DOMINANT Semiconductors Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM InGaN White : DDW-HJG TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. TM Features: > > > > > > > High brightness surface mount LED. Based on InGaN technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Communication: mobile phone flash light, backlights in mobile phone display. > Display: full color display video notice board. > Industry: general lighting © 2005 DomiLED is a trademark of DOMINANT Semiconductors. All rights reserved. Product specifications are subject to change without notice. 1 15/05/2009 V6.0 DOMINANT TM InGaN White: DDW-HJG Semiconductors Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number Color DDW-HJG-VW1-1 White 120 715.0 1125.0 1400.0 DDW-HJG-W2X1-1 White 120 1400.0 1800.0 2240.0 Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performace Current pushing should is used for dimming purposes. Electrical Characteristics at Tj=250C Part Number Vf @ If = 20 mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10 µA Min. (V) 2.9 3.3 3.8 5.0 DDW-HJG Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 85 mW 340 K/W 180 K/W Reverse Voltage; Ir max = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination DDW, White Color Grouping Dominant White Bin Structure 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.27 • • • A1 A2 0.28 • • • 0.29 A3 A4 0.30 • • • C1 C2 • • • 0.31 C3 C4 0.32 • • • E1 E2 0.33 • • • 0.34 E3 E4 • • • 0.35 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3561 0.3768 0.3943 0.3736 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3386 0.3593 0.3768 0.3561 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3768 0.3975 0.4150 0.3943 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3593 0.3800 0.3975 0.3768 Cx Bin E1 E2 E3 E4 Dominant color coordinate is measured with an accuracy of ± 0.01. 3 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination DDW, White Color Grouping White Bin Structure 0.40 4,500K 0.38 5,000K UU 5,650K 0.36 6,300K 7,000K 0.34 XU 0.32 10,000K UL VL WL XL YU 0.30 VU WU YL 0.28 0.26 0.24 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin YU YL XU XL WU WL VU VL UU UL 1 2 3 4 Cx 0.274 0.283 0.307 0.303 Cy 0.301 0.284 0.316 0.333 Cx 0.283 0.290 0.310 0.307 Cy 0.284 0.270 0.299 0.316 Cx 0.303 0.307 0.317 0.315 Cy 0.333 0.316 0.325 0.343 Cx 0.307 0.310 0.319 0.317 Cy 0.316 0.299 0.310 0.325 Cx 0.315 0.317 0.329 0.329 Cy 0.343 0.325 0.336 0.354 Cx 0.317 0.319 0.329 0.329 Cy 0.325 0.310 0.319 0.336 Cx 0.329 0.329 0.345 0.347 Cy 0.354 0.336 0.350 0.368 Cx 0.329 0.329 0.343 0.345 Cy 0.336 0.319 0.331 0.350 Cx 0.347 0.345 0.361 0.364 Cy 0.368 0.350 0.365 0.383 Cx 0.345 0.343 0.357 0.361 Cy 0.350 0.331 0.343 0.365 Dominant color coordinate is measured with an accuracy of ± 0.01. 4 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity @ IV (mcd) Brightness Group V1 715.0...900.0 V2 900.0...1125.0 W1 1125.0...1400.0 W2 1400.0...1800.0 X1 1800.0...2240.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) 0A 2.75 ... 3.05 00 3.05 ... 3.35 01 3.35 ... 3.65 02 3.65 ... 3.95 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 5 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Forward Current Vs Forward Voltage 2.4 50 2 Forward Current, mA Relative Intensity; Normalized at 20mA Relative Intensity Relative Luminous Intensity Vs Forward Current 1.6 1.2 0.8 0.4 0 40 30 20 10 0 0 10 20 30 40 2 50 2.5 3 3.5 4 Forward Current, mA Forward Voltage, V Maximum Current Vs Ambient Temperature Relative Intensity Vs. Wavelength 25 1 0.8 20 Relative Intensity Forward Current, If Forward Current, mA 0.9 15 10 0.7 0.6 0.5 0.4 0.3 0.2 0.1 5 0 0 10 20 30 40 50 60 70 80 400 90 100 Ambient temperature 450 500 550 600 650 700 750 800 Wavelength, nm Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 6 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination DomiLED • InGaN White : DDW-HJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 7 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Recommended Solder Pad 8 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 9 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Packaging Specification 10 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT Semiconductors ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM Semiconductors For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 11 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 235-240˚C 10-30s 250 225 Ramp-up 3˚C/sec max. Temperature (˚C) 200 175 183˚C 150 60-150s 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 360s max 25 0 50 100 150 200 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 22 Jan 2008 2 Add Vf Bining table 17 Jun 2008 2 Add new partno: DDW-HJG-W2X1-1 16 Jul 2008 2, 4 Add Thermal Resistance and Add New CCT White Color Bin 20 Feb 2009 2 Not for new design --> DDW-HJG-VW1-1 12 Mar 2009 1 Add automotive application 16 May 2009 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Semiconductors. 13 15/05/2009 V6.0 DOMINANT TM InGaN White : DDW-HJG Semiconductors Innovating Illumination About Us DOMINANT Semiconductors is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Semiconductors can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Semiconductors Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Semiconductors Malaysia Sdn. Bhd. Shanghai Representative Office DOMINANT Semiconductors (Shenzhen) Co. Ltd. Rm 1007, DaZhong Building, No. 1515 Zhong Shan (W) Rd, Shanghai, China 200235 Tel: +86 21 6428 6428 Fax: +86 21 6428 6880 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. #709, Yatap Leaders Bldg., 342-1 Yatap-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-828 Korea. Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751 Fax: +49 (0) 7264-89010-29 E-mail: [email protected]; [email protected] DOMINANT India Sales Office C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616 E-mail: [email protected] DOMINANT Semiconductors Innovating Illumination TM