CLARE XAA170S

XAA170
Dual Single Pole OptoMOS® Relay
Blocking Voltage
Load Current
Max RON
CPC1219YA
350
100
50
Description
Units
VP
mA
Ω
The dual 1-Form-A XAA170 solid state relay has
two independent, optically coupled, normally open
single-pole relays in a single 8-pin package. Clare's
patented OptoMOS architecture makes available the
optically coupled technology necessary to activate the
output's efficient MOSFET switches while providing
a 3750Vrms input-to-output isolation barrier. Control
of the isolated output is accomplished by means of a
highly effective GaAlAs infrared LED at the input.
Features
• Small 8 Pin Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750Vrms Input/Output Isolation
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
By incorporating two independent single-pole relays
into a single 8-pin package, the XAA170 saves board
space by providing a more compact design solution
than two discrete single-pole relays in a variety of
applications.
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• EN/IEC 60950-1 compliant
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket
Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
Description
XAA170
XAA170P
XAA170PTR
XAA170S
XAA170STR
8 Pin DIP (50/Tube)
8 Pin Flatpack (50/Tube)
8 Pin Flatpack T&R (1000/Reel)
8 Pin Surface Mount (50/Tube)
8 Pin Surface Mount T&R (1000/Reel)
Pin Configuration
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
ILOAD
+
90%
10%+
TON
DS-XAA170-R03
www.clare.com
TOFF
1
XAA170
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Ratings
350
5
50
1
150
800
Units
VP
V
mA
A
mW
mW
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
3750
-40 to +85
-40 to +125
Vrms
°C
°C
1
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 1.33 mw / ºC
Derate Linearly 6.67 mw / ºC
2
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current, Continuous
Peak Load Current
On-Resistance
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
Input Voltage Drop
Reverse Input Current
Common Characteristics @ 25°C
Capacitance Input to Output
2
Conditions
Symbol
Min
Typ
Max
Units
t=10ms
IL=100mA
VL=350V
IL
ILPK
RON
ILEAK
-
33
-
100
350
50
1
mA
mA
Ω
VL=50V, f=1MHz
TON
TOFF
COUT
-
25
5
5
-
ms
ms
pF
IL = 100mA
-
IF
-
0.4
0.7
5
-
mA
mA
IF = 5mA
VR = 5V
VF
IR
0.9
-
1.2
-
1.4
10
V
μA
-
-
-
3
-
pF
IF = 5mA, VL = 10V
www.clare.com
µA
R03
XAA170
PERFORMANCE DATA*
XAA170
Typical LED Forward Voltage Drop
(N=50, TA=25ºC, IF=5mA)
25
Device Count (N)
25
20
15
10
5
5
Device Count (N)
15
10
5
0.56 0.62 0.69 0.75
LED Current (mA)
XAA170
Typical IF for Switch Dropout
(N=50, TA=25ºC, IL=100mADC)
XAA170
Typical Turn-On Time
(N=50, TA=25ºC, IF=5mA, IL=100mADC)
25
15
10
5
15
10
5
0.50
0.56
0.62
0.69
0.75
0.17 0.19 0.22
Turn-Off (ms)
0.25
0.83 0.91 0.99
Turn-On (ms)
XAA170
Typical Load Current vs. Temperature
XAA170
Typical Leakage vs. Temperature
(Measured Across Pins 4 & 6)
0.67
160
0.016
140
0.014
120
0.012
100
80
IF=10mA
IF=5mA
IF=2mA
60
40
0
20
40
60
80
100
440
435
430
IF=5mA
1.20
1.00
IF=10mA
0.80
IF=20mA
0.60
0.40
425
0.20
0
0
20
40
60
Temperature (ºC)
80
100
-40
1.14
0.010
0.008
0.006
0
-40
120
-20
0
20
40
60
80
Temperature (OC)
100 120
Turn-Off (ms)
Turn-On (ms)
Blocking Voltage (VP)
-20
1.40
445
1.06
0.002
1.60
450
-20
0.75
0.004
XAA170
Typical Turn-On vs. Temperature
(IL=100mADC)
1.80
455
-40
5
-20
0
Temperature (ºC)
XAA170
Typical Blocking Voltage vs. Temperature
420
10
LED Current (mA)
0
-40
0.28
15
0.81
20
0
20
0
0.44
Load Current (mA)
20
0.14
5
424.0 429.3 434.5 439.7 444.9 450.1 455.4
Blocking Voltage (VP)
20
0.81
XAA170
Typical Turn-Off Time
(N=50, TA=25ºC, IF=5mA, IL=100mADC)
0.11
10
On-Resistance (Ω)
0
0
0.50
15
0
25
20
0.44
20
29.09 29.86 30.63 31.40 32.16 32.93 33.70
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
XAA170
Typical IF for Switch Operation
(N=50, TA=25ºC, IL=100mADC)
25
Device Count (N)
10
Device Count (N)
1.17
Device Count (N)
15
0
0
25
20
Leakage (μA)
Device Count (N)
30
XAA170
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
25
Device Count (N)
35
XAA170
