GS1J-E THRU GS1M-E SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE： ：600V to 1000V CURRENT： ： 1.0A SMA／ ／DO-214AC FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Halogen Free MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case ： Molded with UL-94 class V-0 recognized Halogen Free Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) (Note 3) Storage and Operating Junction Temperature SYMBOL GS1J-E GS1K-E GS1M-E units Vrrm Vrms Vdc 600 420 600 800 560 800 1000 700 1000 V V V If(av) 1.0 A Ifsm 30.0 A Vf 1.1 V Ir Cj Rth(jl) Rth(jc) Tj, Tstg 5.0 200.0 15.0 30 50 -50 to +150 µA pF ℃/W ℃ Note： 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area 3. Junction to Case Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GS1J-E THRU GS1M-E Rev.A1 www.gulfsemi.com