THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS 5.0V HCMOS TCXO 14 Pin DIP Crystal Oscillator CW 00820 HTF546AG 12.8MHZ ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage (Vcc) -0.5 - 7 UNITS °C NOTE Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER Frequency Range Frequency Tolerance Operating Temperature Range (Fo) MINIMUM NOMINAL MAXIMUM 12.8 100 -4.6 4.6 0 70 UNITS MHz ppm °C Supply Voltage (Vcc) 4.75 5.0 5.25 Supply Current (Icc) - 15 35 mA Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) Typical Phase Noise measurements @ 19.44 MHz - - 1 ps rms SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset Typical Phase Noise measurements @ 100 MHz - -80 -105 -125 -135 -150 - dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset - -60 -85 -105 -125 -145 - dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz PARAMETER LOAD Voltage (High) (Low) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% The Connor-Winfield HTF546AG is a 5.0V HCMOS, hermetically sealed, fixed frequency, Temperature Compensated Crystal Oscillator (TCXO). The HTF546AG is designed for use as a SONET/SDH Network Timing Source. 1 FEATURES 5.0V OPERATION TABLE 3.0 MINIMUM NOMINAL MAXIMUM 15 (Voh) 3.75 4.5 (Vol) 0.5 (High) DESCRIPTION NOTE Vdc HCMOS OUTPUT CHARACTERISTICS Current HTF546AG TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM -40 85 UNITS pF Vdc Vdc (Ioh) -8 - - mA (Ioh) 45 50 3 8 55 5 mA % nS NOTE LOW JITTER <1ps RMS OVERALL FREQUENCY TOLERANCE: ±4.6ppm TEMPERATURE RANGE: 0 to 70°C HERMETICALLY SEALED DIP PACKAGE RoHS COMPLIANT / LEAD FREE PACKAGE CHARACTERISTICS TABLE 4.0 Package Hermetically sealed, metal package. ORDERING INFORMATION Note: 1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 15 years aging. HTF546AG - 012.8M TCXO SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Tx222 PAGE 1 OF 2 REV: 00 DATE: 05/06/08 aCopyright 2008 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Typical Phase Noise Measurements HTF546AG-019.44M HTF546AG-100.0M Package Outline Pin Connections .310 MAX (7.87mm) Pin 1 7 8 14 Connection N/C Ground Output Vcc Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) Test Circuit Solder Profile Temperature 260°C 260°C 220°C 180°C 14 150°C 8 120°C 1 7 N/C 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Tx222 PAGE 2 OF 2 REV: 00 DATE: 05/06/08 aCopyright 2008 Connor-Winfield all rights reserved.