CONNOR-WINFIELD JH54RG5

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
5.0V Surface Mount 8 Pin DIP
HCMOS Clock Oscillator
CW 0626
JH64RG5
34.368M
ABSOLUTE M AXIMUM RATING S
PARAMETER
Storage Temperature
Supply Voltage
UNITS
MINIMUM
-55
NOMINAL
-
MAXIMUM
125
UNITS
°C
(Vcc)
-0.5
-
7.0
Vdc
MODEL SPECIFICATIONS :
MODEL JH54RG5
NOTE
TABLE 2.0
PARAMETER
Frequency Range
(Fo)
MINIMUM
NOMINAL
MAXIMUM
UNITS
1.8432
-
70
MHz
-20
-
20
ppm
0
-
70
°C
Frequency Tolerance:
Operating Temperature Range
NOTE
1
MODEL JH64RG5
Frequency Range
JH54RG5
JH64RG5
TABLE 1.0
1.8432
-
70
MHz
Frequency Tolerance:
(Fo)
-20
-
20
ppm
Operating Temperature Range
-40
-
85
°C
MINIMUM
NOMINAL
MAXIMUM
UNITS
OPERATING SPECIFIC ATIONS
1
DESCRIPTION
Connor Winfield models
JH54RG5 and JH64RG5 are
5.0V HCMOS, surface mount,
fixed frequency Crystal
Oscillator (XO) designed for
use in all applications
requiring precision clocks over
the commercial or industrial
temperature ranges.
TABLE 3.0
PARAMETER
Supply Voltage
(Vdd)
4.5
5.0
5.5
Vdc
Supply Current
(Icc)
-
-
70
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
ps rms
Jitter (BW=12kHz to 20MHz)
-
-
1
ps rms
INPUT CHARACTERISTICS
NOTE
FEATURES
5.0V OPERATION
TABLE 4.0
Enable Voltage
(Vih)
2.2
-
-
Vdc
Disable Voltage
(Vil)
-
-
0.8
Vdc
Enable Time
-
-
100
ns
Disable Time
-
-
100
ns
MINIMUM
4.5
-
NOMINAL
-
MAXIMUM
50
0.5
UNITS
pF
Vdc
Vdc
-16
45
50
16
55
mA
mA
%
Rise / Fall Time 10% to 90%
-
-
7
ns
Start-Up Time
-
-
10
ms
HCMOS OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
(Voh)
(Vol)
Current
(High)
(Low)
Duty Cycle at 50% of Vcc
2
TABLE 5.0
(Ioh)
(Ioh)
PACKAG E CHARACTERISTICS
NOTE
FREQUENCY RANGE: 1.8432 to 70
MHz
OVERALL FREQUENCY TOLERANCE:
±20ppm
TEMPERATURE RANGE:
JH54RG5: 0 to 70°C
JH64RG5: -40 to 85°C
TRI-STATE ENABLE / DISABLE
FUNCTION
HERMETICALLY SEALED PACKAGE
RoHS 5/6 COMPLIANT
ORDERING INFORMATION
TABLE 6.0
Package
JH64RG5 - 34.368MHz
Hermetically sealed, welded metal package
PROCESS RECOMMENDATIONS
TABLE 7.0
Soldering Process
See solder profile page 2.
HCMOS
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Hc207
PAGE 1
OF
2
REV: 01
DATE:
07/27/06
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
Note:
1) Inclusive of calibration @ 25 °C, frequency vs. temperature stability, supply voltage
change, load change, shock and vibration, 10 years aging.
2) Oscillator output is enabled with no connection on pin 1.
Enable / Disable Function
Pin Connections
Pin
1
2
3
4
TABLE 8.0
Output
Enable
Disable (High Impedance)
Tri-State Enable / Disable Function (Pin 1)
High or Open
Low
Package Outline and Dimensions
TABLE 9.0
Connection
Enable /Disable
Ground
Output
Vcc
Solder Profile
Temperature
225°C
Ramp-Up Rate
3°C/second max.
from 150°C to 225°C.
225°C
tp
Ramp-Down Rate
6°C/second max.
183°C
150°C
100°C
25°C
0
Time
60-120s
Max.
10-30s
60-150s Max.
360 Sec. Max.
Output Waveform
Test Circuit
4
3
1
2
50pF
ENABLE/
DISABLE
Specifications subject to change without notice.
DATA SHEET #:
Hc207
PAGE
2
OF
2
REV: 01
DATE: 07/27/06
aCopyright 2001 Connor-Winfield all rights reserved.