GOOD-ARK 5KP20A

5KP5.0 thru 5KP250CA
Transient Voltage Suppressors
Peak Pulse Power 5000W Stand-off Voltage 5.0 to 250V
Features
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Glass passivated junction
5000W peak pulse power capability with a 10/1000ms
waveform, repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response time: theoretically (with no parisitic inductance)
less than 1ps from 0 Volts to V(BR) for unidirectional and 5ns for
bidirectional types.
Devices with V(BR) > 10V ID are typically ID less than 1.0mA
High temperature soldering guaranteed:
265oC/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
Mechanical Data
Case: Molded plastic body over glass passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: The color band denotes the cathode, which is positive
with respect to the anode under normal TVS operation
Mounting Position: Any
Weight: 0.07 ounce, 2.1 grams
Devices for Bidirectional Applications
For bi-directional, use C or CA suffix for types 5KP5.0 thru types 5KP110A (e.g. 5KP5.0C, 1.5KP5.0CA). Electrical
characteristics apply in both directions.
Maximum Ratings and Thermal Characteristics
Ratings at 25oC ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
Peak pulse power dissipation with a 10/1000us waveform (1)
P PPM
Minimum 5000
W
Peak pulse current with a 10/1000us waveform (1)
IPPM
See Next Table
A
PM(AV)
8.0
W
IFSM
500
Amps
VF
3.5
Volts
TJ, TSTG
-55 to +175
Steady state power dissipation
at TL=75oC, lead lengths 0.375" (9.5mm) (2)
Peak forward surge current, 8.3ms single half sine-wave
Instantaneous forward voltage at 100A
(3)
Operating junction and storage temperature range
Notes:
(3)
o
C
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2
2. Mounted on copper pad area of 1.6 x 1.6" (40 x 40 mm) per Fig. 5.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
610
Electrical Characteristics
(TA=25oC unless otherwise noted.)
Breakdow n voltage
V(BR)
(Volts) (1)
Stand-off
voltage
VWM
(Volts)
Maximum
reverse
leakage
at VWM
ID
(uA)
Maximum
peak pulse
current
IPPM(2)
(A)
Maximum
clamping
voltage
at IPPM
VC (Volts)
Maximum
temperature
coefficient
of V(BR)
(% / oC)
Device type
Min.
Max.
Test
current
at IT
(mA)
5KP5.0
6.40
7.30
50
5.0
2000
521
9.6
0.057
5KP5.0A
6.40
7.00
50
5.0
2000
543
9.2
0.057
5KP6.0
6.67
8.15
50
6.0
5000
