MU3D SURFACE MOUNT ULTRAFAST RECTIFIER VOLTAGE： ：200V CURRENT： ： 3.0A FEATURE Plastic package has Underwriters Laboratories Flammability Classification 94VIdeally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultrafast recovery time for high efficiency High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip SMC／ ／DO— —214AB MECHANICAL DATA Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Case:JEDEC DO-214AB molded plastic body over passivated chip Polarity:Color band denotes cathode end Weight: 0.007 ounce, 0.21 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified TL =140℃ Current 3/8″lead length at : TL =130℃ Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current TJ =25℃ If =3.0A Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =150℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance, junction to lead Storage and Operating Junction Temperature SYMBO L MU3D units Vrrm 200 V Vrms 140 V Vdc 200 3.0 4.0 V Ifsm 125.0 A Vf 0.875 V Ir 5.0 150.0 μA μA Trr 25 nS If(av) A Cj 80 pF R(jl) 11 ℃/W Tstg, Tj -50 to +175 ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES MU3D 1 1 Rev.A1 www.gulfsemi.com