T•P T•P DU RO C NEW TERMINAL BLOCKS 3.5mm + 3.81mm PITCH - SCREWLESS DU RO C 3.5mm and 3.81mm pitch UL approved Interlocking 45 degree cable entry 1.5mm2 wire acceptance SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Moulding: Pin/terminal: Recommended PCB hole size: 4A/450V (300V UL) 7 ≥2.5KV/60sec ≥5MΩ -20°C to +110°C Grey UL94V-0 flame retardant PA68 5µ tinned, nickel plated brass OUTLINE DRAWING ORDERING INFORMATION 5 1.5 1 P 2.3 13.2 3.6 11.5 L DBC TB 70 /2 Dubilier Connectors Series Style Nº of Ways Terminal Block 70 = 3.5mm 77 = 3.81mm 2 = 2 ways 3 = 3 ways 0.4 1˚ Pin side 2.3 3.25 12 * Other Number of ways are available up to 12 Please consult office for further details 0.8 P DU RO C T•P T•P 5 ø1mm NEW TERMINAL BLOCKS 5.08mm PITCH - SCREWLESS DU RO C 5.08mm pitch UL approved 2-7 pole solid block Flame retardant material 0.3 to 1.5mm2 wire acceptance SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Spring: Recommended PCB hole size: 12A/250V ≥4KV/60sec ≥5MΩ -20°C to 125°C 160°C UL94V-0 flame retardant PA66 5µ tinned, phosphor bronze OUTLINE DRAWING DBC TB 41 /2 Dubilier Connectors Series Style Nº of Ways 3.5 13 3.8 Ø 1.9 0.5 3.4 10.16 1 1.05 5.08 5.08 4.03 389 www.dubilier.co.uk Terminal Block 2 = 2 ways 3 = 3 ways SECTION 18 3 ø1.1mm ORDERING INFORMATION L 16.2 Zinc plated steel T•P T•P DU RO C NEW TERMINAL BLOCKS 5, 5.08, 7.5, 7.62, 10 AND 10.16mm SCREWLESS DU RO C 5, 5.08, 7.5, 7.62, 10 and 10.16mm pitch Breakable to desired number of poles 1-36 poles on 5 & 5.08mm pitch 0.3-1.5mm2 wire acceptance UL/ VDE/ CE approved 1-24 poles on 7.5 & 7.62mm pitch Flame retardant material 1-18 poles on 10 & 10.16mm pitch SPECIFICATION 7.5/7.62/10/10.16 5/5.08 12A/750V 12/250V ≥3KV/60sec ≥2.5KV/60sec ≥5MΩ -20°C to 125°C 160° UL94V-0 flame retardant PA66 5µ tinned, phosphor bronze Zinc plated steel Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Spring: Recommended PCB hole size: ø1.1mm OUTLINE DRAWING L 12.5 L 1.5 12.5 3.6 9.2 3.6 0.8 9.2 DBCTB91 13.9 DBCTB54 13.9 1.5 0.4 5 3.5 0.4 0.8 3 5 5 L = Length 3.5 3.5 3.5 7.5 3 L 12.5 L 1.5 12.5 3.6 9.2 3.6 0.8 0.4 3.08 5 9.2 DBCTB92 13.9 DBCTB75 13.9 1.5 5.08 3.5 0.4 0.8 L = Length 5 3.5 3.5 L L 3.6 3.6 9.2 13.9 9.2 13.9 DBCTB94 0.4 0.8 5 3.5 1.5 12.5 1.5 12.5 DBCTB93 3.5 7.62 3.08 10 0.4 0.8 3.5 5 3 3.5 10.16 3.5 3.08 SECTION 18 ORDERING INFORMATION DBC TB Dubilier Connectors Series Terminal Block 54 /2 Style 54 -5mm 75-5.08mm 91-7.5mm 92-7.62mm 93-10mm 94-10.16mm Nº of Ways 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 12 Please consult office for further details How to calculate lengths 5mm pitch 5.08 pitch 7.5mm pitch 7.62mm pitch 10mm pitch 10.16mm pitch 390 www.dubilier.co.uk No.Poles Multiply by 5mm + 1.5mm No.Poles Multiply by 5.08mm + 1.5mm No.Poles Multiply by 7.5mm - 1mm No.Poles Multiply by 7.62mm - 1.04mm No.Poles Multiply by 10mm - 3.5mm No.Poles Multiply by 10mm - 3.58mm