GR3A THRU GR3M SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE: :50 TO 1000V CURRENT: : 3.0A SMC/ /DO-214AB FEATURE Ideal for surface mount pick and place applications Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Fast recovery time for high efficiency MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20%) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =75℃ Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature SYMBOL GR 3A GR 3B GR 3D GR 3G GR 3J GR 3K GR 3M units Vrrm 50 100 200 400 600 800 1000 V Vrms 35 70 140 280 420 560 700 V Vdc 50 100 200 400 600 800 1000 V If(av) 3.0 A Ifsm 100.0 A Vf 1.3 V Ir 10.0 350.0 μA μA Trr 150 250 500 nS Cj 60.0 pF Rth(jl) 15.0 ℃//W Tstg, Tj -50 to +150 ℃ Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GR3A THRU GR3M 1 1 1Rev.A5 www.gulfsemi.com