The 4CV100,00C/8351 is recommended for use as a Class C RF amplifier or oscillator, a Class AB, push-pull AF amplifier or modulator. The 4CV100,000/8351 is also useful as a plate and screen modulated Class C RF amplifier. Class of Operation Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight Maximum Ratings Type of Service Plate Voltage (Volts) Plate Current (Amps) 100,000 Watts 1,750 Watts 500 Watts 30 MHz 4.5 Thoriated Tungsten 10.0 Volts 300 Amps Grounded Cathode 440.0 pf 55.0 pf 2.3 pf Grounded Grid 175 pf 57 pf 0.4 pf Vapor and Forced Air Special Graduated SK-1500A ----17.24 in; 437.9 mm 10.07 in; 255.8 mm 68 lb; 30.9 kg T ypical Operation Plate Screen Voltage Voltage (Volts) (Volts) Plate Current (Amps) Drive Output Power Power (Watts) (kiloWatts) C RF amplifier 20,000 15.0 17,500 1,500 11.8 125 168.0 C RF amplifier plate modulated 17,500 15.0 16,000 750 12 1,260 138.5 C RF amplifier plate modulated 17,500 15.0 17,500 900 11.6 8,100 141.0 AB1 RF linear amplifier 20,000 15.0 18,000 1,500 10 --- 123.2 AB1 AF amplifier or modulator 20,000 15.0 18,000 1,500 20 --- 246.4 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | 4CV100,000C/ 8351 CPI | 4CW50,000J 4CV100,000C/8351