SB36L-A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 60V CURRENT: 3.0A SMA/DO--214AC FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guard ring for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals MECHANICAL DATA Case: JEDEC SMA/DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.002 ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL SB36L-A units Maximum Recurrent Peak Reverse Voltage Vrrm 60 V Maximum RMS Voltage Vrms 42 V Vdc 60 V If(av) 3.0 A Ifsm 100.0 A Maximum Forward Voltage at rated Forward current Vf 0.6 V Maximum DC Reverse Current at rated DC blocking voltage Ir 0.5 10.0 mA Rth(ja) 75.0 ºC/W Tstg, Tj -55 to +150 ºC Maximum DC blocking Voltage Maximum Average Forward Rectified 3/8”lead length at TL =105ºC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Typical Thermal Resistance Current Ta =25ºC Ta =100ºC (Note 1) Storage and Operating Junction Temperature range NOTE: 1. Rev.A1 P.C.B. mounted with 0.2 x 0.2inches(5.0 x 5.0mm) copper pad areas www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB36L-A Rev.A1 www.gulfsemi.com