CPC1009N 4-Pin SOP OptoMOS® Relay Parameter Load Voltage Load Current Max On-Resistance Output Leakage, Off-State Ratings 100 150 8 20 Description CPC1009N is a miniature low voltage, low on-resistance, low off-state leakage, 1-Form-A solid state relay in a 4-Pin SOP package. Units VP mA Ω nA The MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture to provide 1500 Vrms of input-to-output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. Features • Extremely Low Output Leakage • 1500Vrms Input/Output Isolation • Small 4-Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available The CPC1009N uses Clare’s state of the art double-molded vertical construction to produce one of the world’s smallest 4-pin relays, which offers board space savings of 20% over the competitor’s larger 4-pin SOP relay. Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950 Compliant Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security Systems • Aerospace • Industrial Controls Ordering Information Part # CPC1009N CPC1009NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control – Control 1 4 Load 3 2 Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC DS-CPC1009N-R03 e3 www.clare.com 1 CPC1009N Absolute Maximum Ratings (@ 25˚C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total PowerDissipation 1 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 100 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Conditions Output Characteristics @ 25°C (Unless otherwise noted) Load Current Continuous 1 Peak t = 10ms On-Resistance 2 IL=150mA Off-State Leakage Current VL=100VP , T=115ºC Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF=5mA, VL=10V Output Capacitance 50V, f=1MHz Input Characteristics @ 25°C Input Control Current IL=150mA Input Dropout Current Input Voltage Drop IF=5mA Reverse Input Current VR=5V Input/Output Characteristics @ 25°C Capacitance Input to Output 1 2 2 Symbol Min Typ Max Units IL ILPK RON ILEAK - 5 - 150 350 8 20 tON tOFF COUT - 25 2 0.5 - IF IF VF IR 0.3 0.9 - 0.87 0.86 1.2 - 2 1.4 10 mA mA V μA - - 1 - pF mA Ω nA ms pF Load current derates linearly from 150mA @ 25oC to120mA @85oC. Measurement taken within 1 second of on time. www.clare.com R03 CPC1009N PERFORMANCE DATA* Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) 35 35 20 15 10 15 10 0 0 1.19 1.21 1.23 1.25 4.80 5.00 5.20 5.40 Typical IF for Switch Operation (TA=25ºC, IL=100mA) Typical IF for Switch Dropout (TA=25ºC, IL=100mA) 25 5 0 20 15 10 5 0.85 0.90 0.95 LED Current (mA) 1.00 0.70 Load Current (mA) 15 10 5 0.75 0.80 0.85 0.90 0.95 1.6 180 1.4 170 160 150 140 IF=10mA 130 IF=5mA 120 Turn-On (ms) Blocking Voltage (VP) 120 119 118 117 116 115 20 40 60 Temperature (ºC) 0.35 0.40 0.45 Turn-On (ms) 80 100 0.50 0.55 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=100VP) 1.2 1.0 0.8 0.6 0.2 -40 0.27 121 0 0.30 0.4 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Typical Turn-On vs. Temperature (IL=100mA) Typical Turn-Off vs. Temperature (IL=100mA) IF=5mA IF=10mA -40 0 120 Turn-Off (ms) 0.26 122 -20 5 190 Typical Blocking Voltage vs. Temperature -40 10 0.25 100 0 0.23 0.24 0.25 Turn-Off (ms) 15 1.00 110 0.22 20 Typical Maximum Load Current vs. Temperature 20 124 Typical Turn-On Time (TA=25ºC, IL=150mA, IF=5mA) LED Current (mA) Typical Turn-Off Time (TA=25ºC, IL=150mA, IF=5mA) 0.21 112 115 118 121 Blocking Voltage (VP) 0 1.05 Leakage (nA) 25 0.80 109 25 0 0.75 10 106 Device Count (N) 10 15 5.60 On-Resistance (Ω) 15 20 0 4.60 LED Forward Voltage Drop (V) 20 25 5 4.40 Device Count (N) Device Count (N) 20 5 25 Device Count (N) 25 5 1.17 30 Device Count (N) 25 Typical Blocking Voltage Distribution (TA=25ºC) 35 30 Device Count (N) Device Count (N) 30 Typical On-Resistance Distribution (TA=25ºC, IL=150mA) -20 0 20 40 60 Temperature (ºC) 80 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 120 IF=10mA IF=5mA -40 -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1009N PERFORMANCE DATA* Typical Turn-On vs. LED Forward Current (TA=25ºC, IL=120mA) 1.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 120 0 5 10 0.4 0.3 0.2 20 25 30 35 40 45 0 15 20 25 30 35 40 45 50 3.0 2.5 2.5 2.0 1.5 1.0 0 20 40 60 Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) Energy Rating Curve (TA=25ºC) Load Current (A) 50 0 -50 -100 -0.5 0 0.5 Load Voltage (V) -20 0 1.0 1.5 20 40 60 80 100 Typical IF for Switch Dropout vs. Temperature (IL=100mA) 2.0 1.5 1.0 0 -20 Temperature (ºC) -1.0 -40 0.5 LED Forward Current (mA) -150 -1.5 4 3.0 -40 100 Instantaneous IF=5mA Temperature (ºC) 0 10 Steady State 6 0 50 0.5 0.1 Load Current (mA) 15 LED Current (mA) LED Current (mA) Turn-On (ms) 0.5 5 8 Typical IF for Switch Operation vs. Temperature (IL=100mA) Typical Turn-Off vs. LED Forward Current (TA=25ºC, IL=120mA) 0 IF=5mA IF=10mA 10 LED Forward Current (mA) 0.6 150 12 2 Temperature (ºC) 0.7 Typical On-Resistance vs. Temperature (IL=150mA) On-Resistance (Ω) 1.8 Turn-On (ms) LED Forward Voltage Drop (V) Typical LED Forward Voltage Drop vs. Temperature 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10μs 100μs 1ms 10ms 100ms Time 1s 80 100 -40 -20 0 20 40 60 80 100 Temperature (ºC) 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 CPC1009N Manufacturing Information Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb RoHS 2002/95/EC e3 Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC1009N-R03 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 12/11/08