BAT165... Medium Power AF Schottky Diode • Forward current: 750 mA Reverse voltage: 40 V • For low-loss, fast-recovery, meter protection, bias isolation and clamping applications • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT165 ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type Package Configuration Marking BAT165 SOD323 single C/White Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Diode reverse voltage2) VR 40 V Forward current 2) IF 750 mA 500 mA 2.5 A Ptot 600 mW Junction temperature Tj 150 °C Storage temperature T stg Thermal Resistance Parameter Symbol Junction - soldering point 3) RthJS Average rectified forward current (50/60Hz, sinus) I FAV Non-repetitive peak surge forward current I FSM Value Unit (t ≤ 10ms) Total power dissipation TS ≤ 93°C -65 ... 150 Value Unit ≤ 95 K/W 1Pb-containing 2For package may be available upon special request TA > 25°C the derating of VR and IF has to be considered. Please refer to the atteched curves. 3For calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-04-19 BAT165... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Reverse current1) IR VR = 30 V - - 12 VR = 40 V - - 50 VR = 40 V, TA = 65 °C - - 900 Forward voltage Unit µA V VF IF = 10 mA 0.23 0.315 0.4 IF = 100 mA 0.32 0.39 0.47 IF = 250 mA 0.35 0.44 0.54 IF = 750 mA 0.44 0.58 0.74 - 8.4 12 AC Characteristics Diode capacitance CT pF VR = 10 V, f = 1 MHz 1Pulsed test: tp = 300 µs; D = 0.01 2 2007-04-19 BAT165... Diode capacitance CT = ƒ (VR) f = 1MHz Reverse current IR = ƒ (TA) VR = Parameter 10 -2 40 A pF 34 10 -3 IR CT 30 26 10 -4 22 10 -5 40 V 30 V 20 V 10 V 5V 18 14 10 -6 10 6 0 2 4 6 8 10 12 V 10 -7 20 15 40 60 80 100 VR 130 TA Reverse current IR = ƒ(VR) Forward current IF = ƒ (VF) TA = Parameter TA = Parameter 10 0 10 -2 A A 10 -3 10 -1 TA = 125°C TA= -40 °C = -20 = 0 = 25 = 45 = 65 = 85 10 -4 IF IR TA = 85°C 10 -2 10 -5 10 -3 10 -6 TA = 25°C 10 -4 10 -7 10 -8 0 °C 5 10 15 20 25 30 V 10 -5 0 40 VR 0.1 0.2 0.3 0.4 0.5 0.6 V 0.8 VF 3 2007-04-19 BAT165... Permissible Reverse voltage V R = ƒ (TA) tp = Parameter, Duty cycle < 0.01 Forward current IF = ƒ (T S) Device mounted on PCB with Rth = 160 k/W 50 1000 V DC 100ms 300µs mA 35 IF V Rmax 40 30 25 500 20 15 250 10 5 0 0 20 40 60 80 120 °C 100 0 0 150 15 30 45 60 75 90 105 120 °C TA 150 TS Permissible Puls Load R thJS = ƒ (tp) Permissible Pulse Load IFmax / I FDC = ƒ (t p) 10 2 IFmax/IFDC RthJS 10 2 10 1 D = 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 0 10 -1 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 s 10 10 0 -7 10 0 tp 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 4 2007-04-19 Package SOD323 BAT165... Package Outline 0.9 +0.2 -0.1 +0.2 1.25 -0.1 0 ±0.05 A 1.7 +0.2 -0.1 Cathode marking 0.45 ±0.15 2.5 ±0.2 2 1 0.3 +0.1 -0.05 +0.05 0.3 -0.2 0.15 +0.1 -0.06 0.25 M A 0.8 1.7 0.8 Foot Print 0.6 Marking Layout (Example) BAR63-03W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2 2.9 8 4 Cathode marking 0.65 1.35 5 1 2007-04-19 BAT165... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2007-04-19