439
11.4
0.061
5KP6.0A
6.67
7.37
50
6.0
5000
485
10.3
0.061
5KP6.5
7.22
8.82
50
6.5
2000
407
12.3
0.065
5KP6.5A
7.22
7.98
50
6.5
2000
446
11.2
0.065
5KP7.0
7.78
9.51
50
7.0
1000
376
13.3
0.068
5KP7.0A
7.78
8.60
50
7.0
1000
417
12.0
0.068
5KP7.5
8.33
10.2
5.0
7.5
250
350
14.3
0.073
5KP7.5A
8.33
9.21
5.0
7.5
250
388
12.9
0.073
5KP8.0
8.89
10.9
5.0
8.0
150
333
15.0
0.075
5KP8.0A
8.89
9.83
5.0
8.0
150
368
13.6
0.075
5KP8.5
9.44
11.5
5.0
8.5
50
314
15.9
0.078
5KP8.5A
9.44
10.4
5.0
8.5
50
347
14.4
0.078
5KP9.0
10.0
12.2
5.0
9.0
20
296
16.9
0.081
5KP9.0A
10.0
11.1
5.0
9.0
20
325
15.4
0.081
5K P 10
11.1
13.6
5.0
10.0
15
266
18.8
0.084
5K P 10A
11.1
12.3
5.0
10.0
15
294
17.0
0.084
5KP11
12.2
14.9
5.0
11.0
10
249
20.1
0.086
5KP11A
12.2
13.5
5.0
11.0
10
275
18.2
0.086
5K P 12
13.3
16.3
5.0
12.0
5.0
227
22.0
0.088
5K P 12A
13.3
14.7
5.0
12.0
5.0
251
19.9
0.088
5K P 13
14.4
17.6
5.0
13.0
2.0
210
23.8
0.090
5K P 13A
14.4
15.9
5.0
13.0
2.0
233
21.5
0.090
5K P 14
15.6
19.1
5.0
14.0
2.0
194
25.8
0.092
5K P 14A
15.6
17.2
5.0
14.0
2.0
216
23.2
0.092
5K P 15
16.7
20.4
5.0
15.0
2.0
186
26.9
0.094
5K P 15A
16.7
18.5
5.0
15.0
2.0
205
24.4
0.094
5K P 16
17.8
21.8
5.0
16.0
2.0
174
28.8
0.096
5K P 16A
17.8
19.7
5.0
16.0
2.0
192
26.0
0.096
5K P 17
18.9
23.1
5.0
17.0
2.0
164
30.5
0.097
5K P 17A
18.9
20.9
5.0
17.0
2.0
181
27.6
0.097
5K P 18
20.0
24.4
5.0
18.0
2.0
155
32.2
0.098
5K P 18A
20.0
22.1
5.0
18.0
2.0
171
29.2
0.098
5K P 20
22.2
27.1
5.0
20.0
2.0
140
35.8
0.099
5K P 20A
22.2
24.5
5.0
20.0
2.0
154
32.4
0.099
5K P 22
24.4
29.8
5.0
22.0
2.0
127
39.4
0.100
5K P 22A
24.4
26.9
5.0
22.0
2.0
141
35.5
0.100
5K P 24
26.7
32.6
5.0
24.0
2.0
116
43.0
0.101
5K P 24A
26.7
29.5
5.0
24.0
2.0
129
38.9
0.101
5K P 26
28.9
35.3
5.0
26.0
2.0
107
46.6
0.101
5K P 26A
28.9
31.9
5.0
26.0
2.0
119
42.1
0.101
5K P 28
31.1
38.0
5.0
28.0
2.0
100
50.0
0.102
5K P 28A
31.1
34.4
5.0
28.0
2.0
110
45.4
0.102
5K P 30
33.3
40.7
5.0
30.0
2.0
93.5
53.5
0.103
5K P 30A
33.3
36.8
5.0
30.0
2.0
103
48.4
0.103
611
Electrical Characteristics
(TA=25oC unless otherwise noted.)
Breakdow n voltage
V(BR)
(Volts) (1)
Stand-off
voltage
VWM
(Volts)
Maximum
reverse
leakage
at VWM
ID
(uA)
Maximum
peak pulse
current
IPPM(2)
(A)
Maximum
clamping
voltage
at IPPM
VC
(Volts)
Maximum
temperature
coefficient
of V(BR)
(% / oC)
Device type
Min.
Max.
