® SpectrAlert SP2C Series Ceiling-Mount Speaker/Strobes Description System Sensor’s SP2C Series Speaker/Strobes combine leading-edge strobe and speaker technology with a design specifically intended for ceilingmount applications. Technology — SpectrAlert® SP2C ceiling speaker/strobes combine the low current draw of the ceilingmount SpectrAlert® strobes, with the intelligible, fidelity sound quality of the SpectrAlert® SP200 Series evacuation speaker. Flexibility — Like all SpectrAlert® products, the SP2C Series ceiling speaker/ strobes feature the flexibility to meet a wide variety of applications. The 24-volt strobe is available in six different candelas, including 177 candela for sleeping areas. The speaker offers field-selectable 25.0/70.7 voltage and 1/4, 1/2, 1, and 2 watt power taps. Aesthetics — The SP2C Series ceiling speaker/strobes offer a design that is sensitive to the aesthetic demands of ceiling-mount applications. The round shape maintains a low-profile appearance, similar to that of a smoke detector. Its stylish curves and design further refine the aesthetics over other generic wall/ceiling-mount designs. Yet SpectrAlert®’s round shape provides clearly visible “FIRE” identification from all angles. Installation — The SP2C Series ceiling speaker/strobes include several features to simplify installation. By incorporating the SP200 Series speaker, the entire unit may be mounted to a standard 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm) backbox without an extension ring. An optional backbox skirt is also available for surface-mount applications. With SpectrAlert®’s round shape, aligning the backbox with the room’s walls is not necessary — SpectrAlert® always lines up. Engineer’s Specifications Ceiling speaker/strobe shall be a System Sensor Model ________ listed to UL 1480 and UL 1971 and be approved for fire protective signaling systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal VRMS, and shall have a frequency range of 400 to 4,000 Hz. Speaker shall have power taps which are selected by shunts. The strobe shall comply with the NFPA 72 requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system SpectrAlert® is a registered trademark and Sync•Circuit™ is a trademark of System Sensor. SpectrAlert® SP2C Series CS-2453 10/21/04 Page 1 of 2 Features • Combines SpectrAlert® ceilingmount strobe and speaker technologies for low current draw, fidelity sound quality. • 24 VDC models available with 15, 15/75, 30, 75, 95, 115, and 177 candela strobes. • 25.0 and 70.7 volt speaker with four field-selectable power taps. • Ceiling-specific shape, profile, and aesthetics. • Strobe is synchronizable with MDL Sync•Circuit™ module. • Mounts to a 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm) backbox without an extension ring. • Round shape offers greater placement flexibility. Listings Listings and approvals below apply to the basic SpectAlert® SP2C Series Celing-Mount Speaker/Strobes. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL Listed: file S4048. • CSFM approved: file 73201209:200. • MEA approved: file 63-00-E (15, 15/75, 30, 75, 95 cd models), 218-00-E (115, 177 cd models). Ordering Information with Current Draw Description Model No. (White) Ceiling Speaker SP2C2415 /Strobes SP2C241575 Surface-mount back box skirt Candela FWR Max. Operating Strobe Current (mA RMS) DC Max. Operating Strobe Current (mA RMS) 15 68 64 15/75 77 78 SP2C2430 30 107 113 SP2C2475 75 197 205 SP2C2495 95 239 274 SP2C24115 115 298 325 SP2C24177 177 399 489 Specifications GENERAL Dimensions 6.8" (172.72 mm) diameter. Mounting 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm) backbox. Indoor operating temperature 32°F to 120°F (0°C to 49°C). STROBES Strobe operating voltage 24 VDC and FWR unfiltered. BBSCW BBSCW Surface-Mount Backbox Skirt Input terminals 12 to 18 AWG (3.25 to 0.75 mm²). 6797bbsc.jpg Mounting Speaker/Strobe with accessory Backbox Skirt Operating voltage range 24 volts, 16 – 33 volts. Operating voltage range with Sync•Circuit™ module 24 volts, 17 – 33 volts. SPEAKERS Input voltage 25.0 or 70.7 volts (nominal). Input terminals 12 to 18 AWG (3.25 to 0.75 mm²). Standard Speaker/Strobe Mounting Frequency range 400 – 4,000 Hz. NOTE: The SP2C Series is UL listed from 400 to 4,000 Hz, but will provide an output from 100 to 10,000 Hz. Power taps 1/4, 1/2, 1, and 2 watts. SOUND OUTPUT 6797mt1.wmf 6797mt2.wmf dBA @ 10 Ft. Ul Reverberant* 2 W 1 W 1/2 W 1/4 W 84 81 78 UL Anechoic 87 84 81 *Assumes flush-mount installation Gamewell 12 Clintonville Road Northford, CT 06472-1610 Phone: 203-484-7161 Fax: 203-484-7118 www.gamewell.com A Honeywell Company © 2004 Gamewell 75 78 Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell assumes no responsibility for their use. Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation. For more information, contact Gamewell. Page 2 of 2 SpectrAlert® SP2C Series CS-2453 10/21/04