OPEN FRAME & ENCLOSED PBDD Series 5 2 - 1 3 2 W AT T S D C / D C S I N G L E Features • • • • • • High efficiency for mobile communication. Lifetime reliability. Easy installation, small foot print. Low cost. EMC compliant. Ideal for high vibration/impact services. Specifications STANDARDS AND APPROVALS INPUT Input voltage 15-38Vdc. OUTPUT EMC testing AS/NZS2064, EN50081-2. Compliance marking C-tick, CE mark. MECHANICALS Output voltage 13.2Vdc Voltage adjustment N/A Output current See table Output noise CISPR25, <50mV p-p at full load. No load current <15mA. Case material T6063 marine grade aluminium, anodised. Colour Blue. End caps and brackets Glass filled nylon 6. Electrical construction Surface mount technology. Electrical connection Recessed 6.3mm spade terminals. Insulated push on connectors supplied. Output & fault indications Green & red LEDs. Reverse input protection Yes. Installation Mounting bracket - supplied with screws Transients protection Yes. Dimensions Overcurrent protection Yes. 70x75x32mm (PBDD5026J). 80x75x32mm (PBDD5024M). 90x75x32mm (PBDD5027R). Overvoltage protection Yes. Weight with bracket Transient protection ISO7637-2 Electrostatic protection ISO10605/14982. >8kV contact and 15kV discharge 159g (PBDD5026J), 198g (PBDD5026JM). 198g (PBDD5024M), 237g (PBDD5024JM). 212g (PBDD5027R), 251g (PBDD5027M). Duty cycle Peak load is available for a maximum of 5 minutes in each 20 minutes. >90% ENVIRONMENTAL Operating temperature -25°C to 30°C. Above 30°C ambient, reduce continuous load by 2% per °C. Cooling Convection cooled. Humidity 90% non condensing. Environmental protection IP53 dust, water and impact resistance. Accessory Output (13.2V,100mA) VNOM INOM PBDD-5026J 13.2V 4.0A 7A YES-PBDD-5026JM PBDD-5024M PBDD-5027R 13.2V 13.2V 7.0A 10.0A 10A 14A YES-PBDD-5024MM YES-PBDD-5027RM OPERATING Efficiency OUTPUT MODEL NUMBER Your dependable power partner – www.powerbox.com.au IPEAK 103