® SpectrAlert Features • Chime meets UL 464 requirements for private mode. Chimes and Chime/Strobes • Strobe meets UL 1971 requirements. • Field-selectable tones: Description CH24MC 6945pho2.jpg – Repeating 1-second chime. System Sensor ’s SpectrAlert® wallmount electronic chimes and chime/ strobes offer sixteen different field-selectable chime tones, each with three volume settings. Intended for private-mode applications, the SpectrAlert® chime meets UL 464 and the chime/strobe meets UL1971. – Repeating 1/4-second chime. Flexibility. SpectrAlert® products offer the flexibility to meet a broad range of requirements. SpectrAlert® chimes and chime/strobes feature sixteen field-selectable electronic tones, with three different volume levels for each. Chime/ strobe models are available in 15, 15/ 75, 75, and 110 candela configurations. – Temporal 3 / 3 kHz. Installation. SpectrAlert® chimes and chime/strobes offer DIP switch tone selections to simplify field configuration. In addition, each device mounts to standard-depth backboxes for greater installation flexibility. Small-footprint or surface-mount accessory mounting plates are available for the chime. Aesthetics. SpectrAlert® chimes and chime/strobes incorporate the same stylish, low-profile design of other SpectrAlert® wall-mount products, and are available in red and white to meet specific installation reCH12/24 quirements. SpectrAlert® and Sync•Circuit™ are trademarks of 6945pho1.jpg System Sensor. – Temporal 3 chime. – Single-stroke chime. – Continuous / 3 kHz. – Continuous / 500 Hz. – Temporal 3 / 500 kHz. • Three volume options. • Mount to standard backboxes. • Models available in red or white. Listings Listings and approvals below apply to the SpectrAlert® Chimes and Chime/Strobes. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. Engineer’s Specifications • UL Listed: file S4011. Electronic chime and chime/strobe shall be a System Sensor SpectrAlert® model ______. The chime shall be Listed to UL 464 for fire protective signaling systems and shall perform in accordance with private mode emergency and general utility signaling. The strobe shall be listed to UL1971 and shall be approved for fire protective signaling. The strobe shall comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The chime shall have sixteen field-selectable tone options, each with three volume settings. These options shall be activated through the appropriate settings on a DIP switch located on the rear of the unit. The chime shall be capable of mounting to a standard 4" x 4" (10.16 x 10.16 cm) x 1.5" (3.81 cm) backbox, or a single-gang 2" (5.08 cm) x 4" (10.16 cm) x 1.875" (4.763 cm) backbox. The chime/ strobe shall be capable of mounting to a standard 4" x 4" (10.16 x 10.16 cm) x 1.5" (3.81 cm) backbox. The chime shall operate at 12 or 24 volts and the chime/strobe shall operate at 24 volts. Both chime and chime/strobe shall be powered from a noncoded power supply and shall be capable of operating from either a regulated DC or full-wave rectified, unfiltered power supply. Chime and chime/strobe shall have an operating temperature range of 32°F to 120°F (0°C to 49°C). • MEA approved: file 291-01-E, 397-00-E (CH1224W). SpectrAlert® Chime & Chime Strobes CS-2450 10/21/04 Page 1 of 2 • CSFM approved: file 71351209:216, 7135-1209:206 (CH1224W). Ordering Information Specifications Description Red White CH24MCW Candela Voltage 15, 15/75, 30, 75, 110 24 12 to 18 AWG (3.25 mm² to 0.51 mm²). Chime/Strobe CH24MC Surface Mount Backbox Skirt BBS-CHSR BBS-CHSW N/A N/A Chime only CH1224 CH1224W N/A 12/24 Small Footprint Mounting Plate S-MP S-MPW N/A N/A Surface Mount Back Box Skirt BBS-CHSR BBS-CHSW N/A N/A Universal Mounting Plate (Replacement) D-MP N/A N/A D-MPW Dimensions Chime with mounting plate: 5.00" (12.7 cm) high x 5.625" (14.288 cm) wide x 2.25" (5.715cm) deep. Chime with small-footprint plate: 3.375" (8.573 cm) wide x 5.625" (14.288 cm) high x 2.938" (7.461 cm) deep. Chime/strobe: 5.00" (12.7 cm) high x 6.938" (17.621 cm) wide x 2.438" (6.191 cm) deep. Electronic Chime Current Draw, 8-33 VDC: 10-61 mA Mounting High 56 57 61 52 59 61 64 52 54 54 57 60 57 60 62 0.8 K Repeating 1-Seco nd Chime 47 47 53 49 51 52 53 55 58 55 58 60 1.2 K Repeating 1/4 Seco nd Chime 53 54 58 55 57 59 59 61 64 61 63 66 1.0 K Repeating 1/4 Seco nd Chime 49 50 54 51 53 54 55 57 60 57 59 62 0.8 K Repeating 1/4 Seco nd Chime 48 50 53 50 52 53 54 56 59 56 58 61 1.2 K Tempo ral Chime 51 52 56 52 54 55 55 57 61 58 60 63 Med 54 51 Low 53 54 Med 55 50 Low 52 48 Med 51 1.0 K Repeating 1-Seco nd Chime Med 1.2 K Repeating 1-Seco nd Chime Low High 33 Volts Low 24 Volts High 12 Volts High 8 Volts Tone Input terminals Chime: single-gang or 4" x 4" (10.16 x 10.16 cm) backbox. Chime/strobe: 4" x 4" (10.16 x 10.16 cm) backbox. Weight Chime:0.5 lb. (226.8 g). Chime/strobe: 1.5 lb. (680.4 g). Operating temperature,indoor 32°F to 120°F (0°C to 49°C). 1.0 K Tempo ral Chime 48 49 54 49 51 51 53 55 58 55 57 60 Maximum humidity 0.8 K Tempo ral Chime 46 47 51 48 50 51 52 54 57 54 56 59 93% (± 2%) RH. 1.2 K Single-Stro ke Chime 52 53 58 52 54 56 56 58 62 58 60 64 1.0 K Single-Stro ke Chime 47 48 53 50 51 59 53 55 58 56 58 62 0.8 K Single-Stro ke Chime 47 48 53 49 50 52 54 56 60 56 59 61 Chime: 12 or 24 VDC and FWR unfiltered.* 3.0 K Co ntinuo us Electromechanical 56 57 61 59 60 67 65 68 70 68 70 74 Chime/strobe: 24 VDC and FWR unfiltered.* 3.0 K Tempo ral Electro mechanical 51 52 56 53 54 61 56 59 62 58 60 64 0.5 Co ntinuo us Electromechanical 48 49 53 51 52 56 54 57 60 56 55 61 05 K Tempo ral Electro mechanical 45 47 51 47 49 53 51 52 58 52 54 60 Voltages, nominal Operating voltage range:* Chime: 8 – 33 V. Chime/strobe: 16 – 33 V. Strobe Current Draw Sound Output Note: Factory default setting is 1.0 K Repeating 1Second Chiime set at High Volume. Model No. Candela Setting FWR Operating Current-Strobe (m A RMS) DC Operating Current-Strobe (mA RMS) CH24MC Chime/Strobe A Honeywell Company © 2004 Gamewell Sound output, UL reverberant, factory defaults: 15 64 59 15/75 74 69 30 93 90 At 24 VDC: 60 dBA. 75 158 160 110 208 209 Factory default settings are 1.0K repeating 1-second chime at high volume. Refer to table on page 2 for levels for each tone selection. *Average current draw varies with tones selected. Current ratings per System Sensor testing at 12 VDC and 24 VDC. Add current values when connecting in parallel. Gamewell 12 Clintonville Road Northford, CT 06472-1610 Phone: 203-484-7161 Fax: 203-484-7118 www.gamewell.com *Must be powered with a non-coded power supply. At 12 VDC: 54 dBA. U.S. Patent Numbers 5,593,569. 5,914,665. 5,850,178. 5,598,139. 6,049,446. 6,127,935. Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell assumes no responsibility for their use. Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation. For more information, contact Gamewell. Page 2 of 2 SpectrAlert® CS-2450 10/21/04