SSF67V continuous output level transducer TM 4-20mA transducer for safe area use This transducer will give an output of 4-20mA over a measuring span of up to 2500mm. The output changes from 4 mA at low level to 20 mA at high level. The transducer is top mounting, via a screwed entry, has a brass or stainless steel shaft and either a stainless steel or foamed float, and is normally installed from outside the tank. Volt free reed switches and resistors are mounted in the stem, to provide a varying resistance, as the float rises or falls, which is then converted into a 4 to 20mA stepped output. Maximum process temperature 100°C Maximum span 2500mm Standard 10mm stepped accuracy Standard screw entry G1.0” to G2.5” Mechanical IP 65 enclosure in die cast Aluminium Alloy, hard anodised or polyester finish, with Nitrile O-ring and M20x1.5 conduit entry. Stem assembly in Brass or Stainless Steel, fully silver soldered or TIG welded construction Screwed entry mounting G1.0” to G2.5” Float can be constructed in either Stainless Steel 316L, High temperature plastic foam or D300 closed cell PVC Maximum Process Temperature 100°C Maximum Ambient Temperature 70°C Minimum high level 70mm Maximum measurement span 2500mm Standard 10mm stepped accuracy Electrical Output 4 to 20mA. 4 mA can be either High or Low Input supply required is 15 to 30 Vdc Can be connected to analogue or digital displays Standards and Approvals This design is tested to and meets the following standards: DEFSTAN 59-41 Iss.4 :1992 BS1597 : 1995 2&3 EN50081-1 :1992 EN50082-1 : 1992 USA Cynergy3 Components 2320 Paseo de las Americas, Suite 104 San Diego, CA 92154 Sales & Tech Support (866) 258-5057 Email: [email protected] EUROPE - UK Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Fax +44 (0) 1202 891918 Email:[email protected] Standard Parts Upper Level Measuring Span Screw Entry Float Material SSF67V70S500 70mm 500mm G1” D300 PVC Foam SSF67V70S1000 70mm 1000mm G1” D300 PVC Foam SSF67V70S1500 70mm 1500mm G1” D300 PVC Foam Mechanical Dimensions All dimensions are in millimeters (inches) 70mm 70mm (2.75”) (2.75”) 15mm (0.6”) 1mm (0.04”) Min High Level 70mm (2.75”) Max Span 2500mm (9.8”) VIEW A VIEW A M20 x 1.5 70mm (2.75”) MEDER 14mm (0.6”) G1.0" 20mm (0.8”) 30mm (1.2”) HEXAGON AF 47mm ISO 9001 C E R T I F I E D Competitive part number cross-reference available at: www.cynergy3.com © 2007 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Corp.