CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD TEMP. SNAP-IN CLP Very high CV value Standard snap-in pin style 2000 hour long-life grade SECTION 1 The CLP is a snap-in electrolytic capacitor featuring the very highest volumetric efficiency ever offered by Dubilier. The product is suitable for all applications requiring high CV values, and the high-voltage parts are particularly suited to SMPS units. SPECIFICATION Item Performance Characteristics Voltage Range 16~100V 160~450V Capacitance Range 470~68000µF 47~2700µF Temperature Range -40~ +85°C -25~ +85°C Capacitance Tolerance -20~ +20°C (at 20°C, 120Hz) Leakage Current 1=0.02CV (µA) (After 5 minutes) Dissipation Factor (tan ∂) Rated Voltage(v) 16 25 35~50 63~100 160~200 250~450 D.F(%) 40 35 35 20 10* 15 Note * (15%) for case size D L (mm) = 35x20 The Value of D.F(%) is increased by 2% for every addition of 1000µF Rated Voltage(v) 16 25 35 05-63 80-100 160-400 450 Z(-25°C)/Z(20°C) 5 4 4 3 3 4 8 Z(-40°C)/Z(20°C) 18 15 10 10 10 8 Load LifeThe following specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 2000 hours at 85°C. Capacitance Change Within ± 20% of initial value D.F. tan ∂ 200% or less of initial specified value Leakage Current Initial specified value or less Shelf LifeAt 85°C no voltage applied after 500 hours the capacitors shall meet the following limits Capacitance Change ≤ ± 20% of initial value Dissipation Factor ≤ 150% of initial specified value Leakage Current Not exceed initial specified value ORDERING INFORMATION CLP 1000 Range Capacitance Diameter A = 22.4mm B = 25mm C = 30mm D = 35.5mm Height (length) A = 20mm B = 25mm C = 30mm D = 35mm E = 40mm F = 45mm G = 50mm CF Case code (see below) Two letter case code CF = 30mm dia. x 45mm height. 200 Voltage 65 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD TEMP. SNAP-IN CLP SECTION 1 AMBIENT TEMP./MULTIPLYING FACTOR FREQUENCY/MULTIPLYING FACTOR Temperature coefficient Frequency coefficient Temperature ( C ) 45 60 70 85 Frequency (Hz) 50 60 120 1K 10K-00K Factor 1.48 1.42 1.30 1.00 6.3-100V 0.88 0.90 1.00 1.15 1.16 160-250V 0.75 0.78 1.00 1.16 1.23 350-450V 0.74 0.76 1.00 1.10 1.15 OUTLINE DRAWING 0.9 +0.2/-0.1 0.8 ±0.1 10 Vinyl Sleeve .1 ±0 Negative 6.0 ±1 3.5 Safety Vent L ±2 D ±1 6 ±1 D ±1 Mounting Holes on Chassis 1.5 ±0.1 Terminals 66 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD TEMP. SNAP-IN CLP W.V. Cap Case Size [µF] øDxL[mm] 10000 22.4x30 25x25 15000 22.4x35 25x30 18000 22.4x40 16V 25x30 22000 25x40 30x30 27000 25x45 30x35 33000 30x40 35.5x30 39000 30x45 35.5x35 47000 30x50 35.5x40 56000 35.5x45 68000 35.5x50 5600 22.4x25 6800 22.4x30 25x25 8200 25x25 10000 25x30 30x25 25V 15000 22.4x50 25x40 18000 25x45 30x35 22000 30x40 27000 30x45 Max Ripple Current [A] rms (120Hz/85°C) 2.60 3.30 3.70 4.20 4.65 5.60 6.00 6.80 7.60 8.00 2.00 2.30 2.70 2.80 W.V. Cap Case Size [µF] øDxL[mm] 33000 30x50 25V 35.5x40 39000 35.5x45 3300 22.4x25 3900 22.4x30 4700 22.4x30 25x25 6800 25x30 35V 10000 25x40 30x30 15000 25x50 30x40 18000 30x45 22000 30x50 35.5x40 27000 35.5x50 2200 22.4x25 2700 22.4x30 50V 4700 22.4x40 25x35 6800 30x30 10000 30x45 35.5x35 Max Ripple Current [A] rms (120Hz/85°C) 6.50 7.50 1.80 2.10 2.20 2.60 3.10 4.10 4.60 5.30 6.9 1.70 1.93 2.40 3.80 4.80 3.70 4.20 4.80 4.98 W.V. Cap Case Size [µF] øDxL[mm] 15000 35x45 50V 35.5x40 22000 35.5x50 1500 22.4x25 2200 22.4x30 25x25 2700 22.4x35 25x30 22.4x40 3300 25x30 30x25 22.4x45 3900 25x35 63V 30x30 22.4x50 4700 25x40 35.5x25 6800 30x40 35.5x30 8200 30x45 35.5x35 10000 35.5x40 1500 22.4x30 1800 22.4x35 25x30 22.4x40 2200 25x30 80V 30x25 22.4x45 2700 25x35 30x30 22.4x50 3300 25x40 30x30 3900 25x45 30x35 Max Ripple Current [A] rms (120Hz/85°C) 3.80 6.70 1.60 2.0 2.30 2.30 2.50 3.30 3.60 4.80 4.80 1.70 1.90 2.1 2.50 2.80 3.10 Other values/ sizes by request 67 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 1 RANGE CAPACITORS ALUMINIUM ELECTROLYTIC STANDARD TEMP. SNAP-IN CLP SECTION 1 W.V. Cap Case Size [µF] øDxL[mm] 4700 25x50 80V 30x40 6800 30x50 35.5x40 1000 22.4x30 25x25 22.4x40 1500 25x30 30x25 22.4x45 1800 25x35 30x30 100V 22.4x50 2200 25x40 30x30 2700 25x45 30x35 3300 25x50 30x40 3900 30x45 35.5x35 4700 30x50 470 22.4x30 25x25 680 22.4x40 30x25 1000 160V 1500 1800 2200 470 200V 1000 1500 1800 220 250V 330 25x45 30x35 35.5x30 30x45 35.5x35 30x50 35.5x40 35.5x45 22.4x35 25x30 30x25 25x50 30x40 35.5x30 30x50 35.5x40 35.5x45 22.4x30 25x25 22.4x35 25x30 30.x25 Max Ripple Current [A] rms (120Hz/85°C) 3.60 4.10 1.40 1.70 2.10 2.20 2.64 3.0 W.V. Cap Case Size [µF] øDxL[mm] 22.4x45 470 25x40 250V 30x30 1000 30x50 35.5x40 47 68 100 400V 220 330 470 47 450V 100 220 22.4x25 22.4x25 22.4x30 25x25 22.4x50 25x40 30x30 30x40 35.5x45 22.4x25 22.4x35 25x30 25x50 Max Ripple Current [A] rms (120Hz/85°C) 1.80 3.00 0.45 0.55 0.70 1.10 1.60 2.10 0.50 0.70 1.20 3.40 4.01 1.70 2.10 2.70 3.50 3.90 4.50 1.80 2.80 3.80 3.79 1.15 1.40 68 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758