CLARE XAA117STR

XAA117
Dual Single Pole OptoMOS® Relay
Parameter
Blocking Voltage
Load Current
Max RON
LED Current to Operate
Ratings
60
150
16
1
Units
VP
mA
Ω
mA
Features
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• 3750Vrms Input/Output Isolation
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
Description
Clare's XAA117 is a dual 1-Form-A Solid State
Relay that has two independently controlled, optically
coupled MOSFET switches.
The MOSFET switches and photovoltaic die use
Clare’s patented OptoMOS® architecture to provide
3750 Vrms of input-to-output isolation. The optically
coupled output is controlled by a highly efficient
GaAIAs infrared LED.
This dual single-pole OptoMOS relay provides a more
compact design solution than discrete single-pole
relays in a variety of applications, and saves board
space by incorporating both switches in a single 8-Pin
package.
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signaling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
XAA117
XAA117S
XAA117STR
XAA117P
XAA117PTR
Description
8-Pin DIP (50/Tube)
8-Pin Surface Mount (50/Tube)
8-Pin Surface Mount (1,000/Reel)
8-Pin Flat Pack (50/Tube)
8-Pin Flat Pack (1,000/Reel)
Pin Configuration
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
ILOAD
+
90%
10%+
TON
DS-XAA117-R01
www.clare.com
TOFF
1
XAA117
Absolute Maximum Ratings
Parameter
Ratings
Blocking Voltage
60
Reverse Input Voltage
5
Input Control Current
50
Peak (10ms)
1
150
Input Power Dissipation 1
Total Power Dissipation 2
800
Isolation Voltage, Input to Output
3750
Operational Temperature
-40 to +85
Storage Temperature
-40 to +125
1
2
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Derate Linearly 1.33 mw/˚C
Derate Linearly 6.67 mw/˚C
Electrical absolute maximum ratings are at 25°C
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current
Continuous 1
Peak
On-Resistance
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
Input Voltage Drop
Reverse Input Current
Common Characteristics @ 25°C
Input to Output Capacitance
1
2
Conditions
Symbol
Min
Typ
Max
t =10ms
IL=150mA
VL=60V
IL
ILPK
RON
ILEAK
-
7
-
150
400
16
1
50V; f=1MHz
TON
TOFF
COUT
-
0.1
0.5
25
5
5
-
IL=150mA
IF=5mA
VR=5V
IF
VF
IR
0.05
0.9
-
1.2
-
1
1.4
10
mA
mA
V
μA
-
CI/O
-
3
-
pF
IF=5mA, VL=10V
Units
mA
Ω
μA
ms
pF
If both poles operate, the load current must be derated so as not to exceed the package power dissipation value.
www.clare.com
R01
XAA117
PERFORMANCE DATA*
XAA117
Typical LED Forward Voltage Drop
(TA=25ºC, IF=5mA)
35
XAA117
o
Typical On-Resistance Distribution
(TA=25ºC, IL=100mA)
20
25
20
15
10
15
Device Count (N)
Device Count (N)
Device Count (N)
30
25
10
5
5
0
1.22
1.23
1.24
1.25
LED Forward Voltage Drop (V)
25
6.9
6.8
XAA117
Typical Turn-On Time
(TA=25ºC, IL=100mA, IF=5mA)
20
15
10
5
0
0
1.21
XAA117
Typical IF for Switch Operation
(TA=25ºC, IL=100mA)
7.0
7.1
7.2
On-Resistance (Ω)
0.05
7.4
7.3
XAA117
Typical Turn-Off Time
(TA=25ºC, IL=100mA, IF=5mA)
25
35
0.06
0.07 0.08 0.09 0.10
LED Current (mA)
0.11
XAA117
Typical Blocking Voltage Distribution
(TA=25ºC)
15
10
5
15
10
5
80
85
90
95
Turn-On (μs)
100
XAA117
Typical Load Current vs. Temperature
(IF=2mA)
160
150
130
120
110
Both Poles
100
0.45 0.50 0.55
Turn-Off (ms)
0.60
90
15
10
84
0.65
85
86
87
88
89
Blocking Voltage (VP)
90
XAA117
Typical Blocking Voltage
vs. Temperature
94
10
Leakage (nA)
140
0.40
XAA117
Typical Leakage vs. Temperature
Measured Across Pins 5-6 or 7-8
(IL=max rated)
12
Single Pole
20
0
0.35
105
Blocking Voltage (VP)
75
25
5
0
0
Load Current (mA)
20
Device Count (N)
Device Count (N)
Device Count (N)
30
20
8
6
4
2
92
90
88
86
80
0
-40
70
1.6
-20
0
20
40
60
Temperature (ºC)
80
100
-20
0
20
40
60
Temperature (ºC)
80
84
-40
100
1.5
1200
485
1000
480
IF=50mA
1.4
IF=20mA
1.3
1.2
1.1
1.0
-40
600
0
20
40
60
Temperature (ºC)
80
100
475
470
400
IF=10mA
IF=5mA
IF=2mA
IF=1mA
-20
TOFF (μs)
800
-20
XAA117
