FERROXCUBE DATA SHEET RM6S RM, RM/I, RM/ILP cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6S CORE SETS handbook, halfpage Effective core parameters 14.7 SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.863 mm−1 Ve effective volume 840 mm3 Ie effective length 27.3 mm Ae effective area 31.0 mm2 Amin minimum area 23.8 mm2 m mass of set ≈ 5.1 g 8.2 0 −0.6 0 −0.4 2.8 M1.7 >8.4 17.9 0 −0.7 ∅6.4 0 −0.2 10.35 ±0.2 ∅3 +0.1 0 8 2.3 ∅12.4 +0.5 0 +0.4 12.4 ±0.1 0 CBW296 Dimensions in mm. Fig.1 RM6S core set. Core sets for filter applications Clamping force for AL measurements, 40 ±20 N. GRADE 3D3 3H3 TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) µe 63 ±3% ≈ 44 ≈ 850 RM6S-3D3-E63/N RM6S-3D3-E63 100 ±3% ≈ 70 ≈ 460 RM6S-3D3-E100/N RM6S-3D3-E100 160 ±3% ≈ 112 ≈ 250 RM6S-3D3-A160/N RM6S-3D3-A160 950 ±25% ≈ 670 ≈0 − RM6S-3D3 160 ±3% ≈ 112 ≈ 280 RM6S-3H3-A160/N RM6S-3H3-A160 250 ±3% ≈ 175 ≈ 160 RM6S-3H3-A250/N RM6S-3H3-A250 315 ±3% ≈ 221 ≈ 120 RM6S-3H3-A315/N RM6S-3H3-A315 400 ±3% ≈ 280 ≈ 90 RM6S-3H3-A400/N RM6S-3H3-A400 ≈ 1470 ≈0 − RM6S-3H3 2100 ±25% 2008 Sep 01 TOTAL AIR GAP (µm) AL (nH) 1208 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6S INDUCTANCE ADJUSTERS 0.07 O 3.13 0 handbook, halfpage General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C 9.5 3.4 M 1.7 2.4 min 0.7 MGC079 Dimensions in mm. Fig.2 RM6S inductance adjuster. Inductance adjuster selection chart GRADE 3H3 ∆L/L(1) TYPES FOR MEDIUM ∆L/L(1) % ADJUSTMENT % ∆L/L(1) % − − − − ADJ-RM6-GREEN 20 63 − − ADJ-RM6-GREEN 14 ADJ-RM6-RED 22 ADJ-RM6-GREEN 10 ADJ-RM6-RED 16 − − 160 ADJ-RM6-GREEN 6 ADJ-RM6-RED 11 ADJ-RM6-WHITE 19 200 ADJ-RM6-RED 9 ADJ-RM6-WHITE 15 ADJ-RM6-VIOLET 19 250 ADJ-RM6-WHITE 12 ADJ-RM6-VIOLET 14 ADJ-RM6-BROWN 20 315 ADJ-RM6-WHITE 9 ADJ-RM6-BROWN 15 ADJ-RM6-BLACK 23 400 ADJ-RM6-VIOLET 8 ADJ-RM6-BLACK 16 ADJ-RM6-GREY 26 630 ADJ-RM6-BLACK 9 ADJ-RM6-GREY 15 − − 1000 ADJ-RM6-BLACK 5 ADJ-RM6-GREY 9 − − 1250 − − ADJ-RM6-GREY 5 − − 40 − − − − ADJ-RM6-GREEN 19 63 − − ADJ-RM6-GREEN 14 ADJ-RM6-RED 22 100 ADJ-RM6-GREEN 9 ADJ-RM6-RED 15 ADJ-RM6-WHITE 27 160 ADJ-RM6-RED 9 ADJ-RM6-WHITE 16 − − Note 1. Maximum adjustment range. 2008 Sep 01 TYPES FOR HIGH ADJUSTMENT 40 100 3D3 TYPES FOR LOW ADJUSTMENT AL (nH) (applies to all types) 1209 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6S COIL FORMERS General data PARAMETER SPECIFICATION Coil former material phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E167521(M) Pin material copper-tin alloy (CuSn), tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085” , class H Resistance to soldering heat “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 7.8 0 −0.15 12.7 handbook, full pagewidth 7.62 (6.4 min. ) 1.6 0.8 0 −0.1 0.75 0.4 2.54 ∅0.6 2 3 6.5 +0.15 0 0 ∅7.45 0 ∅12.3 −0.2 −0.1 1 8.6 5.7 max. 4 0.4 1.4 min. 5.2 1.0 +0.15 0 CBW612 Dimensions in mm. Fig.3 RM6S coil former; 4-pins. Winding data and area product for 4-pins RM6S coil former NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) 1 4 all 15 6.4 30 465 CSV-RM6S/R-1S-4P 2 4 all 2 × 7.0 2 × 3.0 30 2 x 217 CSV-RM6S/R-2S-4P 2008 Sep 01 1210 TYPE NUMBER Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6S General data PARAMETER SPECIFICATION Coil former material unsaturated polyester (UP), glass-reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E61040 (M) Solder pad material copper-tin alloy CuSn), tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085”, class H Resistance to soldering heat “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 7.85 0.8 0 −0.1 6.26 min. 12.7 7.62 0.87 0.52 3 0.45 4 ∅ 0.5 handbook, full pagewidth 5 ∅12.3 −0.2 6.5 +0.15 ∅ 7.45 ±0.2 1 +0.15 2 8.5 1 6 5 0.7 min. CBW516 2.54 Dimensions in mm. Fig.4 Coil former for RM6S; 6-pins. Winding data and area product for RM6S coil former AVERAGE AREA WINDING LENGTH OF PRODUCT WIDTH TURN Ae x Aw (mm) (mm) (mm4) NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED WINDING AREA (mm2) 1 6 all 15.0 6.3 30.0 465 CSV-RM6S-1S-6P-G(1) 1 5 1, 2, 3, 5, 6 15.0 6.3 30.0 465 CSV-RM6S-1S-5P-G(1) 1 4 2, 3, 5, 6 15.0 6.3 30.0 465 CSV-RM6S-1S-4P-G(1) 2 6 all 2 × 7.0 2×3 30.0 2 x 217 CSV-RM6S-2S-6P-G(1) Note 1. Also available with post-inserted pins. 2008 Sep 01 1211 TYPE NUMBER Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6S General data PARAMETER SPECIFICATION Coil former material unsaturated polyester (UP), glass-reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E61040 (M) Solder pad material copper-clad steel, tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085”, class H Resistance to soldering heat “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1 7.85 −0.1 6.26 min. 0.87 0.52 12.7 7.62 0.8 1 +0.15 handbook, full pagewidth ∅12.3 −0.2 ∅7.45 −0.1 ∅0.5 CBW515 0.65 min. 6.5 +0.05 5 2.54 8.4 min. Dimensions in mm. Fig.5 Coil former for RM6S; 8-pins. Winding data and area product for RM6S coil former NUMBER OF SECTIONS NUMBER OF PINS WINDING AREA (mm2) WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) 1 8 14.5 6.26 30.7 450 2008 Sep 01 1212 TYPE NUMBER CSV-RM6S-1S-8P Ferroxcube RM, RM/I, RM/ILP cores and accessories MOUNTING PARTS handbook, halfpage General data ITEM RM6S 2.3 1.6 SPECIFICATION Clamping force ≈20 N Clip material steel Clip plating silver (Ag) Solderability “IEC 60 068-2-20”, Part 2, Test Ta, method 1 Type number CLI/P-RM6 12 4.5 0.7 MGC082 Dimensions in mm. Fig.6 Mounting clip for RM6S. 2008 Sep 01 1213 9.8 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6S DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 1214