EF Series • High Thermal Efficiency • Complete Power Control Circuits In a Single Package AVAILABLE OPTIONS ELECTRICAL SPECIFICATIONS Description Symbol D E F G Maximum DC Output Current (Tc = 85°C) (Single Phase Rating) ID 50 A 75 A 100 A 125 A Maximum Voltage Drop @ Amps Peak VF 1.7V @ 50A 1.85V @ 75A 1.4V @ 100A 1.55V @ 125A Operating Junction Temperature Range TJ -40 - 125°C -40 - 125°C -40 - 125°C -40 - 125°C Critical Rate of Rise of On-State Current @ TJ=125°C di/dt 100A/µs 100A/µs 100A/µs 100A/µs Critical Rate of Rise of Off-State Voltage [V/µs] dv/dt 500V/µs 500V/µs 500V/µs 500V/µs VRRM 400 (120 VAC) 600 (240 VAC) 800 (280 VAC) Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) [A] ITSM 400 1200 (480 VAC) 1400 (530 VAC) 600 1500 1950 Maximum I²T for Fusing (t=8.3ms) [A²sec] I2T 670 1500 9340 15800 Repetitive Peak Reverse Voltage (AC Line Nominal) [Vpk] Minimum Required Gate Current to Trigger @ 25°C [mA] IGT 60 80 150 150 Minimum Required Gate Voltage to Trigger @ 25°C [V] VGT 2.5 3.0 3.0 3.0 PG(AV) 0.5 0.5 0.5 0.5 Maximum Peak Reverse Gate Voltage [V] VGM 5.0 5.0 5.0 5.0 Maximum Thermal Resistance, Junction to Ceramic Base per Chip RJC 0.8°C/W 0.7°C/W 0.36°C/W 0.3°C/W VISOL 2500 2500 2500 2500 Average Gate Power [W] Isolation Voltage [Vrms] GENERAL SPECIFICATIONS Description Weight (typical) MECHANICAL SPECIFICATIONS CIRCUIT DIAGRAMS 7.0 oz (198g) 7.0 oz (198g) 7.0 oz (198g) 7.0 oz (198g) TERMINAL ORIENTATION AGENCY APPROVALS Rev. 012309 ANNEX - ENVIROMENTAL INFORMATION