1N5391G THRU 1N5399G GENERAL PURPOSE GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.5A FEATURE DO-15\DO-204AC Molded case feature for auto insertion Glass Passivated junction High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL * Maximum Recurrent Peak Reverse Voltage Vrrm 1N53 91G 50 * Maximum RMS Voltage Vrms 35 70 140 210 280 350 420 560 700 V * Maximum DC blocking Voltage Vdc 50 100 200 300 400 500 600 800 1000 V * * * * * Maximum Average Forward Rectified Current 3/8”lead length at Ta =25°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at 1.5A Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage and Operation Junction Temperature 1N53 92G 100 1N53 93G 1N53 94G 1N53 95G 1N53 96G 1N53 97G 1N53 98G 1N53 99G units 200 300 400 500 600 800 1000 V If(av) 1.5 A Ifsm 50.0 A Vf 1.4 V Ir 10.0 200.0 µA µA Cj 15.0 pF R(ja) 50.0 °C/W Tstg -50 to +150 °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted * JEDEC Registered value Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1N5391G THRU 1N5399G 1 1 Rev.A1 www.gulfsemi.com