Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: [email protected] GC140-4T..F-S BAR CLAMP FOR HOCKEY PUK DEVICES Clamping total thickness of assembly from 47mm to 107mm Pre-loaded to the specific clamping force (35 ÷ 50 kN) Maximum device diameter: 127mm Surface passivation to provide extra protection Hexagon head bolt partially threaded M8x1.25, UNI5737, 8.8 steel Various lengths of bolts and insulators Flat clamping head for minimum clamping head height User friendly clamping force indicator UL94 certified insulation material Parameter Weight Clamping Force* Unit Types g GC140-4TS..F-S kN Testing conditions Notes Values Min 35 GC140-4T..40F-S 40 GC140-4T..45F-S GC140-4T..50F-S 45 50 ± 10% VRMS UL File * 3000 E121562 Max. working temperature °C Creepage distance: mm Clearance distance: mm Storage temperature °C 110 -30 28 20.3 110 -40 mm UL94 V-1 Flame class rating 1.5 mm UL94 V-0 Flame class rating 8.00 mm CSA Flammability 1.00 Other clamping forces available: contact factory ** Noryl is a registered trade mark of General Electric Document GC140-4T..F-S 1 min Noryl ∗∗ Insulating Material Flammability Max 5900 GC140-4T..35F-S Clamping Force tolerance Insulation Voltage Typ 5750 GC140-4T..F-S BAR CLAMP FOR HOCKEY PUK DEVICES ORDERING INFORMATION TABLE GC140 Clamps can be ordered using the following part numbering system (3) Insulator code: (4) Bolt code: (3) Clamping force [kN]: 4T C B 45 (3) (2) (3) F-S see table below K K see table below 35 40 45 50 K: Total thickness of the assembly to be clamped The total thickness of the assembly to be clamped must be: S Min < K < S Max Suggested insulator/bolt types Allowed clearance S Insulator choice Bolt choice Max height S Max [mm] (3) Ins. Lenght [mm] (4) Bolt Length [mm] T [mm] 47 57 B 70 A 130 150 57 67 C 95 B 140 160 67 77 C 95 C 150 170 77 87 C 95 D 160 180 87 97 D 120 E 170 190 97 107 D 120 F 180 200 3 4 S Min [mm] In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GC140-4T..F-S GC140-4T..F-S BAR CLAMP FOR HOCKEY PUK DEVICES BAR CLAMP OUTLINES 85 25 14 Clamping force indicator 6 T Ø3 S Ø30 Ø12 25 Ø3 25 6 M8 170 60 Ø127 Max 35 60 Ø25 140 Dimensions in mm - Tolerances according to ISO 2768 MK Document GC140-4T..F-S