DC/DC Converters CTDD2010S-D Series Fixed Input Isolated & Unregulated 1W Output, Dual Output Not shown at actual size. ctparts.com SPECIFICATIONS Part Number Vin Nom. CTDD2010S-0505D-1 CTDD2010S-0509D-1 CTDD2010S-0512D-1 CTDD2010S-0515D-1 5VDC 5VDC 5VDC 5VDC 4.5-5.5VDC 4.5-5.5VDC 4.5-5.5VDC 4.5-5.5VDC CTDD2010S-1205D-1 CTDD2010S-1209D-1 CTDD2010S-1212D-1 CTDD2010S-1215D-1 12VDC 12VDC 12VDC 12VDC 10.8-13.2VDC 10.8-13.2VDC 10.8-13.2VDC 10.8-13.2VDC Input Range Vout Iout Max. (mA) Iout Min. (mA) Effi(Typ.) ±5VDC ±9VDC ±12VDC ±15VDC ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 72% 72% 75% 75% ±5VDC ±9VDC ±12VDC ±15VDC ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 75% 76% 78% 78% MAX Units ISOLATION SPECIFICATIONS Item Test Condition MIN Isolation Voltage Tested for 1 minute 6000 TYP VDC Isolation Resistance Test at 500VDC 1000 MΩ OUTPUT SPECIFICATIONS Item Test Condition MIN 1W Output Power FEATURES Efficiency: To 78% Temperature Range: -40°C to 85°C Isolation: 6kVDC Package: UL94-V0 Miscellaneous: No heatsink required. No external components required. Industry standard pinout. Output. Custom service available. Samples available. TYP MAX 0.1 Units 1 W ±1.2 %/% Line regulation For Vin change of 1% Load regulation 10% to 100% (5V output) 15 % Load regulation 10% to 100% (12V,24V,48V) 10 % Output voltage accuracy full load (see tolerance envelope graph) 0.03 %/°C 150 mVp-p Efficiency at full load Nominal input voltage Temperature drift full load 75 1W Output ripple 20MHz Bandwidth 75 Switching frequency Full load, nominal input 35 % KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. TYPICAL CHARACTERISTICS CHARACTERISTICS Temperature Derating Graph +10% +5% Nominal Voltage Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) CENTRAL Technologies 03.29.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) Tolerance Envelope Graph Output Voltage Short Circuit Protection: 1 second Temperature Rise at Full Load: 25°C Max. 15°C Typ. Cooling: Free air convection Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >1,000,000 hours 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 80 120 Ambient Temperature(°C) DC/DC Converters ctparts.com CTDD2010S-D Series Fixed Input Isolated & Unregulated 1W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2010S-D Package 19.50 12.50 Side View 4.10 2.54 2.40 1 2 9.80 5 6 7 Bottom View 15.24 2.00 CTDD2010S-D Footprint 2.54 ø1.00+0.15/-0 1 2 5 6 7 2.54 Note: All pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm. PIN CONNECTIONS Pin 1 2 5 6 7 Function Vin GND -Vo 0V +Vo 1 2 5 6 7 CENTRAL Technologies 03.29.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice