
V
μA
IF=5mA, VL=10V
Units
mA
Ω
µA
ms
pF
Measurement taken within 1 second of turn-on time.
For applications requiring high temperature operation (> 60oC) a minimum LED drive current of 3mA is required.
TVS Electrical Characteristics
Parameter
Clamping Voltage
Reverse Breakdown Voltage
Reverse Leakage Current
2
Conditions
IPP=9.3A
I=1mA
VWM=40.2V
Symbol
VC
VBR
IL
www.clare.com
R03
CPC1317
PERFORMANCE DATA*
CPC1317
Typical LED Forward Voltage Drop
(TA=25ºC, IF=5mA)
35
CPC1317
Typical IF for Switch Operation
(TA=25ºC, IL=100mA)
25
25
20
15
10
15
10
5
5
0
0
1.21
0.12
1.22
1.23
1.24
1.25
LED Forward Voltage Drop (V)
CPC1317
Typical Turn-Off Time
(TA=25ºC, IL=100mA, IF=5mA)
25
0.16
0.18
0.20
LED Current (mA)
10
5
0
0.22
75
35
10
5
Device Count (N)
15
80
85
90
95
Turn-On (μs)
100
105
CPC1317
Typical Blocking Voltage Distribution
(TA=25ºC)
15
10
5
25
20
15
10
5
0.35
0.40
0.45 0.50 0.55
Turn-Off (ms)
0.60
0
0
0.65
6.8
CPC1317
LED Forward Voltage vs. Temperature
6.9
7.0
7.1
7.2
On-Resistance (Ω)
84
7.4
7.3
CPC1317
Turn-On Time vs. Temperature
Turn-On Time (μs)
1.4
1.3
1.2
IF=5mA
IF=2mA
IF=1mA
1.1
1.0
-40
-20
20
40
60
Temperature (ºC)
80
400
300
200
IF=5mA
-20
0
20
40
60
Temperature (ºC)
80
480
800
600
400
200
0
5
10
15
LED Forward Current (mA)
20
IF=1mA
-20
0
20
40
60
Temperature (ºC)
80
100
0.35
475
470
465
460
0
400
CPC1317
LED Current to Operate vs. Temperature
(IL=100mA)
LED Current (mA)
1000
Turn-Off Time (μs)
485
500
200
-40
100
CPC1317
Typical Turn-Off Time
vs. LED Forward Current
CPC1317
Typical Turn-On Time
vs. LED Forward Current
1200
IF=5mA
600
300
0
-40
100
90
700
100
0
86
87
88
89
Blocking Voltage (VP)
800
IF=1mA
500
Turn-Off Time (μs)
IF=50mA
IF=20mA
IF=10mA
1.5
85
CPC1317
Turn-Off Time vs. Temperature
600
1.6
LED Forward Voltage (V)
0.14
15
30
20
0
Turn-On Time (μs)
20
CPC1317
o
Typical On-Resistance Distribution
(TA=25ºC, IL=100mA)
20
Device Count (N)
Device Count (N)
20
Device Count (N)
Device Count (N)
Device Count (N)
30
25
CPC1317
Typical Turn-On Time
(TA=25ºC, IL=100mA, IF=5mA)
0
5
10
15
LED Forward Current (mA)
20
0.30
0.25
0.20
0.15
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.clare.com
3
CPC1317
PERFORMANCE DATA*
CPC1317
On-Resistance vs. Temperature
(IL=50mA, IF=1mA)
94
Blocking Voltage (VP)
10
9
8
7
6
5
-40
0
20
40
60
Temperature (ºC)
80
100
90
88
86
145
140
135
130
125
0.20
120
-20
0
20
40
60
Temperature (ºC)
80
100
-40
CPC1317
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=1mA)
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
80
100
CPC1317
Energy Rating Curve
1000
0.15
8
6
4
2
800
Load Current (mA)
Load Current (A)
10
0.10
0.05
0.00
-0.05
-0.10
600
400
200
-0.15
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-0.20
-1.5
CPC1317
TVS Diode Breakdown Voltage
vs. Temperature
(Pins 7 & 8)
25
52
51
Leakage Current (nA)
TVS Breakdown Voltage (V)
150
84
-40
CPC1317
Leakage Current vs. Temperature
Measured Between Pins 5 & 6
(VL=70V)
12
Leakage Current (μA)
-20
CPC1317
Load Current vs. Temperature
(IF=1mA)
155
92
50
49
48
47
46
45
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-1.0
-0.5
0.0
0.5
Load Voltage (V)
1.0
CPC1317
TVS Diode Leakage vs. Temperature
(Pins 7 & 8)
(VL=40V)
1s
CPC1317
TVS Derating Curve
120
100
20
15
10
5
0
-40
0
10μs 100μs 1ms 10ms 100ms
Time
1.5
Peak Pulse Power (% PPP @ 25ºC)
On-Resistance (Ω)
11
Load Current (mA)
12
CPC1317
Blocking Voltage vs. Temperature
(Pins 5 & 6)
-20
0
20
40
60
Temperature (ºC)
80
100
80
60
40
20
0
-40
-20
0
20
40
60
Temperature (ºC)
PPP - Peak Pulse Current (% IPP)
CPC1317
TVS Pulse Waveform 10/1000 (μs)
110
100
90
80
70
60
50
40
30
20
10
0
1
10
100
104
1000
Time (μs)
105
106
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.clare.com
R03
MANUFACTURING INFORMATION
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
Pb
e3
RoHS
2002/95/EC
MECHANICAL DIMENSIONS
8 Pin Flatpack Package
2.159 TYP.
(0.085 TYP.)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.398 ± 0.127
(0.370 ± 0.005)
Recommended PCB Land Pattern
2.286 MAX.
(0.090 MAX.)
2.54
(0.10)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
0.203
(0.008)
8.077 ± 0.127
(0.318 ± 0.005)
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
9.652 ± 0.381
(0.380 ± 0.015)
2.159 TYP.
(0.085 TYP.)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
Tape and Reel Packaging for 8 Pin Flatpack Package
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
1
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
8
Bo = 10.30
(0.406)
Top Cover
Tape
K0 = 2.70
(0.106)
K1 = 2.00
(0.079)
Embossed Carrier
Embossment
P = 12.00
(0.472)
Ao = 10.30
(0.406)
User Direction of Feed
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
5
Specification: DS-CPC1317-R03
©Copyright 2009, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
3/9/09