DeviceNet Mini-Style Connectors CM03 Series ◆ OUTLINE The CM03 series is the connector designed in accordance with DeviceNet Mini Style, an official standard of ODVA (Open DeviceNet Vendor Association, Inc.) for use in a DeviceNet communication network. The DeviceNet communication network provides connection among not only simple industrial devices such as sensor, actuator, electrical and electronic devices but also higher-level of devices such as control equipment. The CM03 series is IP67 rated for protection against moisture, oil and dust. It can be used in harsh environmental conditions. The connectors are provided with a premating contact which is a first make-last break contact to protect the circuit. When mated, the premating contact is connected first before the other contacts are disconnected last when dismated. Conforming Standard DeviceNet Wa t e r p r o o f IP 67 ◆ FEATURES ・ C-UL certified ・Protection from wiring errors by color-coding the contact holder with red, white, blue and black ・ Miswiring prevention : "Red, black, white and blue" are shown to a contact holder. No indication for drain wire. Lock Type Threaded Coupling [Applicable P/N : CM03-P5S, CM03-J5P] ◆ SPECIFICATIONS Jacket Rated Current 8A/Contact Rated Voltage 24V DC ＤＣ Power Insulation Color：Black Braid Shield AL / MY Shield Dielectric Withstanding Voltage 500V AC(r.m.s.) for 1 minute Data Insulation Color：White Insulation Resistance 1,000 ΜΩ Min. at 250V DC AL / MY Shield Operating Temperature Range - 40℃ to +85℃ Waterproof IP67 when mated No. of Contacts 4 and 5 Drain Wire Data Insulation Color：Blue ＤＣ Power Insulation Color：Red Applicable Cable ・Conductor size : AWG14 to AWG18 ・Outside Dia. : φ 7mm to φ 12mm RoHS Compliant ◆ MATERIAL/FINISH Compliant Receptacle Plug Receptacle (With Pin Contacts) (With Socket Contacts) Item Plug (With Socket Contacts) Jack (With Pin Contacts) Item Front Insulator Synthetic Rubber/Black Synthetic Rubber/Black Insulator Rear Insulator Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Gasket(Mating Side) Gasket Synthetic Rubber/Black Contact Copper Alloy/Gold Plating Coupling Ring Zinc Alloy/Nickel Plating Zinc Alloy/Nickel Plating Shell Zinc Alloy/Nickel Plating Zinc Alloy/Nickel Plating Contact Copper Alloy/Gold Plating Copper Alloy/Gold Plating Nut Copper Alloy/Nickel Plating Zinc Alloy/Nickel Plating Retainer Ring Copper Alloy/Nickel Plating Copper Alloy/Nickel Plating Gasket(Mounting Side) Synthetic Rubber/Black Synthetic Rubber/Black O-Ring Synthetic Rubber/Black Synthetic Rubber/Black Contact Holder Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Back Shell Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Cable Holder Plastic(UL94V-0)/White Plastic(UL94V-0)/White Bushing Synthetic Rubber/Black Synthetic Rubber/Black Clamp Nut Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black Copper Alloy/Gold Plating ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. 090213 http://www.ddknet.co.jp CM03 Series Unit：mm ○ Configuratin of Connectors for Crimp Contacts Plug ・4 pieces or 5 pieces of unassembled socket contacts to be supplied together with connectors ・Crimp termination type. (With Socket Contacts) １ ２ (4 positions for power) 7 8-16UN-2A φ26 ４ ３ φ26.4 φ25 φ14.2 P/N : CM03-P4S Applicable Outside Dia of Cable （φ7∼φ12） （75） 24 (Flat surfaces for spanner wrench) φ26.4 φ25 φ14.2 (5 positions for signal) Applicable Outside Dia of Cable （φ7∼φ12） P/N : CM03-P5S ５１ ４２ ３ 7 8-16UN-2A φ26 （75） 24 (Flat surfaces for spanner wrench) ・4 pieces or 5 pieces of unassembled socket contacts to be supplied together with connectors Jack (With Pin Contacts) ・Crimp termination type. ３ (4 positions for power) 7 8-16UN-2A 7 8-16UN-2A ３ Applicable Outside （φ7∼φ12） Dia of Cable ２４ 24 (Flat surfaces for spanner wrench) (78) φ26.4 φ25 φ14.3 １５ P/N : CM03-J5P φ26 ４ (5 positions for signal) φ26 １ ２ φ26.4 φ25 φ14.3 P/N : CM03-J4P Applicable Outside Dia of Cable （φ7∼φ12） (78) 24 (Flat surfaces for spanner wrench) ◆ CONFIGURATION OF CRIMP CONTACTS Pin Contacts Socket Contacts P/N : CM03-J-PC P/N : CM03-P-SC 28.5 26.45 ◆ CRIMP TOOL ・A crimp tool should is be needed for plugs and jacks. Item P/N A Set of Crimp Tool 3 5 7 J- 2 2 48 3 Hand Tool Contents 3 5 7 J- 1 2 6 1 0 Locator 3 5 7 J- 2 2 48 4 Inspection Gauge for AWG18 3 5 7 J- 2 2 2 7 6 - 1 Inspection Gauge for AWG14 3 5 7 J- 2 2 2 7 6 - 2 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CM03 Series Unit：mm ○ Receptacle With Pin Contacts Soldering Type P/N : CM03-R5P-S-CF 7 8 Filled with Epoxy Resin No.1 No.3 13/16-20UNEF-2A 7 4 1.5 4.8 8.7 28 No.3 11 24 Note: The position numbers are just for your reference and not shown on the connectors. 19.5 +0.1 0 0 0.8 φ2 No.4 No.2 No.2 No.4 No.5 φ20.6 9 No.1 φ27 No.5 -16UN-2A Mounting Hole ○ Plug Receptacle With Socket Contacts Soldering Type P/N : CM03-PR5S-S-CF No.1 Filled with Epoxy Resin No.4 No.2 No.3 13/16-20UNEF-2A 7.3 11.2 32 7.6 7 8 -16UN-2B 3.5 φ27 φ24 9 No.5 φ20.6 No.5 No.1 No.2 No.4 No.3 24 0 0.8 φ2 19.5 +0.1 0 Note: The position numbers are just for your reference and not shown on the connectors. ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3