SURFACE MOUNT CHIP RESISTOR RPC Small in size and light in weight Electrical stability and high reliability Excellent mechanical strength and high frequency characteristics Reduction of assembly costs and matching with auto placement machines Hybrid thick and thin integrated circuits Telecommunication equipment Computers OUTLINE DRAWING CONSTRUCTION L Protective Coating T T Output Termination Layer: Solder Middle Termination Layer: Sn W H t Range RPC04 RPC16 RPC12 RPC25 RPC33 RPC50 RPC100 H t Size Code 0402 0603 0805 1206 1210 2010 2512 Inner Termination Layer: Sn Length L (mm) 1.00 ± 0.10 1.60 ± 0.10 2.00 ± 0.10 3.10 ± 0.10 3.10 ± 0.10 5.00 ± 0.10 6.35 ± 0.10 High Purity Alumina Substrate Width W (mm) 0.50 ± 0.05 0.80 ± 0.10 1.25 ± 0.10 1.60 ± 0.10 2.60 ± 0.15 2.50 ± 0.15 3.20 ± 0.15 Height H (mm) 0.35 ± 0.05 0.45 ± 0.1 0.50 ± 0.1 0.55 ± 0.1 0.55 ± 0.1 0.55 ± 0.1 0.55 ± 0.1 Terminal T (mm) 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.25 0.50 ± 0.25 0.60 ± 0.25 0.60 ± 0.25 Resistive Element (Ru0 ) 2 Terminal t (mm) 0.25 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.25 0.5 ± 0.20 0.5 ± 0.20 0.5 ± 0.20 ORDERING INFORMATION RPC 25 103 J Range Size 04=0402 16 = 0603 12 = 0805 25 = 1206 33 = 1210 50 = 2010 100 = 2512 Value Tolerance F = ± 1% J = ± 5% Remark: E96 is only available for 1% 137 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 4 SURFACE MOUNT SURFACE MOUNT SURFACE MOUNT CHIP RESISTOR RPC POWER RATING Size Code 0402 0402 0603 Power Rating 1/16w 1/16w 1/10w Max Working Voltage 50v 50v 50v Max Overload Voltage 100v 100v 100v F(±1%) E-96 1R - < 10R 10R-10M 1R - < 10R 0603 0805 1/10w 1/8w 50v 150v 100v 300v 10R-10M 1R - < 10R 0805 1206 1/8w 1/4w 150v 200v 300v 400v 10R-10M 1R - < 10R 1206 1210 1/4w 1/2w 200v 200v 400v 500v 10R-10M 1R - < 10R 2010 2010 1/2w 3/4w 200v 200v 500v 500v 10R-10M 1R - < 10R 2010 2512 3/4w 1w 200v 200v 500v 500v 10R-10M 1R - < 10R 2512 1w 200v 500v 10R-10M Resistance Range/PPM PPM/°C J(±5%) E-24 200 1R - < 10R 100 10R-10M 200 1R - < 10R 10M-22M 100 10R-10M 200 1R - < 10R 10M-22M 100 10R-10M 200 1R - < 10R 10M-22M 100 10R-10M 200 1R - < 10R 10M-22M 100 10R-10M 200 1R - < 10R 10M-22M 100 10R-10M 200 1R - < 10R 10M-22M 100 10R-10M PPM/°C 200 100 200 100 200 100 200 100 200 100 200 100 200 100 SECTION 4 * Low value resistors available between 0.01Ω - 1Ω in ±1% & ±5% TCR = 200ppm/˚C to 600ppm/˚C 138 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SURFACE MOUNT SURFACE MOUNT CHIP RESISTOR RPC OTHER SPECIFICATIONS & TEST METHODS PERFORMANCE TEST Temperature coefficient Thermal Shock Low Temperature Operation Short Time Overload Insulation Resistance Dielectric Withstand Voltage Resistance to Soldering Heat Moisture Resistance Life Resistance to Soldering Heat Bending Strength TEST METHOD MIL-STD-202F, Method 304 -55˚C to +125˚C MIL-STD-202F, Method 107 5 Cycles, -55˚C to +125˚C (Step by Step 2 min) MIL-R-55342D, Para.4.7.4 One Hour at -65˚C Followed by 45 min RCWV MIL-R-55342D, Para.4.7.5 2.5 Times RCWV for 5 Seconds MIL-STD-202F, Method 302 RCOV for 1 minute MIL-STD-202F, Method 301 R.M.S for 1 minute MIL-STD-202F, Method 210C Soldered to Test Board at 260˚C for 10 Seconds MIL-STD-202F, Method 160F 42 Cycles. Total 1000 Hours MIL-STD-202F, Method 108A 1000 Hours at 70˚C RCWV Intermittent MIL-STD-202F, Method 210C 260˚C, for 5 Seconds JIS-C-5202, Para.6.1.4, Unit Mounted in Centre of 90mm Board Length Deflected 5mm (power chip 2mm) in Either Direction for 5 Seconds 1% TOL. by Type ±(0.5%+0.05Ω) ±(0.5%+0.05Ω) ±(1%+0.05Ω) 10000MΩ by Type ±(0.5%+0.05Ω) ±(0.5%+0.05Ω) ±(1%+0.05Ω) 95% min. coverage ±(1%+0.05Ω) 5% TOL. by Type ±(1%+0.05Ω) ±(1%+0.05Ω) ±(2%+0.05Ω) 10000MΩ by Type ±(1%+0.05Ω) ±(2%+0.05Ω) ±(3%+0.05Ω) 95% min. coverage ±(1%+0.05Ω) SECTION 4 For taping and packaging specification please see the RTF range. 139 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758