PRODUCT DATA SHEET P5300 ADSL Transformer Features Applications ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ST/Alcatel MTK-20140, 20150, 20450 ∗ ADSL CO and CPE over POTS Lead-free (Pb-free) RoHS compliant Low Distortion IEC 60950 Certified UL 1950 and EN 60950 Compliant Supplementary Insulation Surface Mount Industry Standard Footprint DESCRIPTION P5300 is a low distortion transformer for ADSL CO and CPE applications over POTS. P5300 is certified to IEC 60950 for supplementary insulation for a primary circuit, 250V working voltage, and is supported by an IEC CB Test Certificate. The part is completely lead-free, compliant with RoHS Directive 2002/95/EC, and suitable for lead-free and conventional processing. ETALDOC 823/4 Page 1 of 4 The safety system yields very low transformer parasitics, ensuring that P5300 exhibits excellent frequency response and balance; in combination with its good harmonic distortion performance, P5300 is ideally suited to low cost yet demanding applications. June 2005 P5300 SPECIFICATIONS Electrical Typical values at T = 25ºC, unless otherwise stated. Parameter Conditions Min Typ Max Units Inductance 10kHz 100mV 1-5 (link 2-4) 389 409.5 430 µH Leakage inductance 100kHz, 100mV, 1-5 (link 2-4; link 6, 7, 9, 10) - - 6.5 µH Interwinding capacitance 100kHz 100mV 1-10 (link 2, 4, 5; link 7, 9, 6) - 21 30 pF Third Harmonic Distortion 30kHz +20dBm (3.16Vrms) in line 25 ohm source 100 ohm line (link 2-4; link 7-9) - - -78 dB DC resistance 1-5 (link 2-4) 10-6 (link 7-9) - - 1.4 0.65 Ω Ω Turns ratio 1-5: 10-6 (link 4, 2; link 7,9) 1.96 2.00 2.04 - 50Hz DC (1, 2, 4, 5 : 6, 7, 9, 10) 2.12 3.0 - - kVrms kV -40 -40 - +85 +85 ºC ºC Voltage isolation Operating range: Functional Storage (1) Ambient temperature Notes 1. Components are 100% tested at 3.25kV DC ETALDOC 823/4 Page 2 of 4 June 2005 P5300 CONSTRUCTION Dimensions e2 Fig. 1 17.15 max (0.67) Fig. 2 15.40 2,50 (0.098) Connections (0.606) 0.80 (0.032) 0.70 (0.028) 2,5 (0.10) 0.7 (0.03) 12.9 max (0.51) 13.0 (0.51) 12.2 max (0.48) CHAMFER ON BOBBIN Finish: SnAg. JESD97 category = e2. Dimensions shown are in millimetres (inches). SAFETY ABSOLUTE MAXIMUM RATINGS Compliant with IEC 60950:1999 and CAN/CSA C22.2 No.950-95/UL1950 Third Edition, supplementary insulation for a primary circuit, 250V maximum working voltage, flammability class V-0. ETALDOC 823/4 Page 3 of 4 (Ratings of components independent of circuit). Short term isolation voltage (1s) 2.12kVrms, 3.0kVDC Storage temperature -40ºC to +85ºC Reflow temperature (10s) 260ºC June 2005 P5300 CERTIFICATION COPYRIGHT Certified under the IEC CB scheme to IEC 60950:1999 (IEC CB Test Certificate No. GB637W) sub-sections 1.5, 2.9, 2.10.3.1, 2.10.3.2, 2.10.4, 2.10.5, 2.10.5.2, 2.10.5.4, 4.5, 4.7.3, 4.7.3.1, 4.7.3.4, (class V-0) and 5.2, for a maximum working voltage of 250Vrms, nominal mains supply voltage not exceeding 300Vrms and a maximum operating temperature of +85ºC in Pollution Degree 2 environments, supplementary insulation for a primary circuit. Certification pending under the Component Recognition Program of Underwriters Laboratories Inc. to US and Canadian requirements CAN/CSA C22.2 No. 950-95/UL1950, Third Edition, maximum working voltage 250Vrms, Pollution Degree 2, supplementary insulation for a primary circuit. ETAL and P5300 are Trade Marks of Profec Technologies Ltd. The Trade Mark ETAL is registered at the UK Trade Marks Registry. Profec Technologies Ltd. is the owner of the design right under the Copyright Designs and Patents Act 1988 and no rights or licences are hereby granted or implied to any third party. © 2000-2005 Profec Technologies Ltd. Reproduction prohibited. UL File number E203175 Additionally, Profec Technologies certifies all transformers as providing voltage isolation of 2.12kVrms, 3kV DC minimum. All shipments are supported by a Certificate of Conformity to current applicable safety standards. ISO 9001 FM 25326 ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: [email protected] ETALDOC 823/4 Page 4 of 4 June 2005