T•P T•P DU RO C NEW TERMINAL BLOCKS 5, 5.08, 7.5, 7.62, 10 AND 10.16mm SCREWLESS DU RO C 5, 5.08, 7.5, 7.62, 10 and 10.16mm pitch Breakable to desired number of poles 1-36 poles on 5 & 5.08mm pitch 0.3-1.5mm2 wire acceptance UL/ VDE/ CE approved 1-24 poles on 7.5 & 7.62mm pitch Flame retardant material 1-18 poles on 10 & 10.16mm pitch SPECIFICATION 7.5/7.62/10/10.16 5/5.08 12A/750V 12/250V ≥3KV/60sec ≥2.5KV/60sec ≥5MΩ -20°C to 125°C 160° UL94V-0 flame retardant PA66 5µ tinned, phosphor bronze Zinc plated steel Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Spring: Recommended PCB hole size: ø1.1mm OUTLINE DRAWING L 12.5 L 1.5 12.5 3.6 3.6 9.2 9.2 DBCTB91 13.9 DBCTB54 13.9 1.5 0.4 0.8 5 3.5 0.4 0.8 3 5 5 L = Length 3.5 3.5 3.5 7.5 3 L 12.5 L 1.5 12.5 3.6 9.2 3.6 0.4 0.8 3.08 5 9.2 DBCTB92 13.9 DBCTB75 13.9 1.5 5.08 3.5 0.4 0.8 L = Length 5 3.5 3.5 L L 3.6 3.6 9.2 13.9 9.2 13.9 DBCTB94 0.4 0.8 5 1.5 12.5 1.5 12.5 DBCTB93 3.5 7.62 3.08 3.5 10 0.4 0.8 3.5 5 3 3.5 10.16 3.5 3.08 SECTION 18 ORDERING INFORMATION DBC TB Dubilier Connectors Series Terminal Block 54 /2 Style 54 -5mm 75-5.08mm 91-7.5mm 92-7.62mm 93-10mm 94-10.16mm Nº of Ways 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 12 Please consult office for further details How to calculate lengths 5mm pitch 5.08 pitch 7.5mm pitch 7.62mm pitch 10mm pitch 10.16mm pitch No.Poles Multiply by 5mm + 1.5mm No.Poles Multiply by 5.08mm + 1.5mm No.Poles Multiply by 7.5mm - 1mm No.Poles Multiply by 7.62mm - 1.04mm No.Poles Multiply by 10mm - 3.5mm No.Poles Multiply by 10mm - 3.58mm 390 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758