THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CW 0634 MSD611 77.76M CRYSTAL CONTROLLED OSCILLATORS LEADLESS SURFACE MOUNT HCMOS CLOCK OSCILLATOR ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage TABLE 1.0 UNITS MINIMUM -55 NOMINAL - MAXIMUM 125 UNITS °C (Vcc) -0.5 - 7 Vdc MINIMUM 1.8 -25 -40 NOMINAL - MAXIMUM 80 25 85 UNITS MHz ppm °C OPERATING SPECIFICATIONS PARAMETER Frequency Range Total Frequency Tolerance Operating Temperature Range MSD611 NOTE DESCRIPTION TABLE 2.0 (Fo) NOTE 1 Supply Voltage (Vcc) 4.50 5.00 5.50 Vdc Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset (Icc) - -60 -90 -125 -135 -140 50 5 1 - mA ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS NOTE INPUT CHARACTERISTICS The Connor-Winfield MSD611 is a hermetically sealed surface mount 5.0V Crystal Controlled Oscillator (XO) HCMOS/TTL Compatible. The MSD611 is designed for applications requiring low jitter and tight frequency stability. TABLE 3.0 PARAMETER Tri-state Enable Voltage (Vih) >70%Vcc - - Vdc 2 Tri-state Disable Voltage (Vil) - - <30%Vcc Vdc 2 FEATURES 5.0V OPERATION LOW JITTER <1ps RMS HCMOS OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% MINIMUM > 0.9(Vcc) - NOMINAL - MAXIMUM 50 < 0.1(Vcc) UNITS pF Vdc Vdc -16 45 - - 16 55 3 mA mA % nS (Ioh) (Ioh) 50 1.5 FREQUENCY TOLERANCE: ±25ppm NOTE TEMPERATURE RANGE: -40 to 85°C TRI-STATE ENABLE / DISABLE FUNCTION TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed, leadless ceramic package. Note: 1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 20 years aging. 2) Oscillator output is enabled with no connection on pad 1 ORDERING INFORMATION MSD611 - 77.76 MHz CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: HC176 PAGE 1 OF 2 REV: 02 DATE: 09/12/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline CW 0634 MSD611 77.76M Suggested Pad Layout Dimensional Tolerance: ±.005 (.127mm) Output Waveform Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 120 S Max. Test Circuit Time 10 S 60 S Max. 360 Sec. Max. Pin Connections Pin 1 2 3 4 5 6 50pF Connection Enable / Disable N/C Ground Output N/C Vcc E/D Specifications subject to change without notice. DATA SHEET #: HC176 PAGE 2 OF 2 REV: 02 DATE: 09/12/06 aCopyright 2001 Connor-Winfield all rights reserved.