AUDIO PCB 6.4 Ø HEADPHONE JACK SECTION 6 Competitively priced Industry Compatible PCB Mounting Available in plastic or metal bushing SPECIFICATION Contact resistance (DCR 0.1A) 1, Initial, before any testing: 2, After life test with mating plug: Insertation Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: (1) Between the terminals (NC): 30mΩ (2) Plug to sleeve, tip ,ring (NO) contact: 50mΩ (1) Between the terminals (NC): 60mΩ (2) Plug to sleeve, tip, ring (NO) contact: 100mΩ 0.3kg - 3.0kg Terminals must withstand a 500g minimum pull for 10 seconds 0.3kg - 3.0kg before movement or break from housing occurs Terminal for PC board temperature: 260 ± 5˚C for 5 ± 1.0 seconds -25˚C to 100˚C More than 100MΩ by 500v DC at 90 - 95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A OUTLINE DRAWING ORDERING INFORMATION DBC HJ 0695 Dubilier Connectors 6.4Ø Earphone Socket Connector Series -2T Bushing Contacts Blank = Plastic M = Metal -2T -3RT -3TS -4R -4TC -4TM --5 152 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758