MINIATURE RELAY (SURFACE MOUNT TYPE) 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) NAS SERIES ■ FEATURES ● ● ● ● ● ● ● ● 2 form C small size, surface mounting relay Slim type relay for high density mounting Conforms to Bellcore specification and FCC part 68 —Dielectric strength 1,500 VAC between coil and contacts —Surge strength 2,500 V between coil and contacts (at 2 × 10 µs surge wave) UL, CSA recognized High sensitivity and low consumption power —Operating power: 60 to 70 mW —Nominal power: 100 to 300 mW High reliability—bifurcated contacts DIL pitch terminals Plastic sealed type NO TF DE ■ ORDERING INFORMATION [Example] (a) NAS L – D (a) (b) (*) (c) Series Name 12 W (d) (e) – SI OR K B 05 (f ) (g) (h) NAS : NAS Series NE (b) Operation Function (c) Number of Coil (d) Nominal Voltage Refer to the COIL DATA CHART (e) Contact W GN (f ) Enclosure K : Plastic sealed type (g) Packaging Orientation B : Standard type (h) Packaging Quantity 05 : 500 pieces Nil L Nil D : Standard type : Latching type : Single winding type : Double winding type : Bifurcated type S W Note: Actual marking omits the hyphen (-) of (*) ■ SAFETY STANDARD AND FILE NUMBERS UL478, 508, 1950 (File No. E45026) C22.2 No. 14 (File No. LR35579) Only UL/CSA approval markings are marked on the cover. Nominal voltage 1.5 to 48 VDC Contact rating 0.5 A 2A 0.3 A 125 VAC 30 VDC 110 VDC resistive 1 NAS SERIES ■ SPECIFICATIONS Standard Type Item Single Winding Latching Type Double Winding Latching Type NAS-( ) W-K Contact Arrangement 2 form C (DPDT) Material Gold overlay silver alloy Style Bifurcated Resistance (initial) Maximum 50 mΩ (at 1 A 6 VDC) Rating (resistive) 0.5 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2A Maximum Switching Power 62.5 AV, 30 W Maximum Switching Voltage 250 VAC, 220 VDC NO Maximum Switching Current Minimum Switching Capacitance (at 1 kHz) Coil Time Value Insulation Other Load*1 NASL-D ( ) W-K 2A 0.01 mA 10 mVDC Approximately 0.5 pF (between open contacts, adjacent contacts) Approximately 1.0 pF (between coil and contacts) TF Nominal Power (at 20°C) 0.14 to 0.3 W 0.1 to 0.15 W 0.20 to 0.3 W Operate Power (at 20°C) 0.08 to 0.17 W 0.06 to 0.085 W 0.115 to 0.17 W Operating Temperature –40°C to +85°C (no frost)(refer to the CHARACTERISTING DATA) Operate (at nominal voltage) Maximum 6 ms Maximum 6 ms (set) Release (at nominal voltage) DE Maximum 4 ms Maximum 6 ms (reset) Resistance (at 500 VDC) Minimum 1,000 MΩ between open contacts Dielectric Strength between adjacent contacts between coil and contacts 1,000 VAC 1 minute Surge Strength Life NASL-( ) W-K SI OR 1,000 VAC 1 minute 1,500 VAC 1 minute 1,000 VAC 1 minute GN between open contacts 1,500 V (at 10 × 700 µs) between adjacent contacts 1,500 V (at 10 × 700 µs) between coil and contacts 2,500 V (at 2 × 10 µs) NE W 1,500 V (at 10 × 160 µs) S Mechanical 1 × 108 operations minimum 1 × 107 operations minimum Electrical 2 × 105 ops. min. (0.5 A 125 VAC), 5 × 105 