Typical On-Resistance Distribution
(N=50, TA=25ºC, IL=100mADC)
20
40
60
Temperature (OC)
80
100
XAA170
Typical Turn-Off vs. Temperature
(IL=120mADC, IF=5mA)
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
-40
-20
0
20
40
60
80
100
120
Temperature (ºC)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.clare.com
3
XAA170
PERFORMANCE DATA*
XAA170
Typical LED Forward Voltage Drop
vs. Temperature
XAA170
Typical Turn-On vs. LED Forward Current
(IL=100mADC)
IF=50mA
IF=30mA
IF=20mA
IF=10mA
IF=5mA
1.2
1.0
0.8
-40
70
-20
0
20
40
60
80
Temperature (ºC)
100
120
0
XAA170
Typical On-Resistance vs. Temperature
(IL=100mADC, IF=5mA)
6.0
5
10
15
20
25
30
35
40
45
50
40
30
20
10
50
-40
0
20
40
60
80
Temperature (OC)
-4
-3
-2
-1
0
1
Load Voltage (V)
2
6.0
3.0
2.0
20
25
30
35
40
45
50
4.0
3.0
2.0
1.0
0
-20
0
20
40
60
80
100 120
Temperature ( C)
4
15
5.0
O
3
10
XAA170
Typical IF for Switch Dropout
vs. Temperature
(IL=100mADC)
4.0
-40
XAA170
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=5mA)
5
XAA170
Typical IF for Switch Operation
vs. Temperature
(IL=100mADC)
0
100 120
-40
-20
0
20
40
60
80
Temperature (OC)
100 120
XAA170
Energy Rating Curve
Load Current (A)
120
100
80
60
40
20
0
-20
-40
-60
-80
-100
-120
-20
0
LED Forward Current (mA)
1.0
0
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
LED Forward Current (mA)
5.0
LED Current (mA)
On-Resistance (Ω)
60
Load Current (mA)
Turn-Off (ms)
1.4
Turn-On (ms)
1.6
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
LED Current (mA)
LED Forward Voltage Drop (V)
1.8
XAA170
Typical Turn-Off vs. LED Forward Current
(IL=100mADC)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
Time
1s
10s
100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.clare.com
R03
XAA170
MANUFACTURING INFORMATION
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
MECHANICAL DIMENSIONS
8-Pin DIP Through-Hole Package
PC Board Pattern
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 TYP.
(0.360 TYP.)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
8-0.800 DIA.
(8-0.031 DIA.)
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
3.302
(0.130)
8.077 ± 0.127
(0.318 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.239 TYP.
(0.285)
7.620 ± 0.127
(0.300 ± 0.005)
4.064 Typ
(0.160 Typ)
Dimensions
mm
(inches)
0.889 ± 0.102
(0.035 ± 0.004)
Recommended PCB Land Pattern
8-Pin Surface Mount Package
4.445 ± 0.127
(0.175 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
3.302
(0.130)
9.525 ± 0.254
(0.375 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
8.077 ± 0.127
(0.318 ± 0.005)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.65
(0.0255)
0.254 ± 0.127
(0.010 ± 0.0005)
4.064 Typ
(0.160 Typ)
Dimensions
mm
(inches)
0.889 ± 0.102
(0.035 ± 0.004)
8 Pin Flatpack Package
2.159 TYP.
(0.085 TYP.)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.398 ± 0.127
(0.370 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
2.286 MAX.
(0.090 MAX.)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
0.203
(0.008)
8.077 ± 0.127
(0.318 ± 0.005)
Recommended PCB Land Pattern
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
9.652 ± 0.381
(0.380 ± 0.015)
2.159 TYP.
(0.085 TYP.)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
R03
www.clare.com
5
MECHANICAL DIMENSIONS
Tape and Reel Packaging for 8-Pin Surface Mount Package
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
1
8
Top Cover
Tape
K0 = 4.90
(0.193)
K1 = 4.20
(0.165)
Embossed Carrier
Embossment
P = 12.00
(0.472)
Ao = 10.30
(0.406)
Bo = 10.30
(0.406)
Dimensions
mm
(inches)
User Direction of Feed
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Tape and Reel Packaging for 8 Pin Flatpack Package
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
1
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
8
Bo = 10.30
(0.406)
Top Cover
Tape
K0 = 2.70
(0.106)
K1 = 2.00
(0.079)
Embossed Carrier
Embossment
P = 12.00
(0.472)
Ao = 10.30
(0.406)
User Direction of Feed
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-XAA170-R03
©Copyright 2007, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
11/9/07