Typical Turn-Off vs. LED Forward Current
(IL=100mA)
XAA117
Typical Turn-On vs. LED Forward Current
(IL=100mA)
XAA117
Typical LED Forward Voltage Drop
vs. Temperature
TON (μs)
LED Forward Voltage Drop (V)
-40
465
200
460
0
0
20
40
60
Temperature (ºC)
80
100
0
5
10
15
LED Forward Current (mA)
20
0
5
10
15
LED Forward Current (mA)
20
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R01
www.clare.com
3
XAA117
PERFORMANCE DATA*
XAA117
Typical On-Resistance vs. Temperature
(IL=50mA, IF=1mA)
12
0.3
8
7
Turn-On (μs)
Current (mA)
0.1
0.0
-0.1
300
200
IF=5mA
-20
0
20
40
60
Temperature (ºC)
80
-0.3
-1.5
100
-1.0
-0.5
0.0
0.5
1.0
XAA117
Typical Turn-Off vs. Temperature
(IL=50mA)
0.18
XAA117
Typical IF to Operate vs. Temperature
(IL=100mA)
0.16
IF=1mA & IF=5mA
500
IF (mA)
600
0.14
0.12
400
0.10
300
-20
0
20
40
60
Temperature (ºC)
0
-40
1.5
Voltage (V)
700
200
-40
400
100
-0.2
80
100
0.08
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-20
0
20
40
60
Temperature (ºC)
80
100
XAA117
Energy Rating Curve
Load Current (A)
On-Resistence (Ω)
9
6
TOFF (μs)
500
0.2
10
800
600
XAA117
Typical Turn-On vs. Temperature
(IL=50mA)
IF=1mA
11
5
-40
XAA117
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=1mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
Time
1s
10s 100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.clare.com
R01
XAA117
MANUFACTURING INFORMATION
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
MECHANICAL DIMENSIONS
8-Pin DIP Through-Hole Package
PC Board Pattern
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 TYP.
(0.360 TYP.)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
8-0.800 DIA.
(8-0.031 DIA.)
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
3.302
(0.130)
8.077 ± 0.127
(0.318 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.239 TYP.
(0.285)
7.620 ± 0.127
(0.300 ± 0.005)
4.064 Typ
(0.160 Typ)
Dimensions
mm
(inches)
0.889 ± 0.102
(0.035 ± 0.004)
Recommended PCB Land Pattern
8-Pin Surface Mount Package
4.445 ± 0.127
(0.175 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
3.302
(0.130)
9.525 ± 0.254
(0.375 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
8.077 ± 0.127
(0.318 ± 0.005)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.65
(0.0255)
0.254 ± 0.127
(0.010 ± 0.0005)
4.064 Typ
(0.160 Typ)
Dimensions
mm
(inches)
0.889 ± 0.102
(0.035 ± 0.004)
8 Pin Flatpack Package
2.159 TYP.
(0.085 TYP.)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.398 ± 0.127
(0.370 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
2.286 MAX.
(0.090 MAX.)
2.54
(0.10)
0.635 ± 0.127
(0.025 ± 0.005)
0.203
(0.008)
8.077 ± 0.127
(0.318 ± 0.005)
Recommended PCB Land Pattern
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
9.652 ± 0.381
(0.380 ± 0.015)
2.159 TYP.
(0.085 TYP.)
Dimensions
mm
(inches)
0.457 ± 0.076
(0.018 ± 0.003)
R01
www.clare.com
5
MECHANICAL DIMENSIONS
Tape and Reel Packaging for 8-Pin Surface Mount Package
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
1
8
Top Cover
Tape
K0 = 4.90
(0.193)
K1 = 4.20
(0.165)
Embossed Carrier
Embossment
P = 12.00
(0.472)
Ao = 10.30
(0.406)
Bo = 10.30
(0.406)
Dimensions
mm
(inches)
User Direction of Feed
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Tape and Reel Packaging for 8 Pin Flatpack Package
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
1
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
8
Bo = 10.30
(0.406)
Top Cover
Tape
K0 = 2.70
(0.106)
K1 = 2.00
(0.079)
Embossed Carrier
Embossment
P = 12.00
(0.472)
Ao = 10.30
(0.406)
User Direction of Feed
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale,
Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for
a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications
intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare,
Inc. reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-XAA117-R01
©Copyright 2007, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
11/9/07