ops. min. (1 A 30 VDC) Misoperation Vibration Resistance Endurance 10 to 55 Hz (double amplitude of 3.3 mm) Misoperation Shock Resistance Endurance 500 m/s2 (11 ±1 ms) Weight Approximately 1.8 g 10 to 55 Hz (double amplitude of 5.0 mm) 1,000 m/s2 ( 6 ±1 ms) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 NAS SERIES Standard Type ■ COIL DATA CHART MODEL Nominal voltage Coil resistance (±10%) Must operate voltage*1 Must release voltage*1 Nominal power NAS-1.5 W-K 1.5 VDC 16.1Ω +1.13 VDC +0.15 VDC 140 mW NAS- 3 W-K 3 VDC 64.3Ω +2.25 VDC +0.3 VDC 140 mW NAS-4.5 W-K 4.5 VDC 145Ω +3.38 VDC +0.45 VDC 140 mW NAS- 5 W-K 5 VDC 178Ω +3.75 VDC +0.5 VDC 140 mW NAS- 6 W-K 6 VDC 257Ω +4.5 VDC +0.6 VDC 140 mW NAS- 9 W-K 9 VDC 579Ω +6.75 VDC +0.9 VDC 140 mW NAS- 12 W-K 12 VDC 1,028Ω +9.0 VDC +1.2 VDC 140 mW NAS- 18 W-K 18 VDC 1,620Ω +13.5 VDC +1.8 VDC 200 mW NAS- 24 W-K 24 VDC 2,880Ω +18.0 VDC +2.4 VDC 200 mW NAS- 48 W-K 48 VDC 7,680Ω +36.0 VDC +4.8 VDC 300 mW Set voltage*1 Reset voltage*1 Nominal power *1 NO Note: Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. Nominal voltage Single Winding Latching Type MODEL Coil resistance (±10%) TF NASL-1.5 W-K 1.5 VDC 22.5Ω +1.13 VDC –1.13 VDC 100 mW NASL- 3 W-K 3 VDC 90Ω +2.25 VDC –2.25 VDC 100 mW NASL-4.5 W-K 4.5 VDC 203Ω +3.38 VDC –3.38 VDC 100 mW NASL- 5 W-K 5 VDC 250Ω +3.75 VDC –3.75 VDC 100 mW NASL- 6 W-K 6 VDC 360Ω +4.5 VDC –4.5 VDC 100 mW NASL- 9 W-K 9 VDC 810Ω +6.75 VDC –6.75 VDC 100 mW NASL- 12 W-K 12 VDC 1,440Ω +9.0 VDC NASL- 18 W-K 18 VDC 2,160Ω +13.5 VDC 3,840Ω +18.0 VDC P 11.25Ω +1.13 VDC DE NASL- 24 W-K 24 VDC NASL-D1.5 W-K 1.5 VDC SI OR GN S 11.25Ω NASL-D 3 W-K 3 VDC P Double Winding Latching Type S NASL-D4.5 W-K 4.5 VDC P S NASL-D 5 W-K NASL-D 6 W-K NASL-D 9 W-K NASL-D 12 W-K NASL-D 18 W-K 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC P 45Ω 101Ω 125Ω S 125Ω P 180Ω S 180Ω P 405Ω S 405Ω P 720Ω S 720Ω P 1,080Ω +2.25 VDC 24 VDC P 1,920Ω S 1,920Ω Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. –18.0 VDC 150 mW NE +2.25 VDC +3.38 VDC S +3.38 VDC +3.75 VDC +3.75 VDC +4.5 VDC +4.5 VDC +6.75 VDC +6.75 VDC +9.0 VDC +9.0 VDC +13.5 VDC S 1,080Ω NASL-D 24 W-K 100 mW 150 mW +1.13 VDC 45Ω 101Ω –9.0 VDC –13.5 VDC +13.5 VDC +18.0 VDC +18.0 VDC 200 mW W 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 300 mW 300 mW P: Primary coil S: Secondary coil 3 NAS SERIES ■ DIMENSIONS ● Dimensions ● Schematics (top view) NAS, NASL type (Non-latching type, single winding latching type ● PC board mounting pad layout (top view) (Top NASL-D type (Double winding latching type) NO TF DE SI OR ■ RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) GN Unit: mm NE S Note: W 1. Temperature profiles show the temperature of PC board surface. 2. Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. 4 NAS SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: [email protected] www.fcal.fujitsu.com © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 NO TF DE SI OR GN NE S W 5