Velociti™ Series MM0-6SF Multi-MOD Six Signal Output Module Description The FCI Velociti™ Series, multi-mod six signal output module (MMO-6SF) provides six (6), Style Y (Class B) or three (3), Style Z (Class A) supervised control circuits suitable for a wide range of signaling applications. Each supervised circuit may be used as a: • Audio speaker circuit. • Notification applicance circuit. • Supervised control output. The VelocitiTM Series use a communication protocol that substantially increases the speed of communication between the sensors and certain FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs. The MMO-6SF connects to the signaling line circuits (SLC) of the FCI analog addressable series fire alarm control panels. Each of the MMO-6SF supervised control circuits occupies its own address on the system’s SLC allowing each to be fully programmable in its control-by-event sequence of operation. The address of the first supervised output circuit is set with a pair of rotary dials. Each remaining circuit is automatically assigned to its own subsequent address. The MMO-6SF module includes an address disable jumper matrix that allows one, two, or three addresses to be turned off to free these addresses for other purposes. An additional jumper setting selects either Style Y or Style Z circuit configurations. A wide range of configurations are possible including 30 VDC, audio input at 25 or 70.7 VRMS, 125 VAC, etc. More than one circuit can share a power supply if the current capacity does not exceed the power supply’s output. MMO-6SF Features • Each MMO-6SF module provides six (6), Style Y • • • • • • • • • • • (Class B) or three (3), Style Z (Class A) individually addressable, individually programmable notification appliance or supervised output circuits. Removable wiring terminal blocks allow ease of installation and servicing. Terminal blocks can accommodate 12 to 18 AWG wire. Flexible jumper configuration feature allowing up to three (3), output circuit addresses to be disabled. Accommodates multiple external power inputs. External power monitoring. Short circuit protection of external power supplies. Sources providing AC, DC, or audio inputs. Designed for use with FCI analog addressable series fire alarm control panels. Individual LED indicators*. Ideal for retrofit applications. Two (2), mounting cabinets available for two (2), (MBB-2 cabinet) to six (6), (MBB-6 cabinet) units. Note: *Only the red LED is operative in panels that do not operate in Velociti™ mode. An ISO 9001-2000 Company Velociti™ and E3 Series™ are trademarks of Fire Control Instruments. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0634 Rev. C page 1 of 2 ©2006 Gamewell-FCI. All rights reserved. Description (continued) Specifications Each output circuit on the MMO-6SF monitors its own connection to its power supply and will indicate a fault condition by address if the power source should fail. The MMO-6SF is also provided with short circuit monitoring to protect the external power source from short circuits on the notification appliance circuit wiring. This feature can be disabled per individual circuit if the application requires. Operating Voltage: Stand-by Current: Alarm Current: Maximum IDC Wire Resistance: Temperature Range: Humidity: Dimensions: (Note: power supply monitoring must also be disabled in such cases.) MBB-2 Each circuit has its own status LED that flashes to indicate proper polling and lights steadily when the output has been activated. Two (2), multi-mod series units can be mounted in one MBB-2 cabinet. Additional mounting options include the MCH-6 chassis that can accommodate six multi-mod series modules. The MCH-6 chassis can be installed in a custom cabinet or can be mounted in the MBB-6 cabinet allowing up to six (6), multi-mod series modules in one cabinet. The MMO-6SF is ideal for applications where centralized location of circuits is required. As many as thirty-six (36), supervised output circuits may be located in a cabinet that is only 12.63” H x 24” W x 6.5” D in dimension saving valuable wall space in mechanical rooms and electrical closets and reducing cost of installation. MBB-6 External Supply Voltage DC Voltage: Ripple Voltage: Current: 15-32 VDC 2.25 mA 40 mA (with all six LEDs lit) 25 Ohms 32˚ F to 120˚ F (0˚ to 49˚ C) 10 to 85% (non-condensing) 6.8” H x 5.8” W x 1.25” D (17.3 x 14.7 x 3.2 cm) 12.25” H x 9.25” W x 3.32” D (31.1 x 23.5 x 8.4 cm) 12.63” H x 24” W x 6.5” D (32 x 60.1 x 16.5 cm) 18-28 Volts, Power-limited 0.1 Volts rms maximum 90 mA per Module Contact Ratings Current Rating 3A 2A 1A Maximum Voltage 30 VDC 30 VDC 30 VDC 0.5A 30 VDC 0.9A 0.9A 0.7A 110 VDC 125 VAC 70.7 & VAC 0.5A 125 VAC Load Description Resistive Resistive Inductive (L/R= 2ms) Inductive (L/R= 5ms) Resistive Resistive Inductive (PF= 0.35) Inductive (PF= 0.35) Application Non-coded Coded Coded Coded Non-coded Non-coded Non-coded Non-coded Ordering Information Model Description MMO-6SF MBB-2 MBB-6 MCH-6 Multi-Mod 6 zone interface module Backbox, 2 unit Backbox, 6 unit, requires MCH-6 6-Unit mounting chassis GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118 www.gamewell-fci.com 9020-0634 Rev. C page 2 of 2