THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM PRODUCT D ATA SHEET CW 0701 MSD621 100.00M CRYSTAL CONTROLLED OSCILLATORS LEADLESS SURFACE MOUNT HCMOS CLOCK OSCILLATOR ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage TABLE 1.0 UNITS MINIMUM -55 NOMINAL - MAXIMUM 125 UNITS °C (Vcc) -0.5 - 7 Vdc MINIMUM 1.8 -50 -40 NOMINAL - MAXIMUM 115 50 85 UNITS MHz ppm °C OPERATING SPECIFICATIONS PARAMETER Frequency Range Total Frequency Tolerance Operating Temperature Range MSD621 NOTE DESCRIPTION The Connor-Winfield MSD621 is a hermetically sealed surface mount 5.0V Crystal Controlled Oscillator (XO) HCMOS/TTL Compatible. The MSD621 is designed for applications requiring low jitter and tight stability. TABLE 2.0 (Fo) NOTE 1 Supply Voltage (Vcc) 4.50 5.00 5.50 Vdc Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset (Icc) - -60 -90 -125 -135 -140 50 5 1 - mA ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS NOTE INPUT CHARACTERISTICS FEATURES TABLE 3.0 PARAMETER Tri-state Enable Voltage (Vih) >70%Vcc - - Vdc 2 Tri-state Disable Voltage (Vil) - - <30%Vcc Vdc 2 5.0V OPERATION LOW JITTER <1ps RMS HCMOS OUTPUT CHARACTERISTICS FREQUENCY TOLERANCE: ±50ppm TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% (Ioh) (Ioh) MINIMUM > 0.9(Vcc) - NOMINAL - MAXIMUM 50 < 0.1(Vcc) UNITS pF Vdc Vdc -16 45 - 50 1.5 16 55 3 mA mA % nS PACKAGE CHARACTERISTICS NOTE TEMPERATURE RANGE: -40 to 85°C TRI-STATE ENABLE / DISABLE FUNCTION TAPE AND REEL PACKAGING TABLE 5.0 Package Hermetically sealed, leadless ceramic package. ORDERING INFORMATION Note: 1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 20 years aging. 2) Oscillator output is enabled with no connection on pad 1 MSD621 CLOCK SERIES 100.00 MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: HC201 PAGE 1 OF 2 REV: 00 DATE: 11/19/03 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Pin 1 2 3 4 5 6 Connection Enable / Disable N/C Ground Output N/C Vcc Dimensional Tolerance: ±.005 (.127mm) 25pF E/D Specifications subject to change without notice. DATA SHEET #: HC201 PAGE 2 OF 2 REV: 00 DATE: 11/19/03 aCopyright 2001 Connor-Winfield all rights reserved.