SURFACE MOUNT ELECTROLYTIC 105˚C REDUCED SIZE DVJR SMT electrolytic SECTION 1 Small can sizes Long life grade (up to 2000 hours @ 105°C) New expanded CV range Designed for automatic mounting and reflow soldering SPECIFICATION Item Category Temperature Range (°C) Tolerance of Rated Capacity (%) Leakage Current (µA) Tangent of Loss Angle (tan∂) Performance –50 to +105 ± 20 Less than 0.01CV or 3 whichever is larger (after 2min) C: rated capacitance (µF) Rated Voltage (V) 6.3 10 16 25 35 50 tan∂ (max) 0.30 0.24 0.22 0.16 0.13 0.12 Rated Voltage (V) 6.3 10 16 25 35 50 Impedance Ratio (max) 4 3 2 2 2 2 Z–25°C / Z+20°C Characteristics at high and low temperature Z–40°C / Z+20°C 8 5 4 3 3 3 Test Time* 2000 hours Leakage Current The initial specified value or less Percentage of Capacitance Change Within 20% of initial value Tangent of Loss Angle 200% or less of the initial specified value Dø Test Time: 1000 hours: other items are the same as those for endurance. JIS C5101-1 JIS C5101-1, –18 1998 (IEC600384-1 1992, -18 1993) Endurance (105°C) (Applied Ripple Current) Shelf Life (85°C) Applicable Standards 0.3 Max * at the end of part number on page 00 denotes 1000L hours OUTLINE DRAWING B Dø W A 0.3 Max L I P DØ L A B I W P 4 5.3 +/- 0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3 +/- 0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3 +/- 0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 8 6.5 +/- 0.3 8.4 8.4 3.4 0.5 to 0.8 2.3 8 10 +/- 0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 10 10 +/- 0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 I B COEFFICIENT OF FREQUENCY FOR RATED RIPPLE CURRENT Frequency (Hz)/ Rated Voltage 6.3 to 16 25 to 35 50 to 63 I P 100 W 50-60 120 1k 10k - 100k 0.8 0.8 0.8 0.7 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 A I ORDERING INFORMATION DVJR 47 35 LF Series Capacitance Voltage Lead Free 76 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SURFACE MOUNT ELECTROLYTIC 105˚C REDUCED SIZE DVJR Part No. W.V (V.DC) Cap (µF) ESR (120Hz/+20C) max Ripple Current (120Hz/+105C) (mA) rms max Size dia/height *DVJR226.3-LF 6.3 22 *DVJR476.3-LF 6.3 47 23 21 4x5.5 11 36 *DVJR1006.3-LF 6.3 5x5.5 100 5 61 6.3x5.5 DVJR2206.3-LF DVJR3306.3-LF 6.3 220 2.3 178 8x10 6.3 330 1.5 178 8x10 DVJR4706.3-LF 6.3 470 1 324 10x10 DVJR10006.3-LF 6.3 1000 0.5 324 10x10 *DVJR3310-LF 10 33 13 31 5x5.5 DVJR22010-LF 10 220 2 178 8x10 DVJR100010-LF 10 1000 0.4 324 10x10 DVJR1016-LF 16 10 40 27 4x6 DVJR2216-LF 16 22 18 46 5X6 DVJR4716-LF 16 47 8.5 78 6.3X6 DVJR10016-LF 16 100 3.6 110 6.3x5.5 DVJR10016D8-LF 16 100 3.6 110 8x6.5 DVJR22016-LF 16 220 1.7 324 10x10 DVJR33016-LF 16 330 1.1 324 8x10 DVJR33016D10-LF 16 330 1.1 324 10X10 DVJR47016-LF 16 470 0.78 324 10x10 DVJR2225-LF 25 22 14 62 6.3X6 DVJR3325-LF 25 33 9 76 6.3X6 DVJR4725-LF 25 47 5.7 110 8x6.5 DVJR10025-LF 25 100 2.7 178 8x10 DVJR33025-LF 25 330 0.8 324 8x10 DVJR33025D10-LF 25 330 0.8 324 10x10 DVJR4.735-LF 35 4.7 53 23 4X6 DVJR1035-LF 35 10 25 39 5X6 DVJR2235-LF 35 22 11 65 6.3x6 DVJR3335-LF 35 33 6.5 110 8x6.5 DVJR4735-LF 35 47 4.6 110 6.3x6 DVJR4735D8-LF 35 47 4.6 110 8x6.5 DVJR10035-LF 35 100 2.2 324 8X10 DVJR22035-LF 35 220 0.98 324 10x10 DVJR0.150-LF 50 0.15 2321 4 4X6 DVJR0.2250-LF 50 0.22 1055 5 4X6 DVJR0.3350-LF 50 0.33 703 6 4X6 DVJR0.4750-LF 50 0.47 494 7 4X6 DVJR1.050-LF 50 1 232 12 4X6 DVJR2.250-LF 50 2.2 105 19 4X6 DVJR3.350-LF 50 3.3 70 22 4X6 DVJR4.750-LF 50 4.7 49 29 5X6 DVJR1050-LF 50 10 23 47 6.3X6 DVJR2250-LF 50 22 9.1 110 8x6.5 DVJR3350-LF 50 33 6 178 8x10 DVJR4750-LF 50 47 4.2 178 8x10 DVJR10050-LF 50 100 2 178 8x10 DVJR10050D10-LF 50 100 2 324 10x10 77 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 1 STANDARD PRODUCT & CASE SIZE TABLE DØxL mm