AU02JG FAST RECOVERY GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 600V CURRENT: 0.8A FEATURE R-1 Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL AU02JG units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc 600 420 600 V V V Maximum Average Forward Rectified Current 3/8" lead length at Ta =50°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (Note 1) If(av) 0.8 A Ifsm 25.0 A Vf 1.3 V 5.0 100.0 15.0 150 50.0 -55 to +150 µA µA Maximum Reverse Recovery Time (Note 2) Operating Temperature (Note 3) Storage and Operation Junction Temperature Ir Cj Trr Rth(ja) Tstg, Tj Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Test Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted pF nS °C /W °C RATINGS AND CHARACTERISTIC CURVES AU02JG 1 1