SURFACE MOUNT SMD - 105˚C LOW IMPEDANCE DVJL Cylindrical leadless type for surface mounting SECTION 1 Very low impedance and high ripple current at 100K Hz Suitable for DC-DC converter, DC-AC inverter, etc. New expanded CV range, up to 1500µF Anti-solvent (2 minutes) Designed for automatic mounting and reflow soldering SPECIFICATION Item Performance Category Temperature Range (°C) –50 to +105 Tolerance of Rated Capacity (%) ± 20 Leakage Current (µA) Less than 0.01CV or 3 whichever is larger (after 2min) C: rated capacitance (µF) Tangent of Loss Angle (tan∂) Rated Voltage (V) 6.3 10 16 25 35 50 tan∂ (max) 0.28 0.24 0.20 0.16 0.14 0.10 Rated Voltage (V) 6.3 10 16 25 35 50 Z–25°C / Z+20°C 4 3 2 2 2 2 Z–55°C / Z+20°C 8 5 4 3 3 3 Characteristics at high and low temperature Impedance Ratio (max) Endurance (105°C) (Applied Ripple Current) Test Time 2000 hours (8 x 6.5 or less: 1000 hours) Leakage Current The initial specified value or less Percentage of Capacitance Change Within ± 25% of initial value Tangent of Loss Angle 200% or less of the initial specified value Shelf Life (105°C) Test Time: 1000 hours: other items are the same as those for endurance. JIS C5101-1 Applicable Standards JIS C1501-1, –18 1998 (IEC600384-1 1992, -18 1993) coefficient of Frequency for rated ripple current Frequency (Hz)/Rated Voltage 50-60 120 1k 10k - 100k 6.3 to 50 0.64 0.5 0.75 1 OUTLINE DRAWING B DØ + DØ B - + L A W 0.3 Max 0.3 Max L A W I I Dimensions in mm I P P DØ L A B I W P 4 5.8 +/- 0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.8 +/- 0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.8 +/- 0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 6.3 7.7 +/- 0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 8 10.5 +/- 0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10.5 +/- 0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 I ORDERING INFORMATION DVJL 47 6.3 LF Range Capacitance µF Voltage Lead Free 79 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SURFACE MOUNT SMD - 105˚C LOW IMPEDANCE DVJL SECTION 1 RANGE & CASE SIZE DØ x Lmm Part No. W.V (V.DC) Cap (µF) ESR (120Hz/+20°C) max Ripple Current (120Hz/+105°C) (mA) rms max Size dia/height DVJL476.3-LF 6.3 47 0.76 150 5X5.8 DVJL1006.3-LF 6.3 100 0.44 230 6.3X5.8 DVJL1506.3-LF 6.3 150 0.44 230 6.3X5.8 DVJL2206.3-LF 6.3 220 0.44 230 6.3X5.8 DVJL3306.3-LF 6.3 330 0.34 280 6.3X7.7 DVJL4706.3-LF 6.3 470 0.17 450 8X10.5 DVJL6806.3-LF 6.3 680 0.17 450 8X10.5 DVJL10006.3-LF 6.3 1000 0.17 450 8X10.5 DVJL15006.3-LF 6.3 1500 0.09 670 10X10.5 DVJL2210-LF 10 22 1.8 80 4X5.8 DVJL3310-LF 10 33 0.76 150 5X5.8 DVJL6810-LF 10 68 0.44 230 6.3X5.8 DVJL22010-LF 10 220 0.34 280 6.3X7.7 DVJL33010-LF 10 330 0.17 450 8X10.5 DVJL47010-LF 10 470 0.17 450 8X10.5 DVJL100010-LF 10 1000 0.09 670 10X10.5 DVJL1516-LF 16 15 1.8 80 4X5.8 DVJL2216-LF 16 22 0.76 150 5X5.8 DVJL4716-LF 16 47 0.44 230 6.3X5.8 DVJL6816-LF 16 68 0.44 230 6.3X5.8 DVJL10016-LF 16 100 0.44 230 6.3X5.8 DVJL15016-LF 16 150 0.34 280 6.3X7.7 DVJL22016-LF 16 220 0.34 280 6.3X7.7 DVJL33016-LF 16 330 0.17 450 8X10.5 DVJL47016-LF 16 470 0.17 450 8X10.5 DVJL68016-LF 16 680 0.09 670 10X10.5 DVJL1025-LF 25 10 1.8 80 4X5.8 DVJL1525-LF 25 15 0.76 150 5X5.8 DVJL2225-LF 25 22 0.76 150 5X5.8 DVJL3325-LF 25 33 0.44 230 6.3X5.8 DVJL4725-LF 25 47 0.44 230 6.3X5.8 DVJL6825-LF 25 68 0.44 230 6.3X5.8 DVJL10025-LF 25 100 0.34 280 6.3X7.7 DVJL15025-LF 25 150 0.17 450 8X10.5 DVJL22025-LF 25 220 0.17 450 8X10.5 DVJL33025-LF 25 330 0.17 450 8X10.5 DVJL47025-LF 25 470 0.09 670 10X10.5 DVJL4.735-LF 35 4.7 3.2 65 4X5.3 DVJL1035-LF 35 10 0.76 150 5X5.8 DVJL1535-LF 35 15 0.76 150 5X5.8 DVJL2235-LF 35 22 0.76 150 5X5.8 DVJL3335-LF 35 33 0.44 230 6.3X5.8 DVJL4735-LF 35 47 0.44 230 6.3X5.8 DVJL6835-LF 35 68 0.34 280 6.3X7.7 DVJL15035-LF 35 150 0.17 450 8X10.5 DVJL22035-LF 35 220 0.17 450 8X10.5 DVJL33035-LF 35 330 0.09 670 10X10.5 DVJL1050-LF 50 10 0.86 170 6.3X6.3 DVJL2250-LF 50 22 0.86 170 6.3X6.3 DVJL3350-LF 50 33 0.66 195 6.3X8 DVJL4750-LF 50 47 0.66 195 6.3X8 DVJL10050-LF 50 100 0.32 350 8X10.5 DVJL22050-LF 50 220 0.18 700 10X10.5 80 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758