EUROQUARTZ XOPL53100UD

FACTORY PROGRAMMED OSCILLATORS
XOPL53 SERIES
Low Jitter 5mm x 3.5mm SMD
Programmable Oscillators
OUTLINE & DIMENSIONS
DESCRIPTION
The Euroquartz range of factory programmable oscillators provide custom
frequency and specification oscillators within very short lead times. The
parts are very reliable in use and have stabilities from ±25ppm over -40°
to 85°C. In addition to the stability over operating temperature range
customers may also choose from supply voltages of 2.7, 3.3 and 5.0
Volts, Enable/Disable or Power Down functions and output synchronous
or asynchronous .
FEATURES
·
·
·
·
·
·
Very quick delivery available
Micro-miniature 5mm x 3.2mm SMD package
Frequency range 1MHz to 160MHz
Ultra low jitter @ 1 million samples
Supply Voltages 2.7 Volts, 3.3 Volts or 5.0 Volts
Enable/Disable or Power Down options
OPERATING LOAD CONDITIONS
GENERAL SPECIFICATION
Package Type:
Frequency Range
5.0 Volt Supply:
3.3 Volt Supply:
2.7 Volt Supply:
Frequency Stability*:
Operating Temperature Range
Choice of three ranges:
Storage Temperature Range:
Ageing:
Packaging:
Output Levels:
Maximum Output Loads
<40MHz:
>40MHz:
Duty Cycle
CMOS <40MHz:
CMOS >40MHz:
Output Clock Rise/Fall Times:
Power Supply Current:
Standby Current:
Start-up Time:
Power Down Delay Time
Synchronous:
Asynchronous:
Output Disable Time
Synchronous:
Asynchronous:
Output Enable Time:
SMD, ceramic, seam-welded lid
1.0MHz to 160.0MHz
1.0MHz to 160.0MHz
1.0MHz to 160.0MHz
±25ppm to ±100ppm
(over operating temperature range)
0° ~ +70°C
Part code: ‘C’
-20° ~ +70°C
Part code: ‘D’
-40° ~ +85°C
Part code: ‘I’
-55° to +125°C
±5ppm/year maximum
(Ta=25°C, Vdd=2.7V, 3.3V or 5.0V)
Bulk pack or tubed
TTL or CMOS
30pF (See note opposite)
15pF (See note opposite)
45/55% maximum
40/60% maximum
4ns maximum
25mA (unloaded)
10mA typical 50mA maximum
10ms maximum (from power-on)
T/2ns typical, T+10ns maximum
10ns typical, 15ns maximum
T/2ns typical, T+10ns maximum
10ns typical, 15ns maximum
(T = frequency period)
100ns maximum
Period Jitter S, 1MHz~133MHz: 8ps typical, 99ps maximum
Period Jitter Peak to Peak
<33.0MHz:
65ps typical, 99ps maximum
33MHz~133MHz:
65ps typical, 80ps maximum
* The frequency stability parameter is an inclusive figure and includes
adjustment tolerance at 25°C, stability over operating temperature
range, variations due to load change ±10%, supply voltage change
±10%, first year ageing, shock and vibration.
Maximum Capacitive Load TTL
5.0 Volt Supply
1.0MHz ~ 40MHz:
40.1MHz ~ 133MHz:
50pF
25pF
Maximum Capacitive Load CMOS
5.0 Volt Supply
1.0MHz ~ 66MHz:
66.1MHz ~ 133MHz:
3.3 Volt/2.7 Volt Supply
1.0MHz ~ 40MHz:
40.1MHz ~ 100MHz:
50pF
25pF
30pF
15pF
PRODUCT SELECTION
Model Number
Frequency
Stability
(ppm)
Operating
Temperature
Range
XOPL53100UC
XOPL53050UC
XOPL53025UC
XOPL53100UD
XOPL53050UD
XOPL53025UD
XOPL53100UI
XOPL53050UI
XOPL53025UI
±100
±50
±25
±100
±50
±25
±100
±50
±25
0°~+70°
0°~+70°
0°~+70°
-20°~+70°
-20°~+70°
-20°~+70°
-40°~+85°
-40°~+85°
-40°~+85°
PART NUMBER GENERATION
Frequency
Model No.
Output
Option
Supply
Voltage
Nominal
Frequency
(MHz)
See table
above
T = Tristate
(Enable/Disable)
P = Power Down
Blank = 5.0 Volts
A=
3.3 Volts
B=
2.7 Volts
EXAMPLE:
24.8920MHz XOPL53050UDTA
Frequency = 24.8920MHz, XOPL53 package, ±50ppm -20°~+70°C,
Tristate, supply voltage 3.3 Volts
SYNCHRONOUS/ASYNCHRONOUS
By default oscillators with Enable/Disable or Power Down functions are
supplied ASYNCHRONOUS. If SYNCHRONOUS operation is required
append ‘SYNC’ to the part number
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 1460 230000 Fax: +44 1460 230001 email: [email protected] web: www.euroquartz.co.uk