SIL15E Series 12Vin DC/DC CONVERTERS single output E Class Non-isolated 1 NEW Product • • • • • • • 15A Current rating Input voltage range: 10V - 14V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 94% @ 12Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint and pin out The SIL15E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 12V source. The SIL15E offers a range of fixed outputs and one wide trim output unit at an industry leading 15A which allows maximum design flexibility and a pathway for future upgrades. The SIL15E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL15E offers compact size and efficiencies of up to 94%. TÜV 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability 0.8V to 3.63V Setpoint accuracy ±0.4% typ. Line regulation ±0.2% typ. Load regulation ±1.0%typ. Total error band ±3.0% typ. Minimum load 0A Overshoot/undershoot Ripple and noise None 5Hz to 20MHz Temperature co-efficient 60mV pk-pk 25mV rms ±0.01%/ºC Transient response 100mV max. deviation 100µs recovery to within ±1.0% Remote sense 10% Vo compensation Input voltage range 10 to 14VDC No load Input current (max.) Input reflected ripple Remote ON/OFF Start-up time 70mA 5.5A max. @ Io max. and Vout = 3.3V 60mA rms (See Note 1) 35ms EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency See table Insulation voltage Switching frequency Non-isolated Fixed 200kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability Dimensions (Vertical model) Pin length UL94V-0 (LxWxH) 50.8 x 7.8 x 12.7mm 2.0 x 0.31 x 0.5 inches 0.135 ±0.02 in (3.43 ±0.5mm) Weight MTBF INPUT SPECIFICATIONS Input current Electrostatic discharge Conducted immunity Radiated immunity 5g (0.18oz) Telcordia SR-332 7,042,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) Operating ambient, temperature Non-operating -40ºC to +85ºC -40ºC to +125ºC PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 file No. E174104 TÜV TÜV Product Service (EN60950) Certificate No. B02 12 38272 035 CB report and certificate to IEC60950 File Name: sil15e_12.pdf Rev: 14 Aug 2003 SIL15E Series 12Vin s i n g l e o u t p u t DC/DC CONVERTERS E Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (3) (TYP.) LINE LOAD MODEL NUMBER 49.5W 10V - 14V 0.8V - 3.63V 0A 15A 94% ±0.2% ±1.0% SIL15E-12W3V3 Part Number System with Options REGULATION SIL15E-12S3V3-V Product Family SIL = Single In Line Rated Output Current 15 = 15Amps Performance E = Enhanced Performance Mounting Option V = Vertical H = Horizontal Output Voltage 0.8V - 3.63V Type of Output S = Single W = Wide Output Voltage Adjustment of the SIL10-05Wxxx SeriesInput Voltage 12 = 10V - 14V Output Voltage Adjustment of the SIL15E-12W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL15E-12W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8V to 3.63V. When the SIL15E-12W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.8V Notes 1 The SIL15E features an ‘Active High’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL15E: Configuration Remote pin open circuit Remote pin pulled low [Von/off <0.8V] Remote pin pulled high [Von/off >1.6V] Converter Operation Unit is ON Unit is OFF Unit is ON An ‘Active Low’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. 2 Full de-rating curves available in both the Long Form Data Sheet and Application Note. File Name: sil15e_12.pdf Rev: 14 Aug 2003 SIL15E Series 12Vin s i n g l e o u t p u t DC/DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm SIDE VIEW NEW Product FRONT VIEW 2.000 (50.80) 0.307 (7.80) 0.500 (12.70) PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 4 5 1 2 J1 0.168 (4.26) 3 J2 5 6 0.100 (2.54) 1.900 (48.26) 0.050 (1.27) ALL DIMENSIONS IN INCHES (MM) J1 PIN CONNECTIONS PIN NUMBER FUNCTION 1 +Vout 2 +Vout 3 Remote Sense (+) 4 +Vout 5 Ground J2 PIN CONNECTIONS PIN NUMBER FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF Data Sheet © Artesyn Technologies® 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: sil15e_12.pdf Rev: 14 Aug 2003