BYM26C SINTERED GLASS JUNCTION ULTRAFAST AVALANCHE RECTIFIER VOLTAGE: 600V CURRENT: 2.3A FEATURE SOD-64 Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Case: SOD-64 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL BYM26C units Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC blocking Voltage VDC 600 V Reverse Breakdown Voltage at IR = 0.1mA Maximum Average Forward Rectified Current and Ttp=55°C; lead length=10mm V(BR)R 700min V IFAV 2.3 A Peak Forward Surge Current at t=10ms half sine wave IFSM 45 A Maximum Forward Voltage at Rated Forward Current and 25°C IF = 2.0A VF 2.65 V Maximum DC Reverse Current at rated DC blocking voltage IR 10 150 µA Trr 30 nS Non Repetitive Reverse Avalanche Energy ER 10 mJ Diode Capacitance at f=1MHz,VR=0V Cd 85 pF Rth(ja) 75 K/W Tstg, Tj -65 to +175 ℃ Ta = 25°C Ta = 150°C Maximum Reverse Recovery Time Typical Thermal Resistance (Note 1) (Note 2) Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick; thickness of Cu-layer≥40μm Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYM26C Rev.A1 www.gulfsemi.com