The 4CX15,000R is identical to the 4CX15,000A except that it has a mesh filament. The mesh filament is particularly well suited to FM service at 108 MHz due to reduced filament inductance. It is also recommended for VHF TV linear amplifier service to 225 MHz. Class of Operation Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight Maximum Ratings Type of Service Plate Voltage (Volts) Plate Current (Amps) 15,000 Watts 450 Watts 200 Watts 110 MHz 4.5 Thoriated Tungsten 6.3 Volts 160 Amps Grounded Cathode 160.5 pf 24.5 pf 1.5 pf Grounded Grid 67.0 pf 25.5 pf 0.2 pf Forced Air Special, Coaxial SK-300A SK-316 --9.38 in; 238.00 mm 7.58 in; 193.00 mm 12.8 lb; 5.80 kg T ypical Operation Plate Screen Voltage Voltage (Volts) (Volts) Plate Current (Amps) Drive Output Power Power (Watts) (kiloWatts) C RF amplifier 10,000 6.0 10,000 750 4.6 220 36.5 C Plate modulated RF amplifier 8,000 4.0 8,000 750 3.7 150 23.5 AB1 RF linear amplifier 10,000 6.0 10,000 1,500 4.3 --- 28.5 AB1 AF amplifier or modulator 10,000 6.0 10,000 1,500 8.5 --- 57.7 --- Television linear amplifier 6,500 5.0 6,000 700 3.3 1,350 16.5 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | 4CX15,000R CPI | 4CW50,000J 4CX15,000R