Test
current
at IT
(mA)
5K P 33
36.7
44.9
5.0
33.0
2.0
84.7
59.0
0.104
5K P 33A
36.7
40.6
5.0
33.0
2.0
93.8
53.3
0.104
5K P 36
40.0
48.9
5.0
36.0
2.0
77.8
64.3
0.104
5K P 36A
40.0
44.2
5.0
36.0
2.0
86.1
58.1
0.104
5K P 40
44.4
54.3
5.0
40.0
2.0
70.0
71.4
0.105
5K P 40A
44.4
49.1
5.0
40.0
2.0
77.5
64.5
0.105
5K P 43
47.8
58.4
5.0
43.0
2.0
65.2
76.7
0.105
5K P 43A
47.8
52.8
5.0
43.0
2.0
72.0
69.4
0.105
0.106
5K P 45
50.0
61.1
5.0
45.0
2.0
62.3
80.3
5K P 45A
50.0
55.3
5.0
45.0
2.0
68.8
72.7
0.106
5K P 48
53.3
65.2
5.0
48.0
2.0
58.5
85.5
0.106
5K P 48A
53.3
58.9
5.0
48.0
2.0
64.6
77.4
0.106
5K P 51
56.7
69.3
5.0
51.0
2.0
54.9
91.1
0.107
5K P 51A
56.7
62.7
5.0
51.0
2.0
60.7
82.4
0.107
5K P 54
60.0
73.3
5.0
54.0
2.0
51.9
96.3
0.107
5K P 54A
60.0
66.3
5.0
54.0
2.0
57.4
87.1
0.107
5K P 58
64.4
78.7
5.0
58.0
2.0
48.5
103
0.107
5K P 58A
64.4
71.2
5.0
58.0
2.0
53.4
94
0.107
5K P 60
66.7
81.5
5.0
60.0
2.0
46.7
107
0.108
5K P 60A
66.7
73.7
5.0
60.0
2.0
51.7
97
0.108
5K P 64
71.1
86.9
5.0
64.0
2.0
43.9
114
0.108
5K P 64A
71.1
78.6
5.0
64.0
2.0
48.5
103
0.108
5K P 70
77.8
95.1
5.0
70.0
2.0
40.0
125
0.108
5K P 70A
77.8
86.0
5.0
70.0
2.0
44.2
113
0.108
5K P 75
83.3
102
5.0
75.0
2.0
37.3
134
0.108
5K P 75A
83.3
92.1
5.0
75.0
2.0
41.3
121
0.108
0.108
5K P 78
86.7
106
5.0
78.0
2.0
36.0
139
5K P 78A
86.7
95.8
5.0
78.0
2.0
39.7
126
0.108
5K P 85
94.4
115
5.0
85.0
2.0
33.1
151
0.108
5K P 85A
94.4
104
5.0
85.0
2.0
36.5
137
0.110
5K P 90
100
122
5.0
90.0
2.0
31.3
160
0.110
5K P 90A
100
111
5.0
90.0
2.0
34.2
146
0.110
5K P 100
111
136
5.0
100
2.0
27.9
179
0.110
5K P 100A
111
123
5.0
100
2.0
30.9
162
0.110
0.112
5KP110
122
149
5.0
110
2.0
25.5
196
5KP110A
122
135
5.0
110
2.0
28.2
177
0.112
5K P 120A
133
147
5.0
120
2.0
26.4
193
0.110
5K P 130A
144
159
5.0
130
2.0
24.4
209
0.110
5K P 150A
167
185
5.0
150
2.0
21.0
243
0.110
5K P 160A
178
197
5.0
160
2.0
19.7
259
0.110
5K P 170A
189
209
5.0
170
2.0
18.5
275
0.110
5K P 180A
200
221
5.0
180
2.0
17.5
292
0.110
5K P 190A
211
233
5.0
190
2.0
16.5
310
0.110
5K P 200A
222
246
5.0
200
2.0
15.5
329.2
0.110
5K P 210A
233
258
5.0
210
2.0
14.6
349.5
0.110
5K P 220A
244
270
5.0
220
2.0
13.7
371.1
0.110
5K P 250A
277
306
5.0
250
2.0
12.0
425
0.110
Notes:
1. V(BR) measured after IT applied for 300us, IT=square wave pulse or equivalent
2. Surge current waveform per Fig. 3 and derate per Fig. 2
3. All terms and symbols are consistent with ANSI/IEEE CA62.35
4. For parts without A, the VBR is +10%
Application:
The 5KP series of high power transient voltage suppressors were designed to be used on the output of switching power supplies. These devices may be used to
replace crowbar circuits. Both the 5 and 10 percent voltage tolerances are referenced to the power supply output voltage level.
They are able to withstand high levels of peak current while allowing a circuit breaker to trip or a fuse blow before shorting. This will enable the user to reset the
breaker or replace the fuse and continue operation. For this type operation, it is recommended that a sufficient mounting surface be used for dissipating the heat
generated by the Transient Voltage Suppressor during the transient or over-voltage condition.
Transient Voltage Suppressors are Silicon PN Junction devices designed for absorption of high voltage transients associated with power disturbances, switching and
induced lighting effects. This series is available from 5.0 volts thru 110 volts.
612
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)
613