CAPACITORS AXIAL LONG LIFE HIGH TEMPERATURE CEAJ Small case sizes Extended temperature life 2000 hours at +105˚C Product is available loose or taped and reeled SECTION 1 Sizes may reduce as technology continually improves. CASE TOLERANCE & LEAD SPEC. RANGE & DIMENSIONS V 6.3 10 162535 5063 µF dxl dxl dxl dxl dxl dxl dxl 0.47 1.0 2.2 5x12.5 3.3 5x12.5 4.7 5x12.5 6x12.5 10 5x12.5 6x12.5 15 5x12.5 6x12.5 6x12.5 6x12.5 22 5x12.5 6x12.5 6x12.5 6x16 6x16 33 5x12.5 6x12.5 6x12.5 6x16 6x16 8x16 47 5x12.5 6x12.5 6x16 6x16 8x16 8x16 68 6x12.5 6x16 8x16 8x16 8x16 100 6x12.5 6x16 8x16 8x16 8x20 10x16 150 6x16 8x16 8x16 8x20 10x16 10x20 220 8x13.5 8x16 8x16 8x20 10x16 10x20 10x25 330 8x16 8x20 8x16 10x16 10x20 10x25 13x25 470 8x16 8x20 10x16 10x20 10x25 13x25 13x30 680 8x20 8x20 10x20 10x25 13x25 13x30 16x30 1000 10x20 10x20 10x25 13x25 13x30 16x36 16x40 1500 10x25 10x25 13x25 13x30 16x30 16x40 18x40 2200 13x25 13x25 13x30 16x30 16x40 18x40 22x40 3300 13x30 13x30 16x30 16x40 18x40 22x40 4700 16x30 16x30 16x30 18x40 22x40 22x45 100 dxl 5x12.5 5x12.5 6x12.5 6x12.5 6x12.5 6x16 8x16 8x16 8x20 10x20 10x20 10x25 13x25 13x30 16x30 16x40 22x40 22x40 Case Tolerance Tolerance Dia. Case Case (D) Dia. (D) Length (L) 5.0 ≤ ± 0.5 ≤ ± 1.0 6.0 ≤ ± 0.5 ≤ ± 1.0 8.0 ≤ ± 0.5 ≤ ± 1.0 10.0 ≤ ± 0.5 ≤ ± 1.0 12.5 ≤ ± 0.5 ≤ ± 1.0 16.0 ≤ ± 0.5 ≤ ± 1.0 18.0 ≤ ± 0.5 ≤ ± 1.5 22.0 ≤ ± 1.0 ≤ ± 1.5 25.0 ≤ ± 1.0 ≤ ± 1.5 Lead Length (F) 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 Tolerance Lead Length (L) ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 Lead Wire Thickness Gauge (d) (AWG) 0.6 22 0.6 22 0.6 22 0.6 22 0.6 22 0.8 20 0.8 20 0.8 20 0.8 20 OUTLINE DRAWING Synthetic Rubber Vent Vinyl Sleeve Copper-Clad Steel Wire (tinned) Aluminium Case (with Vent on ø 10-18. No vent on other sizes) ø d ± 0,05 Diameter øD + ß max 35 min Length L + a max 35 min Dimensions in mm ORDERING INFORMATION CEAJ 100 Range Capacitance µF 16 Voltage V TR Options Tape/Reel Blank = Loose Products with a case diameter of 10mm or less will be supplied taped only. 31 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS AXIAL LONG LIFE HIGH TEMPERATURE CEAJ RIPPLE CURRENT SECTION 1 V6.3 10 162535 506380 µF 0.47 7 7 7 7 7 7 7 7 1.0 10 10 10 10 10 10 10 10 2.2 15 15 15 15 15 15 15 17 3.3 19 19 19 19 19 19 19 21 4.7 23 23 23 23 23 23 25 25 6.8 21 21 21 22 25 27 30 30 10 25 25 25 27 30 33 36 41 15 31 31 31 33 41 45 51 55 22 38 38 38 44 49 61 61 72 33 46 46 51 54 69 75 89 97 47 51 56 61 73 82 106 117 119 68 67 67 73 88 116 128 143 161 100 82 93 101 127 158 174 196 216 150 114 114 146 174 194 240 265 312 220 150 177 177 210 266 321 346 408 330 200 223 242 291 359 424 463 538 470 239 267 329 384 467 554 597 741 680 288 361 433 498 611 725 836 962 1000 393 488 572 672 816 1011 1163 1500 530 650 733 816 1052 1326 2200 733 783 912 1099 1398 3300 953 1077 1215 1483 4700 1215 1483 1585 6800 1602 1712 100 7 10 17 21 25 34 45 60 81 99 134 178 255 337 439 620 792 SPECIFICATION Item Performance Characteristics Operating Temperature Range -40˚C to +105˚C Rated Working Voltage Range 6.3 WVDC to 100WVDC Nominal Capacitance Range 0.47 Mfd. to 6800Mfd. Capacitance Tolerance ± 20% (M) or ± 10%(K) (+25˚C, 120Hz) Leakage Current ≤ 100WVDC = I ≤ 0.01CV or 4µA >100WVDC = I ≤ 0.01CV = +100µA After 5 minutes application at +25˚C at rated voltage Surge Voltage Rated WVDC 6.3 10 16 25 35 50 63 80 100 Surge voltage 8 13 20 32 44 63 79 100 125 Characteristics at Low Impedance ratio at 120Hz Temperature Rated Voltage [V] 6.3 10 16 25 35 50 63 80 100 -25˚C/+25˚C 4 3 2 2 2 2 2 2 2 -40˚C/+25˚C 10 8 6 4 3 3 3 3 3 Load Life Test After 1000 hours application of W.V. at 105˚C the capacitor shall meet the following limits: Capacitance change ≤ ± 20% of initial value Dissipation factor ≤ 200% of initial specified value Leakage current ≤ initial specified Shelf Life At 105˚C no voltage applied after 500 hours in the capacitor shall meet the following limits: Capacitance change ≤ ± 20% of initial value Dissipation factor ≤ 200% of initial specified value Leakage current ≤ 200 specified value 32 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758